SWCHT2000S07LF - Broadcom - Datasheet.Live

Features

n Compliant with AEC-Q200 Rev-C- Stress

Test Qualiﬁcation for Passive Components

in Automotive Applications

n Surface mount devices

n Fully compatible with current

industry standards

n Packaged per EIA 481-2 standard

n RoHS compliant* and halogen free**

n Agency recognition:

n Patents pending

MF-SM Series - PTC Resettable Fuses

* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is

1500 ppm or less.

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Electrical Characteristics

Model V max.

Volts

I max

Amps

Ihold Itrip Resistance Max. Time

To Trip

Tripped

Power

Dissipation

Amperes

at 23 °C

Ohms

at 23 °C

Amperes

at 23 °C

Seconds

at 23 °C

Watts

at 23 °C

Hold Trip R Min. R1 Max. Max. Typ.

MF-SM030 60 40 0.30 0.60 0.90 4.80 1.5 3.0 1.7

MF-SM050 60 40 0.50 1.00 0.35 1.40 2.5 4.0 1.7

MF-SM075 30 80 0.75 1.50 0.23 1.00 8.0 0.3 1.7

MF-SM075/60 60 10 0.75 1.50 0.23 1.00 8.0 0.3 1.7

MF-SM100 30 80 1.10 2.20 0.12 0.48 8.0 0.5 1.7

MF-SM100/33 33 40 1.10 2.20 0.12 0.41 8.0 0.5 1.7

MF-SM125 15 100 1.25 2.50 0.07 0.25 8.0 2.0 1.7

MF-SM150 15 100 1.50 3.00 0.06 0.25 8.0 5.0 1.9

MF-SM150/33 33 40 1.50 3.00 0.06 0.23 8.0 5.0 1.9

MF-SM185/33 33 40 1.80 3.60 0.04 0.15 8.0 5.0 1.9

MF-SM200 15 100 2.00 4.00 0.045 0.125 8.0 12.0 1.9

MF-SM250 15 100 2.50 5.00 0.024 0.085 8.0 25.0 1.9

MF-SM260 6 100 2.60 5.20 0.025 0.075 8.0 20.0 1.7

MF-SM300 6 100 3.00 6.00 0.015 0.048 8.0 35.0 1.5

*RoHS COMPLIANT

& AEC APPROVED

*RoHS COMPLIANT, **HALOGEN FREE

& AEC COMPLIANT

*RoHS and

AEC-Q200 COMPLIANT

LEAD FREE

*RoHS COMPLIANT

VERSIONS

AVAILABLE

LEAD FREE

VERSIONS ARE

RoHS COMPLIANT*

Environmental Characteristics

Operating Temperature ......................................... -40 °C to +85 °C

Maximum Device Surface Temperature

in Tripped State .................................................... 125 °C

Passive Aging ....................................................... +85 °C, 1000 hours ............................................... ±5 % typical resistance change

Humidity Aging...................................................... +85 °C, 85 % R.H. 7 days ..................................... ±5 % typical resistance change

Thermal Shock ..................................................... MIL-STD-202F, Method 107G ............................... ±10 % typical resistance change

.............................................................................. -40 °C to +85 °C, 20 cycles .................................. -20 % typical resistance change

Vibration ............................................................... MIL-STD-883C, Method 2007.1, ........................... Rmin ≤ R ≤ R1max

Condition A

Moisture Sensitivity Level (MSL) .......................... Level 1

ESD Classication - HBM ..................................... Class 6

Test Procedures And Requirements For Model MF-SM Series

Test Test Conditions Accept/Reject Criteria

Visual/Mech. .....................................................Verify dimensions and materials .......................Per MF physical description

Resistance ........................................................In still air @ 23 °C .............................................Rmin ≤ R ≤ R1max

Time to Trip .......................................................At specied current, Vmax, 23 °C ....................T ≤ max. time to trip (seconds)

Hold Current .....................................................30 min. at Ihold ................................................. No trip

Trip Cycle Life ...................................................Vmax, Imax, 100 cycles ...................................No arcing or burning

Trip Endurance .................................................Vmax, 48 hours ................................................No arcing or burning

Solderability ......................................................MIL-STD-202F, Method 208F ...........................95 % min. coverage

UL File Number ................................................E174545

http://www.ul.com/ Follow link to Online Certicates Directory, then enter UL File No.

E174545, or click here

TÜV Certicate .................................................Certicate Number Available on Request, or click here

MF-SM Series - PTC Resettable Fuses

Product Dimensions

Applications

Almost anywhere there is a low voltage power

supply and a load to be protected, including:

n Computers & peripherals

n General electronics

n Automotive applications

A B C D E F G H

Model

Min. Max. Max. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min.

