LTL-4231NLC-E - LITE-ON ELECTRONICS

ECL

www.vishay.com Vishay Roederstein

Revision: 15-Jul-16 1Document Number: 25020

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Aluminum Capacitors

FEATURES

• Load life: 2000 h at 105 °C

• Extra low impedance, high ripple current

• Polarized SMD aluminum electrolytic capacitors, 

non solid electrolyte

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• SMD technology, for high mounting density

• Industrial and professional applications

• General industrial, consumer

• Smoothing, filtering, buffering

PACKAGING

Supplied in blister tape.

QUICK REFERENCE DATA

DESCRIPTION VALUE

Nominal case size

(Ø D x L in mm ) 6 x 5.8 to 12.5 x 13.5

Rated capacitance range CR10 μF to 1500 μF

Capacitance tolerance ± 20 %

Rated voltage range 6.3 V to 50 V

Category temperature range -40 °C to 105 °C

Load life 2000 h

Based on sectional

specification IEC 60384-4 / EN 130300

Climatic category

IEC 60068 40 / 105 / 56

SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)

(μF)

RATED VOLTAGE (V)

6.31016253550

10 6.3 x 5.8

22 6.3 x 5.8

33 6.3 x 5.8 8 x 6.2

47 6.3 x 5.8 8 x 6.2

68 6.3 x 5.8 8 x 6.2 8 x 10

100 6.3 x 5.8 8 x 6.2 8 x 10 10 x 10

220 6.3 x 5.8 6.3 x 7.7 8 x 6.2 8 x 10 10 x 10 -

330 8 x 6.2 8 x 10 - - -

470 8 x 10 10 x 10 - - -

680 10 x 10 - - - -

1000 10 x 10 - - - - -

1500 10 x 10 - - - - -

ECL

www.vishay.com Vishay Roederstein

Revision: 15-Jul-16 2Document Number: 25020

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Unless otherwise specified, all electrical values apply at

Tamb = 20 °C, P = 86 to 100 kPa, RH = 45 to 75 %.

ORDERING EXAMPLE

ECL 22 μF / 50 V, ± 20 %, size 6.3 x 5.8 mm

Ordering code: MALSECL00AD222HARK

For Standard Packaging Quantity (SPQ) and Minimum Order

Quantity (MOQ) please refer to our price list or contact

customer service.

DIMENSIONS in millimeters

CASE SIZE

CODE D ± L ± A ± B ± C ± E ± RNP

AD 6.3 ± 0.5 5.8 ± 0.3 2.4 ± 0.2 6.6 ± 0.2 6.6 ± 0.2 2.2 ± 0.2 0.5 to 0.8 0.3 0.5

BM 6.3 ± 0.5 7.7 ± 0.4 2.4 ± 0.2 6.6 ± 0.2 6.6 ± 0.2 2.2 ± 0.2 0.5 to 0.8 0.3 0.5

AE 8 ± 0.5 6.2 ± 0.4 3.3 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 2.3 ± 0.2 0.5 to 0.8 0.3 0.5

AF 8 ± 0.5 10 ± 0.5 2.9 ± 0.2 8.3 ± 0.2 8.3 ± 0.2 3.1 ± 0.2 0.8 to 1.1 0.3 0.5

AG 10 ± 0.5 10 ± 0.5 3.2 ± 0.2 10.3 ± 0.2 10.3 ± 0.2 4.5 ± 0.2 0.8 to 1.1 0.3 0.5

AH 12.5 ± 0.5 13.5 ± 0.5 4.6 ± 0.2 12.8 ± 0.2 12.8 ± 0.2 4.5 ± 0.2 1.1 to 1.4 0.3 0.5

Ø D ± α

B ± α

A ± α

C ± α

Capacitance

Lot no. Voltage

Plastic plateform

L ± α

E ± α

N max. P max.

Positive

Negative

22 A

ELECTRICAL DATA

SYMBOL DESCRIPTION

URRated voltage

CRRated capacitance at 120 Hz

tan Max. dissipation factor at 120 Hz

RESR Max. equivalent series resistance at 120 Hz

IRRated alternating current at 120 Hz and upper

category temperature

Z Max. impedance at 100 kHz

ELECTRICAL DATA AND ORDERING INFORMATION

(V)

120 Hz

(μF)

DIMENSIONS

D x L

(mm)

tan 

120 Hz

100 kHz /

20 °C

()

100 kHz /

105 °C

(mA)

