EB4 www.vishay.com Vishay Dale Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C, Standard and Right Angle Terminals FEATURES * Grid patterns: 0.100" C-C x 0.150" (2.54 mm x 3.81 mm) and 0.100" C-C x 0.200" (2.54 mm x 5.08 mm) * Standard and right angle terminals * Greater design latitude: body materials: glass-filled polyester and glass-filled polyphenylene sulfide 7 contact termination styles - 3 standard, 4 right angle 20 body sizes and 6 mounting styles * Selective gold plating * Accepts PC board thickness of 0.054" to 0.071" (1.37 mm to 1.80 mm) * Polarization between contact positions in all sizes. Between contact polarization permits polarizing without loss of contact position ELECTRICAL SPECIFICATIONS Current Rating: 3 A Test Voltage Between Contacts: at sea level: 650 VRMS At 70 000 feet (21 336 meters): 275 VRMS Insulation Resistance: 5000 M minimum at 500 VDC potential Contact Resistance: 30 mV maximum at rated current (with gold plating) Operating Temperature: -65 C to +125 C Humidity: 96 h at 90 % relative humidity at +40 C, dried at room temperature for 3 h minimum, insulation resistance was greater than 5000 M Durability: after 500 cycles of insertion and withdrawal of a 0.070" (1.78 mm) thick steel test board, contact resistance less than 0.030 V at 3 A on gold plated contacts and individual contact pair separation force when measured with a 0.054" (1.37 mm) thick steel test blade was greater than 1/2 oz. Shock: three 50G shocks in each of 3 mutually perpendicular planes with no loss of continuity Vibration: 2 h in each of 3 mutually perpendicular planes, frequency sweep 10 cps to 55 cps at 0.06 double amplitude with no loss of continuity APPLICATIONS For use with 0.0625" (1.59 mm) printed circuit boards requiring an edgeboard type connector on 0.100" (2.54 mm) centers MATERIAL SPECIFICATIONS Body Material: "3" thermoplastic polyester, glass-filled, black, flame retardant (UL 94 V-0) "5" thermoplastic polyphenylene sulfied, glass filled, brown, flame retardant (UL 94 V-0) Contacts: phosphor bronze (see Ordering Information) Polarizing Key: glass reinforced nylon, flame retardant (UL 94H-B) Plating: gold (see Ordering Information) ORDERING INFORMATION EB4 3 K 20 SG X 15 MODEL BODY MATERIAL STANDARD TERMINAL VARIATIONS CONTACTS PER SIDE CONTACT PLATING MOUNTING VARIATIONS POLARIZING KEY POSITIONS 3 = glass-filled polyester 5 = glass-filled polyphenylene sulfide Revision: 16-Feb-09 C, D, K, 1R, 2R, 3R, 4R 6, 10, 12, 15, 18, 20, 22, 25, 28, 30, 31, 35, 36, 40, 43, 44, 48, 49, 50, 60, and 65 SG = selective gold plating (0.00003" (0.000762 mm) minimum thick) on contact area with gold flash on terminal. SGF = selective gold plating (0.000010" (0.000254 mm) minimum thick) on contact area with gold flash on terminal. All gold plating over 0.00005" (0.00127 mm) minimum nickel underplate. Contact factory for additional plating options Key(s) are located to right of position(s) designated. Use oddnumbered contact for ordering: -1, -3, -5, etc. Required only when polarizing keys are to be factory installed. Note: to order polarizing keys individually, specify model PK-4. Document Number: 36001 1 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EB4 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.060 (1.52) R Typ. 0.342 (8.69) Typ. 0.050 (1.27) Typ. 0.287 (7.29) A B C 0.100 (2.54) Typ. D E J J 0.060 (1.52) Typ. 0.054 - 0.071 (1.37 - 1.80) Card Thickness 0.125 (3.17) Point of Contact See table for contact and mounting variations 0.250 (6.35) Typ. Section J - J 0.180 (4.57) Typ. 0.430 (10.92) Typ. 0.610 (15.49) Typ. 0.300 (7.62) Depth of Insertion 0.365 (9.27) 0.150 (3.81) Polarizing Key: When ordering polarizing keys individually, 0.295 (7.49) specify by the Model Number: PK-4 between contacts. Hand insertion tool, TPK-4, provided upon request. 