W83195AR-25
200MHZ 3-DIMM CLOCK FOR SOLANO CHIPSET
Publication Release Date:Jan. 2000
W83195AR-25
Data Sheet Revision History
Pages Dates Version Version
on Web
Main Contents
1 n.a. n.a. All of the versions before 0.50 are for internal use.
2 n.a. 02/Apr 1.0 1.0 Change version and version on web site to 1.0
3
4
5
6
7
8
9
10
Please note that all data and specifications are subject to change without notice. All the trademarks of
products and companies mentioned in this data sheet belong to their respective owners.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where
malfunction of these products can reasonably be expected to result in personal injury. Winbond
customers using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify Winbond for any damages resulting from such improper use or sales.
- 1 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
1.0 GENERAL DESCRIPTION
The W83195AR-25 is a Clock Synthesizer for Intel 815 Solano chipset. W83195AR-25 provides all
clocks required for high-speed RISC or CISC microprocessor and also provides 64 different
frequencies of CPU, SDRAM, PCI, 3V66, IOAPIC clocks frequency setting. All clocks are externally
selectable with smooth transitions.
The W83195AR-25 provides I2C serial bus interface to program the registers to enable or disable
each clock outputs and provides 0.25% and 0.5% center type spread spectrum to reduce EMI.
The W83195AR-25 accepts a 14.318 MHz reference crystal as its input and runs on a 3.3V supply.
High drive PCI and SDRAM CLOCK outputs typically provide greater than 1 V /ns slew rate into 30 pF
loads. CPU CLOCK outputs typically provide better than 1 V /ns slew rate into 20 pF loads as
maintaining 50± 5% duty cycle. The fixed frequency outputs as REF, 24MHz, and 48 MHz provide
better than 0.5V /ns slew rate.
2.0 PRODUCT FEATURES
• 2 CPU clocks (2.5V)
• 3 3V-66 clocks (3.3V)
• 12 SDRAM clocks for 3 DIMMs(3.3V)
• 8 PCI synchronous clocks.
• Optional single or mixed supply:
(VDDR = VDDP=VDDS = VDD48 = VDD3 = 3.3V, VDDA=VDDC=2.5V)
• Skew form CPU to PCI clock -1 to 4 ns, center 2.6 ns
• Smooth frequency switch with selections from 66.8 to 200MHz
• I2C 2-Wire serial interface and I2C read back
• 0.25% center and 0.5% center type spread spectrum
• Programmable registers to enable/stop each output and select modes
(mode as Tri-state or Normal )
• 48 MHz for USB
• 24 MHz for super I/O
• Packaged in 56-pin SSOP
- 2 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
3.0 PIN CONFIGURATION
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
VDDR
VSS
Xin
Xout
VDD3
PCICLK0/ *FS0
VSS
PCICLK6
PCICLK2/SEL24_48*
PCICLK3^
PCICLK4^
SDRAM_F
VSS
3V66-0
VDDP
PD#
*SDATA
*SDCLK
VddA
REF0/ *FS4^
IOAPIC
VSS
CPUCLK0
VDDC
CPUCLK1
VSS
SDRAM 0
SDRAM 1
SDRAM 2
VDDS
SDRAM 3
VSS
SDRAM 4
SDRAM 5
SDRAM 6
SDRAM 7
VSS
VDDS
48MHz/ *FS3 ^
24_48MHz/ *FS2
PCICLK5^
VDD48
VSS
3V66-1
VDDP
PCICLK1/ *FS1
PCICLK7
VSS VSS
VDDS
VDDS
SDRAM 8
SDRAM 9
SDRAM 11
SDRAM 10
49
50
51
52
53
54
55
56
3V66-2
Note: * Internal pull-up
^ 1.5~2 strength
- 3 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
4.0 PIN DESCRIPTION
IN - Input
OUT - Output
I/O - Bi-directional Pin
# - Active Low
* - Internal 250kΩ pull-up
4.1 Crystal I/O
SYMBOL PIN I/O FUNCTION
Xin 2 IN Crystal input with internal loading capacitors(36pF)
and feedback resistors.
Xout 3 OUT Crystal output at 14.318MHz nominally with internal
loading capacitors(36pF).
