EB41-S2R5060X - Vishay / Dale

EB4

www.vishay.com Vishay Dale

Revision: 16-Feb-09 1Document Number: 36001

For technical questions, contact: connectors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,

Standard and Right Angle Terminals

ELECTRICAL SPECIFICATIONS

Current Rating: 3 A

Test Voltage Between Contacts:

at sea level: 650 VRMS

At 70 000 feet (21 336 meters): 275 VRMS

Insulation Resistance: 5000 M minimum at 500 VDC

potential

Contact Resistance: 30 mV maximum at rated current (with

gold plating)

Operating Temperature: -65 °C to +125 °C

Humidity: 96 h at 90 % relative humidity at +40 °C, dried at

room temperature for 3 h minimum, insulation resistance

was greater than 5000 M

Durability: after 500 cycles of insertion and withdrawal of a

0.070" (1.78 mm) thick steel test board, contact resistance

less than 0.030 V at 3 A on gold plated contacts and

individual contact pair separation force when measured with

a 0.054" (1.37 mm) thick steel test blade was greater than

½ oz.

Shock: three 50G shocks in each of 3 mutually

perpendicular planes with no loss of continuity

Vibration: 2 h in each of 3 mutually perpendicular planes,

frequency sweep 10 cps to 55 cps at 0.06 double amplitude

with no loss of continuity

FEATURES

• Grid patterns: 0.100" C-C x 0.150" (2.54 mm x 3.81 mm)

and 0.100" C-C x 0.200" (2.54 mm x 5.08 mm)

• Standard and right angle terminals

• Greater design latitude:

body materials: glass-filled polyester and glass-filled

polyphenylene sulfide

7 contact termination styles - 3 standard, 4 right angle

20 body sizes and 6 mounting styles

• Selective gold plating

• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm

to 1.80 mm)

• Polarization between contact positions in all sizes.

Between contact polarization permits polarizing without

loss of contact position

APPLICATIONS

For use with 0.0625" (1.59 mm) printed circuit boards

requiring an edgeboard type connector on 0.100" (2.54 mm)

centers

MATERIAL SPECIFICATIONS

Body Material:

“3” thermoplastic polyester, glass-filled, black, flame

retardant (UL 94 V-0)

”5” thermoplastic polyphenylene sulfied, glass filled, brown,

flame retardant (UL 94 V-0)

Contacts: phosphor bronze (see Ordering Information)

Polarizing Key: glass reinforced nylon, flame retardant

(UL 94H-B)

Plating: gold (see Ordering Information)

ORDERING INFORMATION

EB4 3 K 20 SG X 15

MODEL BODY

MATERIAL

3 = glass-filled

polyester

5 = glass-filled

polyphenylene

sulfide

STANDARD

TERMINAL

VARIATIONS

C, D, K,

1R, 2R,

3R, 4R

CONTACTS

PER SIDE

6, 10, 12,

15, 18, 20,

22, 25, 28,

30, 31, 35,

36, 40, 43,

44, 48, 49,

50, 60,

and 65

CONTACT PLATING

SG = selective gold plating (0.00003"

(0.000762 mm) minimum thick) on contact

area with gold flash on terminal.

SGF = selective gold plating (0.000010"

(0.000254 mm) minimum thick) on contact

area with gold flash on terminal.

All gold plating over 0.00005"

(0.00127 mm) minimum nickel underplate.

Contact factory for additional plating

options

MOUNTING

VARIATIONS

POLARIZING

KEY POSITIONS

Key(s) are located to

right of position(s)

designated. Use odd-

numbered contact for

ordering: -1, -3, -5, etc.

Required only when

polarizing keys are to be

factory installed.

Note: to order polarizing

keys individually, specify

model PK-4.

EB4

www.vishay.com Vishay Dale

Revision: 16-Feb-09 2Document Number: 36001

For technical questions, contact: connectors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in inches (millimeters)

Polarizing Key:

When ordering polarizing keys individually,

specify by the Model Number:

PK-4 between contacts. Hand insertion tool,

TPK-4, provided upon request.

# OF CONTACT

POSITIONS

PER SIDE

ABCDE

6 1.435 (36.45) 1.175 (29.85) 0.700 (17.78) 0.860 (21.84) 0.750 (19.05)

10 1.835 (46.61) 1.575 (40.00) 1.100 (27.94) 1.260 (32.00) 1.150 (29.21)

12 2.035 (51.69) 1.775 (45.08) 1.300 (33.02) 1.460 (37.08) 1.350 (34.29)

15 2.335 (59.31) 2.075 (52.70) 1.600 (40.64) 1.760 (44.70) 1.650 (41.91)

18 2.635 (66.93) 2.375 (60.32) 1.900 (48.26) 2.060 (52.32) 1.950 (49.53)

20 2.835 (72.01) 2.575 (65.40) 2.100 (53.34) 2.260 (57.40) 2.150 (54.61)

