ES1A – ES1J 1 of 3 © 2002 Won-Top Electronics
ES1A – ES1J
1.0A SURFACE MOUNT SUPER FAST RECTIFIER
Features
! Glass Passivated Die Construction
! Ideally Suited for Automatic Assembly B
! Low Forward Voltage Drop, High Efficiency
! Surge Overload Rating to 30A Peak D
! Low Power Loss A
! Super-Fast Recovery Time F
! Plastic Case Material has UL Flammability
Classification Rating 94V-O C H G
E
Mechanical Data
! Case: Low Profile Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking: Type Number
! Weight: 0.064 grams (approx.)
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic Symbol ES1A ES1B ES1C ES1D ES1E ES1G ES1J Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 150 200 300 400 600 V
RMS Reverse Voltage VR(RMS) 35 70 105 140 210 280 420 V
Average Rectified Output Current @TL = 120°C IO1.0 A
Non-Repetiti ve P eak Forward Surge Current
8.3ms Si ngl e half sine-wave superimposed on
rated load (JEDE C Method) IFSM 30 A
Forward Voltage @IF = 1.0A VFM 0.95 1.25 1.7 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 100°C IRM 5.0
500 µA
Reverse Recovery Time (Note 1) trr 35 nS
Typical Junction Capac itance (Note 2) Cj10 pF
Typical Thermal Resistance (Not e 3) RJL 35 K/W
Operating and Storage Temperature Range Tj, TSTG -65 t o +150 °C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A,
2. Measured at 1.0 MHz and applied reverse volt age of 4.0 V DC.
3. Mounted on P.C. Board with 8.0mm2 land area.
WTE
POWER SEMICONDUCTOR S
SMA/DO-214AC
Dim Min Max
A2.50 2.90
B4.00 4.60
C1.40 1.60
D0.152 0.305
E4.80 5.28
F2.00 2.44
G0.051 0.203
H0.76 1.52
All Dimensions in mm
0.01
0.1
1.0
10
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
F
T = 25 C
Pulse width = 300 s
j°µ
10
20
30
0
1 10 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Peak Forward Surge Current
Pulse width
8.3 ms single half-sine-wave
(JEDEC method)
50V DC
Approx
50 NI (Non-inductive)Ω10 NIΩ
1.0
NI
ΩOscilloscope
(Note 1)
Pulse
Generator
(Note 2)
Device
Under
Test
trr
Settimebasefor5/10ns/cm
+0.5A
0A
-0.25A
-1.0A
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0M , 22pF.
2. Rise Time = 10ns max. Input Impedance = 50 .
Ω
Ω
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
(+)
(+)
(-)
(-)
1
10
100
1 10 100
C , CAPACITANCE (pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
T = 25 C
f = 1.0MHz
j°
0
0.25
0.50
0.75
1.00
02550
75 100 125 150 175
I , AVERAGE FWD RECTIFIED CURRENT (A)
(AV)
T,LEAD TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
L°
Singlephasehalfwave
ResistiveorInductiveload
ES1A -ES1D ES1E -ES1G
ES1J
ES1A – ES1J 2 of 3 © 2002 Won-Top Electronics
ES1A – ES1J 3 of 3 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No.!
!!
!Package Type Shipping Quantity
ES1A-T1 SMA 1800/Tape & Reel
ES1A-T3 SMA 7500/Tape & Reel
ES1B-T1 SMA 1800/Tape & Reel
ES1B-T3 SMA 7500/Tape & Reel
ES1C-T1 SMA 1800/Tape & Reel
ES1C-T3 SMA 7500/Tape & Reel
ES1D-T1 SMA 1800/Tape & Reel
ES1D-T3 SMA 7500/Tape & Reel
ES1E-T1 SMA 1800/Tape & Reel
ES1E-T3 SMA 7500/Tape & Reel
ES1G-T1 SMA 1800/Tape & Reel
ES1G-T3 SMA 7500/Tape & Reel
ES1J-T1 SMA 1800/Tape & Reel
ES1J-T3 SMA 7500/Tape & Reel
Products listed in bold are WTE Preferred devices.
!T1 suffix refers to a 7” reel. T3 suffix refers to a 13” reel.
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
RECOMMENDED FOOTPRINT
0.050 MIN
(1.27 MIN)
inches
(
mm
)
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu K ang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www. wont op.com
0.058 MIN
(1.47 MIN)
0.083 MAX
(2.11 MAX)