MF-SM030 6.73 7.98 3.18 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.125) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

MF-SM050 6.73 7.98 3.18 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.125) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

MF-SM075 6.73 7.98 3.18 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.125) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

MF-SM075/60 6.73 7.98 3.18 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.125) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

MF-SM100 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

MF-SM100/33 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

MF-SM125 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

MF-SM150 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43

(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)

MF-SM150/33 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43

(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)

MF-SM185/33 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43

(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)

MF-SM200 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43

(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)

MF-SM250 8.00 9.50 3.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43

(0.315) (0.374) (0.118) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)

MF-SM260 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

MF-SM300 6.73 7.98 3.0 5.44 0.56 0.71 0.56 0.71 2.16 2.41 0.66 1.37 0.43

(0.265) (0.314) (0.118) (0.214) (0.022) (0.028) (0.022) (0.028) (0.085) (0.095) (0.026) (0.054) (0.017)

Packaging:

TAPE & REEL: MF-SM030, 050, 075, 075/60, 100, 100/33, 125, 260, 300 = 2000 pcs. per reel;

MF-SM150, 150/33, 185/33, 200, 250 = 1500 pcs. per reel.

End View

Side View

End View

Side View

DIMENSIONS: MM

(INCHES)

Terminal material:

Tin-plated brass

10.7 ± 0.1

(0.42 ± 0.004)

4.6 ± 0.1

(0.18 ± 0.004)

2.3 ± 0.1

(0.09 ± 0.004)

2.3 ± 0.1

(0.09 ± 0.004)

9.7 ± 0.1

(0.38 ± 0.004)

3.1 ± 0.1

(0.12 ± 0.004)

3.1 ± 0.1

(0.12 ± 0.004)

Recommended Pad Layout

MF-SM030, 050, 075, 075/60, 100, 100/33, 125, 260, 30

4.6 ± 0.1

(0.18 ± 0.004)

Recommended Pad Layout

MF-SM150, 150/33, 185/33, 200, 250

10.7 ± 0.1

(0.42 ± 0.004)

4.6 ± 0.1

(0.18 ± 0.004)

2.3 ± 0.1

(0.09 ± 0.004)

2.3 ± 0.1

(0.09 ± 0.004)

9.7 ± 0.1

(0.38 ± 0.004)

3.1 ± 0.1

(0.12 ± 0.004)

3.1 ± 0.1

(0.12 ± 0.004)

Recommended Pad Layout

MF-SM030, 050, 075, 075/60, 100, 100/33, 125, 260, 30

4.6 ± 0.1

(0.18 ± 0.004)

Recommended Pad Layout

MF-SM150, 150/33, 185/33, 200, 250

How to Order

MF - SM 100/33 - 2 - 99

Multifuse® Product

Designator

Series

SM = Surface Mount Component

Hold Current, Ihold/Vmax*

030 - 300 (0.3 - 3.0 Amps)

Packaging Options

- 2 = Tape and Reel**

Part Number Sufx Option

- 99 = RoHS Compliancy

As of date code April 1, 2005 all

MF-SM models are RoHS compliant.

The sufx “-99” can be used if a new

part number is required to reference

the RoHS compliance, but including

the “-99” sufx option is not

recommended for new designs.

* Vmax entry applies only to models

MF-SM075/60, MF-SM100/33, MF-SM150/33

& MF-SM185/33.

** Packaged per EIA-481-2

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

MF-SM Series - PTC Resettable Fuses

Typical Time to Trip at 23 °C

100

0.1

0.01

0.001

0.1 110 100

Fault Current (Amps)

Time to Trip (Seconds)

MF-SM200

MF-SM030

MF-SM050

MF-SM075, MF-SM075/60

MF-SM100, MF-SM100/33

MF-SM185/33

MF-SM125

MF-SM150, MF-SM150/33

MF-SM250

MF-SM300

MF-SM260

Typical Part Marking

Represents total content. Layout may vary.

MANUFACTURER'S

TRADEMARK

PART IDENTIFICATION

030

7A DATE CODE -

WEEK 1 OF 2017 = 7A

(YEAR & WEEK)

WEEK 27 OF 2017 = A7

(WEEK & YEAR)

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Thermal Derating Chart - Ihold (Amps)