22 3.035 (77.09) 2.775 (70.48) 2.300 (58.42) 2.460 (62.48) 2.350 (59.69)

25 3.335 (84.71) 3.075 (78.10) 2.600 (66.04) 2.760 (70.10) 2.650 (67.31)

28 3.635 (92.33) 3.375 (85.72) 2.900 (73.66) 3.060 (77.72) 2.950 (74.93)

30 3.835 (97.41) 3.575 (90.80) 3.100 (78.74) 3.260 (82.80) 3.150 (80.01)

31 3.935 (99.95) 3.675 (93.34) 3.200 (81.28) 3.360 (85.34) 3.250 (82.55)

35 4.335 (110.11) 4.075 (103.50) 3.600 (91.44) 3.760 (95.50) 3.650 (92.71)

36 4.435 (112.65) 4.175 (106.04) 3.700 (93.98) 3.860 (98.04) 3.750 (95.25)

40 4.835 (122.81) 4.575 (116.20) 4.100 (104.14) 4.260 (108.20) 4.150 (105.41)

43 5.135 (130.43) 4.875 (123.82) 4.400 (111.76) 4.560 (115.82) 4.450 (113.03)

44 5.235 (132.97) 4.975 (126.36) 4.500 (114.30) 4.660 (118.36) 4.550 (115.57)

48 5.635 (143.13) 5.375 (136.52) 4.900 (124.46) 5.060 (128.52) 4.950 (125.73)

49 5.735 (145.67) 5.475 (139.06) 5.000 (127.00) 5.160 (131.06) 5.050 (128.27)

50 5.835 (148.21) 5.575 (141.60) 5.100 (129.54) 5.260 (133.60) 5.150 (130.81)

60 6.835 (173.61) 6.575 (167.00) 6.100 (154.94) 6.260 (159.00) 6.150 (156.21)

65 7.335 (186.31) 7.075 (179.70) 6.600 (167.64) 6.760 (171.70) 6.650 (168.91)

0.287

(7.29)

See table for

contact and

mounting variations

0.250

(6.35)

Typ.

0.430

(10.92)

Typ.

0.610 (15.49)

Typ.

0.180

(4.57)

Typ.

0.060

(1.52)

Typ.

0.050

(1.27)

Typ.

0.342

(8.69)

Typ.

0.365

(9.27)

0.060

(1.52)

R Typ.

0.100

(2.54)

Typ.

0.200

(5.08)

0.300 (7.62)

Depth of

Insertion

0.054 - 0.071 (1.37 - 1.80)

Card Thickness

Section J - J

0.125

(3.17)

Point of

Contact

0.031

(0.787)

0.295

(7.49)

0.150 (3.81)

0.096 ± 0.002

(2.44 ± 0.051)

EB4

www.vishay.com Vishay Dale

Revision: 16-Feb-09 3Document Number: 36001

For technical questions, contact: connectors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PHYSICAL SPECIFICATIONS

Contact Type: bifurcated cantilever beam

Number of Contacts: 10, 12, 15, 18, 20, 22, 25, 28, 30, 31,

35, 36, 40, 43, 44, 48, 49, 50, 60 and 65 per side

Contact Terminal Variation: Standard terminals

Type “C” - dip solder, 0.025" (0.635 mm) square terminals,

0.175" (4.44 mm) nominal terminal length below standoffs

Type “D” - dip solder, 0.025" (0.635 mm) square terminals,

0.115" (2.92 mm) nominal terminal length below standoffs

Type “K” - Wire Wrap™, 0.025" (0.635 mm) square

terminals, 0.570" (14.48 mm) nominal terminal length below

standoffs

Contact Terminal Variation: Right angle terminals

Type “1R” - dip solder, 0.025" (0.635 mm) square

terminals, 0.120" (3.05 mm) nominal terminal length x 0.150"

(3.81 mm) nominal terminal row spacing

Type “2R” - dip solder, 0.025" (0.635 mm) square

terminals, 0.120" (3.05 mm) nominal terminal length x 0.200"

(5.08 mm) nominal terminal row spacing

Type “3R” - dip solder, 0.025" (0.635 mm) square

terminals, 0.180" (4.57 mm) nominal terminal length x 0.150"

(3.81 mm) nominal terminal row spacing

Type “4R” - dip solder, 0.025" (0.635 mm) square

terminals, 0.180" (4.57 mm) nominal terminal length x 0.200"

(5.08 mm) nominal terminal row spacing

Contact Spacing: 0.100" (2.54 mm) center to center

Contact Terminal Row Spacing: Standard - 0.200"

(5.08 mm) nominal. Right angle - 0.200" (5.08 mm) nominal

and 0.150" (3.81 mm) nominal

Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)

Card Slot Depth: 0.300" (7.62 mm)

Connector Polarization: between contact polarization

key(s) are located to the right of the contact position(s)

designated

Note

• High temperature burn-in, edgeboard connectors, with 0.100"

(2.54 mm) center to center are on www.vishay.com/doc?36006

MOUNTING VARIATIONS in inches (millimeters)

TERMINAL VARIATIONS in inches (millimeters)

TYPE A B

1R 0.150

(3.81)

0.120 ± 0.030

(3.05 ± 0.762)

2R 0.200

(5.08)

0.120 ± 0.030

(3.05 ± 0.762)

3R 0.150

(3.81)

0.180 ± 0.030

(4.57 ± 0.762)

4R 0.200

(5.08)

0.180 ± 0.030

(4.57 ± 0.762)

Type “X”

Clearance Hole

Raised Mounting Flange

0.060 (1.52) Ref.

