ACSP-2630 Biased Coaxial Schottky Detector Features: * Contains hermetically sealed modules, internal RF matching, DC return, and RF bypass capacitor. * The video port is protected from static or transient charges. * Input impedance matching. * Models may be chosen for broadband RF performance of for optimized narrow bands Specifications: Parameter Specification Units Frequency Range (min) 1- 4 GHz Sensitivity (min) 2000 mV/mW Flatness vs. Frequency (max) 0.3 dB Typical TSS -53 dBm Nominal Video Capacitance 39 pF Notes: SCREENING: Maximum input power: +20 dBm Internal Visual per MIL-STD-883, Method 2017 Sensitivity is measured into an open circuit load (>10k ohm). Temperature Cycle: -65C to +100C, 10 cycles VSWR is measured at or below -20 dBm input power level. Standard bias is 100 uA. OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534): Stabilization Bake per MIL-STD-883, Method 1008 Environmental Specifications: Temperature Cycle per MIL-STD-883, Method 1010 Designed to meet: MIL-E-5400, MIL-STD-202, MIL-E-16400 Constant Acceleration per MIL-STD-883, Method 2001 Operating Temp: -55C to +125C Burn-in per MIL-STD-883, Method 1015 Storage Temp: -65C to +150C Leak Test per MIL-STD-883, Method 1014 Humidity: MIL-STD-202F, M103, Cond B External Visual per MIL-STD-883, Method 2009 Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D SIGNAL & CONTROL SOLUTIONS Revision Date: 9/25/2013 40 Industrial Way East, Eatontown , NJ 07724 [USA] Phone: (732) 460-0212, Fax: (732) 460-0214 www.aeroflex.com/ascs, email: ascs-sales@aeroflex.com ACSP-2630 Biased Coaxial Schottky Detector SIGNAL & CONTROL SOLUTIONS Outline Drawing: SMA MALE (INPUT) SMA FEMALE (OUTPUT) 0.312 1.32.02 STANDARD CASE STYLE C3 (Optional Case Styles - C8, C15) Part Number Ordering Information: * * * * * Add desired polarity suffix: "N" for Negative, "P" for Positive (Ex: ACSP-2630N) Add "Z" for zero biased schottky option (Ex: ACSP-2630NZ) Add desired case style suffix: "C3" (Ex: ACSP-2630NZC3) Add "R" suffix: Reverse Connector Configuration (Ex: ACSP-2630NZC3R) (SMA Female Input/SMA Male Output) Add "-RC" suffix: RoHS-compliant (Ex: ACSP-2630NZC3R-RC) Notes (Continued): * * * * Video capacitance is used for RF bypass. This value can be changed if required for video response time. Contact the factory for more information. This part number is also available with a zero bias schottky diode. Due to higher impedance, the zero bias schottky will exhibit less sensitive TSS (typically a 3dB reduction) The temperature performance of the zero bias schottky is poor when operating at low input power levels. ISO 9001:2008 certified Aeroflex Signal & Control Solutions Aeroflex Microelectronic Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Fax: (732) 460-0214 Sales Phone: (732) 460-0212 ASCS-sales@aeroflex.com www.aeroflex.com/Microwave www.aeroflex.com/ASCS Aeroflex Signal & Control Solutions reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex Signal & Control Solutions. All rights reserved. Revision Date: 9/25/2013 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.