4.2 CPU, SDRAM, PCI, IOAPIC Clock Outputs
SYMBOL PIN I/O FUNCTION
CPUCLK [0:1] 52,51 OUT Low skew (< 250ps) clock outputs for host
frequencies such as CPU and Chipset.
PD# 22 IN Power Down mode when driven low.
IOAPIC
54 OUT Clock outputs synchronous with PCI clock and
powered by VddA.
SDRAM_F,
SDRAM[0:11]
38, 48,47,46,
44,43,42,40,
39,31, 30,27,
26
OUT SDRAM clock outputs.
PCICLK0/ *FS0 11 I/O 3.3V 33MHz PCI clock during normal operation.
Latched input for FS0 at initial power up for H/W
selecting the output frequency of CPU, SDRAM and
PCI clocks(Default=1).
PCICLK1/ FS1# 12 I/O Low skew (< 250ps) PCI clock outputs.
Latched input for FS1 at initial power up for H/W
selecting the output frequency of CPU, SDRAM and
PCI clocks(Default=0).
PCICLK2/ *SEL24_48 12 I/O Low skew (< 250ps) PCI clock outputs.
Latched input for SEL24_48 at initial power up for the
output frequency of 24MHz(HIGH) and 48MHz(LOW)
clocks.
PCICLK [ 3:7 ] 15,16,17,19,20 OUT Low skew (< 250ps) PCI clock outputs.
3V66 [0:2] 6,7,8 OUT 3.3V output clocks for the chipset.
- 4 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
4.3 I2C Control Interface
SYMBOL PIN I/O FUNCTION
*SDATA 24 I/O Serial data of I2C 2-wire control interface with internal
pull-up resistor.
*SDCLK 23 IN Serial clock of I2C 2-wire control interface with
internal pull-up resistor.
4.4 Fixed Frequency Outputs
SYMBOL PIN I/O FUNCTION
REF0 / *FS4 56 I/O 14.318MHz reference clock. This REF output is the
stronger buffer for ISA bus loads.
Latched input for FS4 at initial power up for H/W
selecting the output frequency of CPU, SDRAM and
PCI clocks (Default=1).
24_48MHz/FS2* 23 I/O 24MHz or 48MHz output clock. Default is 24MHz.
Latched input for FS2 at initial power up for H/W
selecting the output frequency of CPU, SDRAM and
PCI clocks(Default=1).
48MHz/ FS3* 22 I/O 48MHz / Latched input for FS3 at initial power up for
H/W selecting the output frequency of CPU, SDRAM
and PCI clocks (Default=1).
4.5 Power Pins
SYMBOL PIN FUNCTION
VddC 53 Power supply for CPU & IOAPIC, 2.5V or 3.3V.
Vdd48 33 Power supply for 48MHz output,3.3V.
Vdd3 9 Power supply for 3V_66 output, 3.3V.
VddP 10,18 Power supply for PCICLK, 3.3V.
VddR 1 Power supply for REF0, 3.3V.
VddS 45,37,32,25 Power supply for SDRAM_F,SDRAM[0:11], nominal
3.3V.
Vss 4,5,14,21,28,29,36,
41, 49.50
Circuit Ground.