0.096 0.002 (2.44 0.051) 0.200 (5.08) # OF CONTACT POSITIONS PER SIDE 0.031 (0.787) A B C D E 6 1.435 (36.45) 1.175 (29.85) 0.700 (17.78) 0.860 (21.84) 0.750 (19.05) 10 1.835 (46.61) 1.575 (40.00) 1.100 (27.94) 1.260 (32.00) 1.150 (29.21) 12 2.035 (51.69) 1.775 (45.08) 1.300 (33.02) 1.460 (37.08) 1.350 (34.29) 15 2.335 (59.31) 2.075 (52.70) 1.600 (40.64) 1.760 (44.70) 1.650 (41.91) 18 2.635 (66.93) 2.375 (60.32) 1.900 (48.26) 2.060 (52.32) 1.950 (49.53) 20 2.835 (72.01) 2.575 (65.40) 2.100 (53.34) 2.260 (57.40) 2.150 (54.61) 22 3.035 (77.09) 2.775 (70.48) 2.300 (58.42) 2.460 (62.48) 2.350 (59.69) 25 3.335 (84.71) 3.075 (78.10) 2.600 (66.04) 2.760 (70.10) 2.650 (67.31) 28 3.635 (92.33) 3.375 (85.72) 2.900 (73.66) 3.060 (77.72) 2.950 (74.93) 30 3.835 (97.41) 3.575 (90.80) 3.100 (78.74) 3.260 (82.80) 3.150 (80.01) 31 3.935 (99.95) 3.675 (93.34) 3.200 (81.28) 3.360 (85.34) 3.250 (82.55) 35 4.335 (110.11) 4.075 (103.50) 3.600 (91.44) 3.760 (95.50) 3.650 (92.71) 36 4.435 (112.65) 4.175 (106.04) 3.700 (93.98) 3.860 (98.04) 3.750 (95.25) 40 4.835 (122.81) 4.575 (116.20) 4.100 (104.14) 4.260 (108.20) 4.150 (105.41) 43 5.135 (130.43) 4.875 (123.82) 4.400 (111.76) 4.560 (115.82) 4.450 (113.03) 44 5.235 (132.97) 4.975 (126.36) 4.500 (114.30) 4.660 (118.36) 4.550 (115.57) 48 5.635 (143.13) 5.375 (136.52) 4.900 (124.46) 5.060 (128.52) 4.950 (125.73) 49 5.735 (145.67) 5.475 (139.06) 5.000 (127.00) 5.160 (131.06) 5.050 (128.27) 50 5.835 (148.21) 5.575 (141.60) 5.100 (129.54) 5.260 (133.60) 5.150 (130.81) 60 6.835 (173.61) 6.575 (167.00) 6.100 (154.94) 6.260 (159.00) 6.150 (156.21) 65 7.335 (186.31) 7.075 (179.70) 6.600 (167.64) 6.760 (171.70) 6.650 (168.91) Revision: 16-Feb-09 Document Number: 36001 2 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EB4 www.vishay.com Vishay Dale PHYSICAL SPECIFICATIONS Type "3R" - dip solder, 0.025" (0.635 mm) square terminals, 0.180" (4.57 mm) nominal terminal length x 0.150" (3.81 mm) nominal terminal row spacing Contact Type: bifurcated cantilever beam Number of Contacts: 10, 12, 15, 18, 20, 22, 25, 28, 30, 31, 35, 36, 40, 43, 44, 48, 49, 50, 60 and 65 per side Type "4R" - dip solder, 0.025" (0.635 mm) square terminals, 0.180" (4.57 mm) nominal terminal length x 0.200" (5.08 mm) nominal terminal row spacing Contact Terminal Variation: Standard terminals Type "C" - dip solder, 0.025" (0.635 mm) square terminals, 0.175" (4.44 mm) nominal terminal length below standoffs Contact Spacing: 0.100" (2.54 mm) center to center Type "D" - dip solder, 0.025" (0.635 mm) square terminals, 0.115" (2.92 mm) nominal terminal length below standoffs Contact Terminal Row Spacing: Standard - 0.200" (5.08 mm) nominal. Right angle - 0.200" (5.08 mm) nominal and 0.150" (3.81 mm) nominal Type "K" - Wire WrapTM, 0.025" (0.635 mm) square terminals, 0.570" (14.48 mm) nominal terminal length below standoffs Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm) Contact