Model Ambient Operating Temperature

-40 ºC -20 ºC 0 ºC 23 ºC 40 ºC 50 ºC 60 ºC 70 ºC 85 ºC

MF-SM030 0.45 0.40 0.35 0.30 0.25 0.23 0.20 0.17 0.14

MF-SM050 0.76 0.67 0.59 0.50 0.42 0.38 0.33 0.29 0.23

MF-SM075 1.11 0.99 0.84 0.75 0.63 0.57 0.49 0.45 0.36

MF-SM075/60 1.11 0.99 0.84 0.75 0.63 0.57 0.49 0.45 0.36

MF-SM100 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50

MF-SM100/33 1.66 1.47 1.29 1.10 0.91 0.83 0.73 0.64 0.50

MF-SM125 1.89 1.68 1.46 1.25 1.04 0.94 0.83 0.73 0.56

MF-SM150 2.27 2.01 1.76 1.50 1.25 1.13 0.99 0.87 0.68

MF-SM150/33 2.27 2.01 1.76 1.50 1.25 1.13 0.99 0.87 0.68

MF-SM185/33 2.56 2.32 2.08 1.85 1.60 1.44 1.28 1.12 0.88

MF-SM200 3.02 2.68 2.34 2.00 1.66 1.50 1.32 1.16 0.90

MF-SM250 3.78 3.35 2.93 2.50 2.08 1.88 1.65 1.45 1.13

MF-SM260 3.64 3.25 2.91 2.60 2.26 2.08 1.95 1.74 1.48

MF-SM300 4.13 3.75 3.30 2.87 2.62 2.43 2.25 2.00 1.78

Itrip is approximately two times Ihold.

MF-SM Series - PTC Resettable Fuses

Solder Reow Recommendations

160–220

300

250

200

150

100

10–20

Temperature (ϒC)

120

Preheating Soldering Cooling

Time (seconds)

Solder reow

• Recommended reow methods: IR, vapor phase oven, hot air oven.

• Devices are not designed to be wave soldered to the bottom side of the

board.

• Gluing the devices is not recommended.

• Recommended maximum paste thickness is 0.25 mm (.010 inch).

• Devices can be cleaned using standard industry methods and solvents.

Note:

• If reow temperatures exceed the recommended prole, devices may not

meet the performance requirements.

Rework

• A device should not be reworked.

Storage Recommendations

The recommended long term storage conditions for Multifuse® Polymer PTC devices are 40 °C maximum and 70 % RH maximum. All devices should

remain in the original sealed packaging prior to use. Devices may not conform with data sheet specications if these storage recommendations are

exceeded. Devices stored in this manner have an indenite shelf life.

MF-SM SERIES, REV. V, 10/17

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

DIMENSIONS: MM

(INCHES)

MF-SM030, 050, 075, 100, 125, 260, 300; MF-SM150, 200, 250;

MF-SM075/60; MF-SM-100/33; MF-SM008/250 MF-SM-150/33, MF-SM-185/33;

Tape Dimensions per EIA-481-2 MF-SM013/250 per EIA 481-2

W max. 16.3 16.3

(0.642) (0.642)

P0 4.0 ± 0.1 4.0 ± 0.1

(0.157 ± 0.004) (0.157 ± 0.004)

P1 8.0 ± 0.1 12.0 ± 0.1

(0.315 ± 0.004) (0.472 ± 0.004)

P2 2.0 ± 0.1 2.0 ± 0.1

(0.079 ± 0.004) (0.079 ± 0.004)

A0 5.7 ± 0.1 6.9 ± 0.1

(0.224 ± 0.004) (0.272 ± 0.004)

B0 8.1 ± 0.1 9.6 ± 0.1

(0.319 ± 0.004) (0.378 ± 0.004)

B1 max. 12.1 12.1

(0.476) (0.476)

D0 1.5 + 0.1/-0.0 1.5 + 0.1/-0.0

(0.059 + 0.004/-0) (0.059 + 0.004/-0)

F 7.5 ± 0.1 7.5 ± 0.1

(0.295 + 0.004) (0.295 + 0.004)

E1 1.75 ± 0.1 1.75 ± 0.1

(0.069 ± 0.004) (0.069 ± 0.004)

E2 min. 14.25 14.25

(0.561) (0.561)

T max. 0.6 0.6

(0.024) (0.024)

T1 max. 0.1 0.1

(0.004) (0.004)

K0 3.4 ± 0.1 3.4 ± 0.1*

(0.134 ± 0.004) (0.134 ± 0.004)*

Leader min. 390 390

(15.35) (15.35)

Trailer min. 160 160

(6.30) (6.30)

Reel Dimensions

A max. 360 360

(14.17) (14.17)

N min. 50 50

(1.97) (1.97)

W1 16.4 + 2.0/ -0.0 16.4 + 2.0/ -0.0

(0.646 + 0.079/-0) (0.646 + 0.079/-0)

W2 max. 22.4 22.4

(0.882) (0.882)

* Model MF-SM013/250 = 3.8 ± 0.1

(0.150 ± 0.004)

MF-SM, MF-SM/33, MF-SM/60 & MF-SM/250 Series Tape and Reel Speciﬁcations

Specifications are subject to change without notice.

Users should verify actual device performance in their specific applications.

The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

DIMENSIONS: MM

(INCHES)

N(HUB DIA.)