- 5 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
5.0 FREQUENCY SELECTION BY HARDWARE
FS4 FS3 FS2 FS1 FS0 CPU(MHz) SDRAM(MHz) 3V66(MHz) PCI(MHz) IOAPIC
(MHz)
0 0 0 0 0 55.00 82.50 55.00 27.50 13.75
0 0 0 0 1 60.00 90.00 60.00 30.00 15.00
0 0 0 1 0 66.80 100.20 66.80 33.40 16.70
0 0 0 1 1 68.33 102.50 68.33 34.17 17.08
0 0 1 0 0 70.00 105.00 70.00 35.00 17.50
0 0 1 0 1 72.00 108.00 72.00 36.00 18.00
0 0 1 1 0 75.00 112.50 75.00 37.50 18.75
0 0 1 1 1 77.00 115.50 77.00 38.50 19.25
0 1 0 0 0 83.30 83.30 55.53 27.77 13.88
0 1 0 0 1 90.00 90.00 60.00 30.00 15.00
0 1 0 1 0 100.30 100.30 66.87 33.43 16.72
0 1 0 1 1 103.00 103.00 68.67 34.33 17.17
0 1 1 0 0 112.50 112.50 75.00 37.50 18.75
0 1 1 0 1 115.00 115.00 76.67 38.33 19.17
0 1 1 1 0 120.00 120.00 80.00 40.00 20.00
0 1 1 1 1 125.00 125.00 83.33 41.67 20.83
1 0 0 0 0 128.00 128.00 64.00 32.00 16.00
1 0 0 0 1 130.00 130.00 65.00 32.50 16.25
1 0 0 1 0 133.70 133.70 66.85 33.43 16.71
1 0 0 1 1 137.00 137.00 68.50 34.25 17.13
1 0 1 0 0 140.00 140.00 70.00 35.00 17.50
1 0 1 0 1 145.00 145.00 72.50 36.25 18.13
1 0 1 1 0 150.00 150.00 75.00 37.50 18.75
1 0 1 1 1 153.33 153.33 76.67 38.33 19.17
1 1 0 0 0 125.00 93.75 62.50 31.25 15.63
1 1 0 0 1 130.00 97.50 65.00 32.50 16.25
1 1 0 1 0 133.70 100.28 66.85 33.43 16.71
1 1 0 1 1 137.00 102.75 68.50 34.25 17.13
1 1 1 0 0 140.00 105.00 70.00 35.00 17.50
1 1 1 0 1 145.00 108.75 72.50 36.25 18.13
1 1 1 1 0 150.00 112.50 75.00 37.50 18.75
1 1 1 1 1 153.33 115.00 76.67 38.33 19.17
- 6 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
6. SERIAL CONTROL REGISTERS
The Pin column lists the affected pin number and the @PowerUp column gives the state at true power
up. Registers are set to the values shown only on true power up. "Command Code" byte and "Byte
Count" byte must be sent following the acknowledge of the Address Byte. Although the data (bits) in
these two bytes are considered "don't care", they must be sent and will be acknowledge. After that,
the below described sequence (Register 0, Register 1, Register 2, ....) will be valid and acknowledged.
Frequency Table Setting by I2C (SEL5 ~ SEL0)
SSEL5 SSEL4 SSEL3 SSEL2 SSEL1 SSEL0 CPU
(MHz)
SDRAM
(MHz)
3V66
(MHz)
PCI(MHz) IOAPIC
(MHz)
0 0 0 0 0 0 55.00 82.50 55.00 27.50 13.75
0 0 0 0 0 1 60.00 90.00 60.00 30.00 15.00
0 0 0 0 1 0 66.80 100.20 66.80 33.40 16.70
0 0 0 0 1 1 68.33 102.50 68.33 34.17 17.08
0 0 0 1 0 0 70.00 105.00 70.00 35.00 17.50
0 0 0 1 0 1 72.00 108.00 72.00 36.00 18.00
0 0 0 1 1 0 75.00 112.50 75.00 37.50 18.75
0 0 0 1 1 1 77.00 115.50 77.00 38.50 19.25
0 0 1 0 0 0 83.30 83.30 55.53 27.77 13.88
0 0 1 0 0 1 90.00 90.00 60.00 30.00 15.00
0 0 1 0 1 0 100.30 100.30 66.87 33.43 16.72
0 0 1 0 1 1 103.00 103.00 68.67 34.33 17.17
0 0 1 1 0 0 112.50 112.50 75.00 37.50 18.75
0 0 1 1 0 1 115.00 115.00 76.67 38.33 19.17
0 0 1 1 1 0 120.00 120.00 80.00 40.00 20.00
0 0 1 1 1 1 125.00 125.00 83.33 41.67 20.83
0 1 0 0 0 0 128.00 128.00 64.00 32.00 16.00
0 1 0 0 0 1 130.00 130.00 65.00 32.50 16.25
0 1 0 0 1 0 133.70 133.70 66.85 33.43 16.71
0 1 0 0 1 1 137.00 137.00 68.50 34.25 17.13
0 1 0 1 0 0 140.00 140.00 70.00 35.00 17.50
0 1 0 1 0 1 145.00 145.00 72.50 36.25 18.13