WEIGHT

(g) CATALOG NUMBER

6.3

220 6.3 x 5.8 0.24 0.44 230 0.30 MALSECL00AD322BARK

330 8 x 6.2 0.24 0.26 300 0.55 MALSECL00AE333BARK

1000 10 x 10 0.24 0.09 670 1.21 MALSECL00AG410BARK

1500 10 x 10 0.24 0.09 670 1.21 MALSECL00AG415BARK

220 6.3 x 7.7 0.19 0.34 280 0.40 MALSECL00BM322CARK

470 8 x 10 0.19 0.17 450 1.00 MALSECL00AF347CARK

680 10 x 10 0.19 0.09 670 1.21 MALSECL00AG368CARK

100 6.3 x 5.8 0.16 0.44 230 0.30 MALSECL00AD310DARK

220 8 x 6.2 0.16 0.26 300 0.55 MALSECL00AE322DARK

330 8 x 10 0.16 0.17 450 1.00 MALSECL00AF333DARK

470 10 x 10 0.16 0.09 670 1.21 MALSECL00AG347DARK

ECL

www.vishay.com Vishay Roederstein

Revision: 15-Jul-16 3Document Number: 25020

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

REFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS

68 6.3 x 5.8 0.14 0.44 230 0.30 MALSECL00AD268EARK

100 8 x 6.2 0.14 0.26 300 0.55 MALSECL00AE310EARK

220 8 x 10 0.14 0.17 450 1.00 MALSECL00AF322EARK

33 6.3 x 5.8 0.12 0.44 230 0.30 MALSECL00AD233FARK

47 6.3 x 5.8 0.12 0.44 230 0.30 MALSECL00AD247FARK

68 8 x 6.2 0.12 0.26 300 0.55 MALSECL00AE268FARK

100 8 x 10 0.12 0.17 450 1.00 MALSECL00AF310FARK

220 10 x 10 0.12 0.09 670 1.21 MALSECL00AG322FARK

10 6.3 x 5.8 0.12 0.88 165 0.30 MALSECL00AD210HARK

22 6.3 x 5.8 0.12 0.88 165 0.30 MALSECL00AD222HARK

33 8 x 6.2 0.12 0.63 300 0.55 MALSECL00AE233HARK

47 8 x 6.2 0.12 0.63 300 0.55 MALSECL00AE247HARK

68 8 x 10 0.12 0.34 450 1.00 MALSECL00AF268HARK

100 10 x 10 0.12 0.18 670 1.21 MALSECL00AG310HARK

PROFILE FEATURE

SOLDERING CONDITION

Ø 4 TO Ø 10 Ø 12.5 Ø 16

Average ramp-up rate (TL to TP) 3 °C/s max. 3 °C/s max.

Preheat

Temperature min. (Ts min.) 150 °C 150 °C

Temperature max. (Ts max.) 200 °C 200 °C

Time (Ts min. to Ts max.) 60 s to 150 s 40 s to 120 s 40 s to 100 s

Ts max. to TL

Ramp-up rate 3 °C/s max. 3 °C/s max.

Time maintained above

Temperature (TL) 217 °C 217 °C

Time (tL) 60 s to 90 s 40 s to 60 s

Peak / classification temperature (TP) 250 °C 240 °C 230 °C

Time within 5 °C of actual peak temperature (TP) 10 s max. 10 s max.

Ramp-down rate 3 °C/s max. 3 °C/s max.

Time 25 °C to peak temperature 8 min max. 8 min max.

ELECTRICAL DATA AND ORDERING INFORMATION

(V)

120 Hz

(μF)

DIMENSIONS

D x L

(mm)

tan 

120 Hz

100 kHz /

20 °C

()

100 kHz /

105 °C

(mA)

WEIGHT

(g) CATALOG NUMBER

Ramp-up

Ramp-down

min.

max.

Preheat

Critical Zone

to T

t 25 °C to Peak

Time

Temperature

ECL

www.vishay.com Vishay Roederstein

Revision: 15-Jul-16 4Document Number: 25020

For technical questions, contact: aluminumcaps1@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000



Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the

lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.

RESISTANCE TO SOLDERING HEAT

Leakage current Less than specified value

Capacitance value Within ± 10 % of initial value

tan Less than specified value

LOW TEMPERATURE BEHAVIOR (at 120 Hz)

IMPEDANCE RATIO

(Z) T2/(Z) T1 RATED VOLTAGE (V)

T2/T1 6.3101625355063100

-25 °C / +20 °C22222233

-40 °C / +20 °C33333344

MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY

FREQUENCY (Hz) IR MULTIPLIER

50 0.41

120 0.59

300 0.69

1000 0.80

10 000 0.88

100 000 1.00

ADDITIONAL ELECTRICAL DATA

PARAMETER CONDITIONS VALUE

Current

Leakage current

(test conditions: UR, 20 °C) After 2 min at URIL2  0.01 x CR x URor 3 μA for UR  100 V (whichever is greater)

Resistance

Equivalent series resistance

(ESR) Calculated from tan max. ESR = tan /2  f CR

TEST PROCEDURES AND REQUIREMENTS

TEST PROCEDURE

(quick reference) REQUIREMENTS

Load life

Tamb = 105 °C

UR and IR applied

After 2000 h

C/C: ± 25 % of initial value

IL  spec. limit

tan   2 x spec. limit

Shelf life

No voltage applied

After 1000 h

After test: UR to be applied for 30 min

24 h to 48 h before measurement

C/C: ± 25 % of initial value

IL  spec. limit

tan   2 x spec. limit

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.