(MEASURED

AT HUB)

COVER

TAPE

T1A0

(MEASURED

AT HUB)

D0P2

NOTE: Effective December 1, 2010 (product date code V0), the cover tape was changed to the new 3M™ Universal Cover Tape (UCT).

3312 - 2 mm SMD Trimming Potentiometer

Application Notice

MFAN 12/18

Speciﬁcations are subject to change without notice.

Users should verify actual device performance in their speciﬁc applications.

The products described herein and this document are subject to speciﬁc legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Bourns® Multifuse® PPTC Resettable Fuses

• Users are responsible for independent and adequate evaluation of Bourns® Multifuse® Polymer PTC devices in the user’s

application, including the PPTC device characteristics stated in the applicable data sheet.

• Polymer PTC devices must not be allowed to operate beyond their stated maximum ratings. Operation in excess of such

maximum ratings could result in damage to the PTC device and possibly lead to electrical arcing and/or re. Circuits with

inductance may generate a voltage above the rated voltage of the polymer PTC device and should be thoroughly evaluated

within the user’s application during the PTC selection and qualication process.

• Polymer PTC devices are intended to protect against adverse effects of temporary overcurrent or overtemperature

conditions up to rated limits and are not intended to serve as protective devices where overcurrent or overvoltage conditions

are expected to be repetitive or prolonged.

• In normal operation, polymer PTC devices experience thermal expansion under fault conditions. Thus, a polymer PTC

device must be protected against mechanical stress, and must be given adequate clearance within the user’s application to

accommodate such thermal expansion. Rigid potting materials or xed housings or coverings that do not provide adequate

clearance should be thoroughly examined and tested by the user, as they may result in the malfunction of polymer PTC

devices if the thermal expansion is inhibited.

• Exposure to lubricants, silicon-based oils, solvents, gels, electrolytes, acids, and other related or similar materials may

adversely affect the performance of polymer PTC devices.

• Aggressive solvents may adversely affect the performance of polymer PTC devices. Conformal coating, encapsulating,

potting, molding, and sealing materials may contain aggressive solvents including but not limited to xylene and toluene,

which are known to cause adverse effects on the performance of polymer PTCs. Such aggressive solvents must be

thoroughly cured or baked to ensure their complete removal from polymer PTCs to minimize the possible adverse effect

on the device.

• Recommended storage conditions should be followed at all times. Such conditions can be found on the applicable data

sheet and on the Multifuse® Polymer PTC Moisture/Reow Sensitivity Classication (MSL) note:

https://www.bourns.com/docs/RoHS-MSL/msl_mf.pdf

Legal Disclaimer Notice

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and

its aliates (collectively, “Bourns”).

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change

without notice. Users should check for and obtain the latest relevant information and verify that such information is current

and complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and

statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical

requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary

from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components

in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®

product also can and do vary in dierent applications and actual performance may vary over time. Users should always verify

the actual performance of the Bourns® product in their specic devices and applications, and make their own independent

judgments regarding the amount of additional test margin to design into their device or application to compensate for

dierences between laboratory and real world conditions.

Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry

standard (e.g., ISO/TS 16949) or a particular qualication (e.g., UL listed or recognized), Bourns is not responsible for any

failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualication. Users

of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to

their devices or applications.

Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining

applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property

or environmental damage. Unless expressly and specically approved in writing by two authorized Bourns representatives

on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at

the user’s sole risk. Life-critical applications include devices identied by the U.S. Food and Drug Administration as Class III

devices and generally equivalent classications outside of the United States.

Bourns expressly identies those Bourns® standard products that are suitable for use in automotive applications on such

products’ data sheets in the section entitled “Applications.” Unless expressly and specically approved in writing by two

authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive

application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns

expressly identies a sub-category of automotive application in the data sheet for its standard products (such as infotainment

or lighting), such identication means that Bourns has reviewed its standard product and has determined that if such Bourns®

standard product is considered for potential use in automotive applications, it should only be used in such sub-category of

automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard

or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.

Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally

or any other generally equivalent governmental organization standard applicable to products designed or manufactured for

use in aircraft or space applications. Bourns expressly identies Bourns® standard products that are suitable for use in aircraft

or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specically

approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard

product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at

the user’s sole risk.

The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns

and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns

and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall

also apply to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the

design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use

Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions

apply to all uses and applications that violate national or international prohibitions, including embargos or international

regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be

exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without

prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible

to receive U.S. commodities, software, and technical data.

To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,

incidental or indirect damages or lost revenues or lost prots, and (ii) any and all implied warranties, including implied warranties

of tness for particular purpose, non-infringement and merchantability.

For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplied Chinese

bilingual versions are available at:

Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies

PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf

C1753 05/17/18R