0 1 0 1 1 0 150.00 150.00 75.00 37.50 18.75
0 1 0 1 1 1 153.33 153.33 76.67 38.33 19.17
0 1 1 0 0 0 125.00 93.75 62.50 31.25 15.63
0 1 1 0 0 1 130.00 97.50 65.00 32.50 16.25
0 1 1 0 1 0 133.70 100.28 66.85 33.43 16.71
0 1 1 0 1 1 137.00 102.75 68.50 34.25 17.13
0 1 1 1 0 0 140.00 105.00 70.00 35.00 17.50
0 1 1 1 0 1 145.00 108.75 72.50 36.25 18.13
0 1 1 1 1 0 150.00 112.50 75.00 37.50 18.75
0 1 1 1 1 1 153.33 115.00 76.67 38.33 19.17
- 7 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
SSEL5 SSEL4 SSEL3 SSEL2 SSEL1 SSEL0 CPU
(MHz)
SDRAM
(MHz)
3V66
(MHz)
PCI(MHz) IOAPIC
(MHz)
1 0 0 0 0 0 66.8 133.00 66.80 33.40 16.70
1 0 0 0 0 1 135.00 135.00 67.50 33.75 16.88
1 0 0 0 1 0 142.00 142.00 71.00 35.50 17.75
1 0 0 0 1 1 143.00 143.00 71.50 35.75 17.88
1 0 0 1 0 0 144.00 144.00 72.00 36.00 18.00
1 0 0 1 0 1 146.00 146.00 73.00 36.50 18.25
1 0 0 1 1 0 147.00 147.00 73.50 36.75 18.38
1 0 0 1 1 1 148.00 148.00 74.00 37.00 18.50
1 0 1 0 0 0 100.20 133.00 66.80 33.40 16.70
1 0 1 0 0 1 156.00 156.00 78.00 39.00 19.50
1 0 1 0 1 0 158.00 158.00 79.00 39.50 19.75
1 0 1 0 1 1 160.00 160.00 80.00 40.00 20.00
1 0 1 1 0 0 135.00 101.25 67.50 33.75 16.88
1 0 1 1 0 1 139.00 104.25 69.50 34.75 17.38
1 0 1 1 1 0 141.00 105.75 70.50 35.25 17.63
1 0 1 1 1 1 142.00 106.50 71.00 35.50 17.75
1 1 0 0 0 0 143.00 107.25 71.50 35.75 17.88
1 1 0 0 0 1 144.00 108.00 72.00 36.00 18.00
1 1 0 0 1 0 146.00 109.50 73.00 36.50 18.25
1 1 0 0 1 1 147.00 110.25 73.50 36.75 18.38
1 1 0 1 0 0 148.00 111.00 74.00 37.00 18.50
1 1 0 1 0 1 149.00 111.75 74.50 37.25 18.63
1 1 0 1 1 0 153.00 114.75 76.50 38.25 19.13
1 1 0 1 1 1 157.00 117.75 78.50 39.25 19.63
1 1 1 0 0 0 159.00 119.25 79.50 39.75 19.88
1 1 1 0 0 1 162.00 121.50 81.00 40.50 20.25
1 1 1 0 1 0 164.00 123.00 82.00 41.00 20.50
1 1 1 0 1 1 170.00 127.50 85.00 42.50 21.25
1 1 1 1 0 0 175.00 116.67 58.30 29.15 14.58
1 1 1 1 0 1 180.00 120.00 60.00 30.00 15.00
1 1 1 1 1 0 190.00 95.00 63.33 31.67 15.83
1 1 1 1 1 1 200.40 133.60 66.80 33.40 16.70
- 8 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
6.1 Register 0: CPU Frequency Select Register
Bit @PowerUp Pin Description
7 0 - SSEL3 (Frequency table selection by software via I2C )
6 0 - SSEL2 ( Frequency table selection by software via I2C)
5 0 - SSEL1 ( Frequency table selection by software via I2C)
4 0 - SSEL0 ( Frequency table selection by software via I2C)
3 0 - 0 = Selection by hardware
1 = Selection by software I2C - Bit (2, 7:4)
2 0 - SSEL4 (Frequency table selection by software via I2C )
1 0 -
SSEL5 (Frequency table selection by software via I2C )
0 0 - 0 = Running
1 = Tristate all outputs
6.2 Register 1 : CPU Clock Register (1 = Active, 0 = Inactive)
Bit @PowerUp Pin escription
7 X - FS3#
6 X - FS0#
5 X - FS2#
4 1 27 24MHz(Active / Inactive)
3 1 26 48MHz(Active / Inactive)
2 1 -
1 = ±0.25% Center type Spread Spectrum Modulation
0 = ±0.5% Center type Spread Spectrum Modulation
1 0 - 0 = Normal
1 = Spread Spectrum enabled
0 1 - Reserved
6.3 Register 2: SDRAM Clock Register (1 = Active, 0 = Inactive)
Bit @PowerUp Pin Description
7 1 39 SDRAM7 (Active / Inactive)
6 1 40 SDRAM6 (Active / Inactive)
5 1 42 SDRAM5 (Active / Inactive)
4 1 43 SDRAM4 (Active / Inactive)