0.250

(6.35)

0.610

(15.49)

Ref.

0.430

(10.92)

0.125

(3.17)

Dia.

Type “XF”

Clearance Hole

Flush Mounting Flange

0.060 (1.52) Ref.

0.250

(6.35)

0.610

(15.49)

Ref.

0.125

(3.17)

Dia.

Type “XS”

Right Angle

Mounting Flange

0.060 (1.52) Ref.

0.610

(15.49)

Ref.

0.250

(6.35)

0.125

(3.17)

0.125

(3.17)

Dia.

0.430

(10.92)

Type “XFS”

Right Angle

Mounting Flange

0.060 (1.52) Ref.

0.125 (3.17)

0.125

(3.17)

Dia.

0.250 (6.35)

0.610

(15.49)

Ref.

Type “W”

No Mounting Flange

0.060 (1.52) Ref.

0.610

(15.49)

Ref.

0.430

(10.92)

0.180 (4.57)

Type “YF”

Threaded Insert

Flush Mounting Flange

0.060 (1.52) Ref.

0.250

(6.35)

0.610

(15.49)

Ref.

4-40

UNC-2B

Type “Y”

Threaded Insert

Raised Mounting Flange

0.060 (1.52) Ref.

0.250

(6.35)

0.610

(15.49)

Ref.

0.430

(10.92)

4-40

UNC-2B

0.570 (14.48)

0.200 (5.08)

Type “K”

Wire Wrap™, Standard

0.025 (0.635) Square Terminals

Type “C” and “D”

Solder Dip, Standard

0.025 (0.635) Square Terminals

0.200

(5.08)

“C” = 0.175 (4.44)

“D” = 0.115 (2.92)

To Fit

0.050 ± 0.002

(1.27 ± 0.051)

Dia. Eyelet

Type “1R”, “2R”, “3R” and “4R”

Right Angle

0.025 (0.635) Square Terminals

0.590

(14.99)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

EB43-S1R2260X EB43-S0C1860W EB43-S4R2240X EB43-S1R1260X EB43-S0C304XF EB43-S0C3040W EB41-

S0K506XF EB43-S4R6060X EB42-S0E2560W EB43-S0C3140W EB43-S0E1040X EB43-S0E4040W EB43-

S0K356XF EB41-S0C2560W EB43-S1R3140W EB45-P0K1230X EB43-S1R256XS EB43-S0C104XF EB41-

S0C184XF EB43-S1R3160W EB43-S0C4060W EB45-P0K1830X EB43-S0E1540W EB43-S0K5060W EB45-

P0K4330X EB41-S0C4460W EB43-S4R186XS EB43-S1R1860W EB43-S3R1860X EB43-S4R5060W EB42-

S0E2540W EB43-S0K2540X EB45-P0E4330X EB45-P0E5030X EB43-S0K3640X EB43-S2R654XS EB41-

S0C2260W EB43-S0K1540W EB43-S0C3640W EB45-P0E4430X EB45-P3R28GXS EB41-S2R226XS EB43-

S3R066FS EB43-S0C3660X EB43-S0C5060W EB43-S0C5060X EB43-S0C1060W EB43-S2R154XF EB43-

S0K126YF EB45-P0K6030W EB45-P0K6030X EB45-P3R503XS EB41-S0K206XF EB43-S0C2560W EB43-

S0C256XF EB43-S0E124XF EB43-S0C306XF EB43-S4R4060W EB45-P0K2230X EB43-S0C284XF EB41-

S0C5060W EB43-S1R1060W EB43-S1R204FS EB43-S4R3140W EB43-S0C1560W EB43-S0C156XF EB43-

S0C2540W EB43-S1R3540X EB43-S3R1560W EB43-S1R1560W EB43-S2R1560W EB43-S2R2540W EB43-

S0C2860X EB43-S0C286XF EB41-S0K1060X EB43-S0C3160W EB41-S2R5060X EB41-S0C224XF EB41-

S0C2240W EB43-S0K106YF EB43-S0K106XF EB43-S0K4740X-102 EB43-S0E124 EB41-S0C2060X EB41-

S0C5060X EB43-S0C5040W EB43-S0K4740X-101