Terminal Variation: Right angle terminals Card Slot Depth: 0.300" (7.62 mm) Type "1R" - dip solder, 0.025" (0.635 mm) square terminals, 0.120" (3.05 mm) nominal terminal length x 0.150" (3.81 mm) nominal terminal row spacing Connector Polarization: between contact polarization key(s) are located to the right of the contact position(s) designated Type "2R" - dip solder, 0.025" (0.635 mm) square terminals, 0.120" (3.05 mm) nominal terminal length x 0.200" (5.08 mm) nominal terminal row spacing Note * High temperature burn-in, edgeboard connectors, with 0.100" (2.54 mm) center to center are on www.vishay.com/doc?36006 MOUNTING VARIATIONS in inches (millimeters) Type "X" Clearance Hole Raised Mounting Flange Type "XF" Clearance Hole Flush Mounting Flange 0.060 (1.52) Ref. Type "XFS" Right Angle Mounting Flange 0.060 (1.52) Ref. 0.060 (1.52) Ref. 0.060 (1.52) Ref. 0.125 (3.17) Dia. 0.125 (3.17) Dia. 0.430 (10.92) Type "XS" Right Angle Mounting Flange 0.125 (3.17) Dia. 0.250 (6.35) 0.610 (15.49) Ref. 0.125 (3.17) 0.430 (10.92) 0.250 (6.35) 0.610 (15.49) Ref. Type "Y" Threaded Insert Raised Mounting Flange 0.125 (3.17) Dia. 0.250 (6.35) 0.610 (15.49) Ref. 0.610 (15.49) Ref. Type "W" No Mounting Flange Type "YF" Threaded Insert Flush Mounting Flange 0.060 (1.52) Ref. 0.125 (3.17) 0.250 (6.35) 0.060 (1.52) Ref. 0.060 (1.52) Ref. 0.180 (4.57) 4-40 UNC-2B 0.250 (6.35) 0.430 (10.92) 4-40 UNC-2B 0.610 (15.49) Ref. 0.610 (15.49) Ref. 0.430 (10.92) 0.610 (15.49) Ref. 0.250 (6.35) TERMINAL VARIATIONS in inches (millimeters) Type "C" and "D" Solder Dip, Standard 0.025 (0.635) Square Terminals 0.200 (5.08) Type "K" Wire WrapTM, Standard 0.025 (0.635) Square Terminals 0.200 (5.08) To Fit 0.050 0.002 (1.27 0.051) Dia. Eyelet "C" = 0.175 (4.44) "D" = 0.115 (2.92) Revision: 16-Feb-09 Type "1R", "2R", "3R" and "4R" Right Angle 0.025 (0.635) Square Terminals A B 1R 0.150 0.120 0.030 (3.81) (3.05 0.762) 2R 0.200 0.120 0.030 (5.08) (3.05 0.762) 3R 0.150 0.180 0.030 (3.81) (4.57 0.762) 4R 0.200 0.180 0.030 (5.08) (4.57 0.762) B 0.590 (14.99) 0.570 (14.48) TYPE A Document Number: 36001 3 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: EB43-S1R2260X EB43-S0C1860W EB43-S4R2240X EB43-S1R1260X EB43-S0C304XF EB43-S0C3040W EB41S0K506XF EB43-S4R6060X EB42-S0E2560W EB43-S0C3140W EB43-S0E1040X EB43-S0E4040W EB43S0K356XF EB41-S0C2560W EB43-S1R3140W EB45-P0K1230X EB43-S1R256XS EB43-S0C104XF EB41S0C184XF EB43-S1R3160W EB43-S0C4060W EB45-P0K1830X EB43-S0E1540W EB43-S0K5060W EB45P0K4330X EB41-S0C4460W EB43-S4R186XS EB43-S1R1860W EB43-S3R1860X EB43-S4R5060W EB42S0E2540W EB43-S0K2540X EB45-P0E4330X EB45-P0E5030X EB43-S0K3640X EB43-S2R654XS EB41S0C2260W EB43-S0K1540W EB43-S0C3640W EB45-P0E4430X EB45-P3R28GXS EB41-S2R226XS EB43S3R066FS EB43-S0C3660X EB43-S0C5060W EB43-S0C5060X EB43-S0C1060W EB43-S2R154XF EB43S0K126YF EB45-P0K6030W EB45-P0K6030X EB45-P3R503XS EB41-S0K206XF EB43-S0C2560W EB43S0C256XF EB43-S0E124XF EB43-S0C306XF EB43-S4R4060W EB45-P0K2230X EB43-S0C284XF EB41S0C5060W EB43-S1R1060W EB43-S1R204FS EB43-S4R3140W EB43-S0C1560W EB43-S0C156XF EB43S0C2540W EB43-S1R3540X EB43-S3R1560W EB43-S1R1560W EB43-S2R1560W EB43-S2R2540W EB43S0C2860X EB43-S0C286XF EB41-S0K1060X EB43-S0C3160W EB41-S2R5060X EB41-S0C224XF EB41S0C2240W EB43-S0K106YF EB43-S0K106XF EB43-S0K4740X-102 EB43-S0E124 EB41-S0C2060X EB41S0C5060X EB43-S0C5040W EB43-S0K4740X-101