3 1 44 SDRAM3 (Active / Inactive)
2 1 46 SDRAM2 (Active / Inactive)
1 1 47 SDRAM1 (Active / Inactive)
0 1 48 SDRAM0 (Active / Inactive)
- 9 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
6.4 Register 3: PCI Clock Register (1 = Active, 0 = Inactive)
Bit @PowerUp Pin Description
7 1 20 PCICLK7 (Active / Inactive)
6 1 19 PCICLK6 (Active / Inactive)
5 1 17 PCICLK5 (Active / Inactive)
4 1 16 PCICLK4 (Active / Inactive)
3 1 15 PCICLK3 (Active / Inactive)
2 1 13 PCICLK2 (Active / Inactive)
1 1 12 PCICLK1 (Active / Inactive)
0 1 11 PCICLK0 (Active / Inactive)
6.5 Register 4: Additional Register (1 = Active, 0 = Inactive)
Bit @PowerUp Pin Description
7 1
- Reserved
6 1 7 3V66_0(Active / Inactive)
5 1
8 3V66_1(Active / Inactive)
4 X
- FS4#
3 1 46
IOAPIC (Active / Inactive)
2 X
- FS1#
1 1 43 CPUCLK1(Active / Inactive)
0 1 44 CPUCLK0(Active / Inactive)
6.6 Register 5: SDRAM Clock Register (1 = Active, 0 = Inactive)
Bit @PowerUp Pin Description
7 1 -
SKEW2(SDRAM to CPU Skew programming bit)
6 0 -
SKEW1(SDRAM to CPU Skew programming bit)
5 0 -
SKEW0(SDRAM to CPU Skew programming bit)
4 1
38 SDRAM_F (Active / Inactive)
3 1 26 SDRAM11 (Active / Inactive)
2 1 27 SDRAM10 (Active / Inactive)
1 1 30 SDRAM9 (Active / Inactive)
0 1 31 SDRAM8 (Active / Inactive)
- 10 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
6.7 Register 6: Winbond Chip ID Register (Read Only)
Bit @PowerUp Pin Description
7 1 - Winbond Chip ID
6 0 - Winbond Chip ID
5 0 - Winbond Chip ID
4 1 - Winbond Chip ID
3 1 - Winbond Chip ID
2 0 - Winbond Chip ID
1 0 - Winbond Chip ID
0 0 - Winbond Chip ID
6.8 Register 7: Winbond Chip ID Register (Read Only)
Bit @PowerUp Pin Description
7 0 - Winbond Chip ID
6 1 - Winbond Chip ID
5 0 - Winbond Chip ID
4 1 - Winbond Chip ID
3 0 - Winbond Version ID
2 0 - Winbond Version ID
1 0 - Winbond Version ID
0 1 - Winbond Version ID
- 11 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
7.0 SPECIFICATIONS
7.1 Absolute Maximum Ratings
Stresses greater than those listed in this table may cause permanent damage to the device.
Precautions should be taken to avoid application of any voltage higher than the maximum rated
voltages to this circuit. Maximum conditions for extended periods may affect reliability. Unused inputs
must always be tied to an appropriate logic voltage level (Ground or Vdd).
Symbol Parameter Rating
Vdd , VIN Voltage on any pin with respect to GND - 0.5 V to + 7.0 V
TSTG Storage Temperature - 65°C to + 150°C
TB Ambient Temperature - 55°C to + 125°C
TA Operating Temperature 0°C to + 70°C
7.2 Electronical Characteristics---Input/Output
Vddq1=Vddq2 = Vddq3 = Vddq4 =3.3V, VddL1 =VddL2= 2.5V , TA = 0
°
C to +70
°
C
Parameter Symbol Min Typ Max Units Test Conditions
Input Low Voltage VIL Vss-0.3 0.8 Vdc
Input High Voltage VIH 2.0 Vdd+0.3
Vdc
Input Low Current IIL -5 µA No pull-up resistors
Input Low Current IIL -200 µA Pull-up resistros
Input High Current IIH -5 5 µA
Input Capacitance CIN 5 pF Logic inputs
C
OUT 6 pF Output capacitance
C
INX 27 45 pF Xin and Xout
Operating Supply
Current
Idd3 100 MA CPU = 66.6 MHz
PCI = 33.3 Mhz with load
Power Down Supply
Current
Idd2 600
µA
Settling Time Ts 3 mS From first crossing to 1% target
freq.
Delay tPZH,tPZH 1 10 nS Output enable delay
t
PLZ,tPZH 1 10 nS Output enable delay
- 12 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
7.3 Electronical Characteristics of CPU Clock
Vdd=2.5V +/- 5%; CL=10-20pF
Parameter Symbol Min Typ Max Units Test Conditions
Ouput Impedance RDSP 13.5 40 Ohm
Ouput Impedance RDSN 13.5 40 Ohm
Output Low Voltage VOL 0.4 V IOL=1mA
Output High Voltage VOH 2.0 V IOH=-1mA
Output Low Current IOL 27 30 MA
Output High Current IOH -27 -27 MA
Pull-Up Current Min IOH(min) -27 MA Vout = 1.0 V
Pull-Up Current Max IOH(max) -27 MA Vout = 2.0V
Rise/Fall Time Min
Between 0.4 V and 2.0 V
TRF(min) 0.4 ns 10pF Load
Rise/Fall Time Max
Between 0.4 V and 2.0 V
TRF(max) 1.6 ns 20pF Load
Duty Cycle Dt 45 55 % VT=1.25V
Skew TSK 175 ps VT=1.25V
Jitter Tsc-c 250 ps VT=1.25V
7.4 Electronical Characteristics of 3V66 Clock
Vdd=3.3V +/- 5%; CL=10-30pF
Parameter Symbol Min Typ Max Units Test Conditions
Ouput Impedance RDSP 15 55 Ohm
Ouput Impedance RDSN 15 55 Ohm
Output Low Voltage VOL 0.55 V IOL=1mA
Output High Voltage VOH 2.4 V IOH=-1mA
Output Low Current IOL 30 38 MA
Output High Current IOH -33 -33 MA
Rise/Fall Time Min
Between 0.4 V and 2.0 V
TRF(min) 0.4 ns 10pF Load
Rise/Fall Time Max
Between 0.4 V and 2.0 V
TRF(max) 1.6 ns 20pF Load
Duty Cycle Dt 45 55 % VT=1.5V
Skew TSK 175 ps VT=1.5V
Jitter Tsc-c 500 ps VT=1.5V
- 13 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
7.5 Electronical Characteristics of SDRAM Clock
Vdd=3.3V +/- 5%; CL=20-30pF
Parameter Symbol Min Typ Max Units Test Conditions
Ouput Impedance RDSP 13.5 40 Ohm
Ouput Impedance RDSN 13.5 40 Ohm
Output Low Voltage VOL 0.45 V IOL=1mA
Output High Voltage VOH 2.4 V IOH=-1mA
Output Low Current IOL 54 54 MA
Output High Current IOH -54 -45 MA
Rise/Fall Time Min
Between 0.4 V and 2.0 V
TRF(min) 0.4 ns 10pF Load
Rise/Fall Time Max
Between 0.4 V and 2.0 V
TRF(max) 1.6 ns 20pF Load
Duty Cycle Dt 45 55 % VT=1.5V
Skew TSK 250 ps VT=1.5V
Jitter Tsc-c 250 ps VT=1.5V
7.6 Electronical Characteristics of PCI Clock
Vdd=3.3V +/- 5%; CL=10-30pF
Parameter Symbol Min Typ Max Units Test Conditions
Ouput Impedance RDSP 15 55 Ohm
Ouput Impedance RDSN 15 55 Ohm
Output Low Voltage VOL 0.55 V IOL=1mA
Output High Voltage VOH 2.4 V IOH=-1mA
Output Low Current IOL 30 38 MA
Output High Current IOH -33 -33 MA
Rise/Fall Time Min
Between 0.4 V and 2.0 V
TRF(min) 0.5 ns 10pF Load
Rise/Fall Time Max
Between 0.4 V and 2.0 V
TRF(max) 2.0 ns 20pF Load
Duty Cycle Dt 45 55 % VT=1.5V
Skew TSK 500 ps VT=1.5V
Jitter Tsc-c 500 ps VT=1.5V
- 14 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
7.7 Electronical Characteristics of 48MHz, REF Clock
Vdd=3.3V +/- 5%; CL=10-20pF
Parameter Symbol Min Typ Max Units Test Conditions
Ouput Impedance RDSP 20 55 Ohm
Ouput Impedance RDSN 20 55 Ohm
Output Low Voltage VOL 0.4 V IOL=1mA
Output High Voltage VOH 2.4 V IOH=-1mA
Output Low Current IOL 29 27 MA
Output High Current IOH -29 -23 MA
RiseTime TR 1.8 4 ns 10pF Load
Fall Time TF 1.7 4 ns 20pF Load
Duty Cycle Dt 45 55 % VT=1.5V
Skew TSK 500 ps VT=1.5V
Jitter Tsc-c 1000 ps VT=1.5V
8.0 ORDERING INFORMATION
Part Number Package Type Production Flow
W83195AR-25 56 PIN SSOP Commercial, 0°C to +70°C
9.0 HOW TO READ THE TOP MARKING
W83195AR-25
28051234
814GAB
1st line: Winbond logo and the type number: W83195AR-25
2nd line: Tracking code 2 8051234
2: wafers manufactured in Winbond FAB 2
8051234: wafer production series lot number
3rd line: Tracking code 814 G A B
814: packages made in '98, week 14
G: assembly house ID; O means OSE, G means GR
A: Internal use code
B: IC revision
- 15 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
All the trade marks of products and companies mentioned in this data sheet belong to their
respective owners.
- 16 - Revision 1.0
W83195AR-25
Publication Release Date: Jan. 2000
10.0 PACKAGE DRAWING AND DIMENSIONS
0
0.008
0.400
0.292
7.52
0
7.42
8
7.59
10.31
b
E
D
c
18.2
9
10.16
A1
A2
A
10.41
18.54
18.42
2.79
2.34
8
0.2990.296
0.092
0.110
0.410
0.720 0.7300.725
0.406
MIN.
DIMENSION IN INCH
SYMBOL
DIMENSION IN MM
MIN. NOM MAX. MAX.NOM
0.20
e
L
L1
Y
θ
0.008 0.0135
0.005 0.010
0.024 0.032
0.055
0.003
0.20 0.34
0.13 0.25
0.51 0.760.64 0.020 0.0300.025
0.61 0.81
1.40
0.08
HE
θ
θ
2.57 0.101
.045
.055
.035
.045
HE
0.40/0.50 DIA
TOP VIEW
END VIEW
SEE DETAIL "A"
PARTING LINE
SIDE VIEW
D
A1
A2 A
DETAIL"A"
0.095
0.012 0.016
0.088 0.090
0.010
0.040
2.41
0.30 0.41
2.24 2.29
0.25
1.02
Headquarters
No. 4, Creation Rd. III
Science-Based Industrial Park
Hsinchu, Taiwan
TEL: 886-35-770066
FAX: 886-35-789467
www: http://www.winbond.com.tw/
Taipei Office
11F, No. 115, Sec. 3, Min-Sheng East Rd.
Taipei, Taiwan
TEL: 886-2-7190505
FAX: 886-2-7197502
TLX: 16485 WINTPE
Winbond Electronics (H.K.) Ltd.
Rm. 803, World Trade Square, Tower II
123 Hoi Bun Rd., Kwun Tong
Kowloon, Hong Kong
TEL: 852-27516023-7
FAX: 852-27552064
Winbond Electronics
(North America) Corp.
2730 Orchard Parkway
San Jose, CA 95134 U.S.A.
TEL: 1-408-9436666
FAX: 1-408-9436668
Please note that all data and specifications are subject to change without notice. All the trade
marks of products and companies mentioned in this data sheet belong to their respective
owners.
These products are not designed for use in life support appliances, devices, or systems where
malfunction of these products can reasonably be expected to result in personal injury.
Winbond customers using or selling these products for use in such applications do so at their
own risk and agree to fully indemnify Winbond for any damages resulting from such improper
use or s\\\\\\\\
- 17 - Revision 1.0
