1
CSM_E3T_DS_E_14_1
Photoelectric Sensor with Built-in Amplifier (Ultracompact and Thin Type)
E3T
Features
E3T-SR4@: Retro-reflective Sensor with Enhanced
Compactness and High Performance
Perform detection from a small hole.
With a coaxial optical system, the lens diameter is only 2 mm.
Sufficient incident light is obtained even through a small hole.
The Coaxial Retro-reflective Sensor can be used for reliable application with positioning.
Improved Stability of Short-distance Detection
A detection distance as short as 10 mm can be used with a Tape Reflector.
Detection is stable through a hole whether the distance is 10 mm or 100 mm (except in combination with the
E39-R4).
E3T-FL1@/-FL2@: The Slimmest BGS (Background Suppression) Reflective Photoelectric
Sensors in the World
Ultra slim at 3.5 mm and
black/white error of only
15%.
For example, the E3T-
FL1@ can stably detect a
black object at 12 mm
without being affected by a
white background at
20 mm.
OMRON provides BGS
performance sharper than
the previous Convergent-
reflective Sensors.
Dramatic Improvement in Black/White Error
3.5mm
E3T-FL1
20mm
12mm
15mm
Not detected
Detected
Black
object White
background
Rated sensing distance
0
5
10
15
20
25
(mm)
White paper Black paper White paper Black paper
E3T-FL1
(BGS Reflective Model)
E3T-SL1
(Convergent-reflective Model)
Photoelectric Sensor with Built-in
Amplifier Contributes to Equipment
Downsizing
Ultracompact and Thin Photoelectric Sensor with Built-in
Amplifier
Easy optical axis adjustment with emitter fluctuation of ±2% max.
for Through-beam Models.
Product lineup includes Coaxial Retro-reflective Models that
support positioning applications.
Product lineup includes BGS* Reflective Models unaffected by
background (E3T-FL1@/-FL2@).
Product lineup of models with a variety of connection
specifications.
(e.g., robot cable and Smartclick pre-wired connectors)
* BGS (Background Suppression) technology prevents detecting background objects.
Be sure to read Safety Precautions on
page 14.
E3T
2
Ordering Information
Sensors (Refer to Dimensions on page 15.)
*1. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver.
Orders for individual Emitters and Receivers are accepted. (Modifications are required for some models. Ask your OMRON representative for details.)
*2. M3 mounting models are also available. These models have the M-suffix. Example: E3T-ST11M 2M
Contact your OMRON representative for detail.
*3. Ask your OMRON representative about the previous Retro-reflective Sensors: E3T-SR2@ and E3T-SR3@.
*4. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*5. Models are available either with or without the E39-R37-CA Reflector included.
Model with E39-R37-CA Reflector: E3T-SR4@-S
Model without Reflector: E3T-SR4@-C
Sensing
method Appearance Connection
method
Sensing
distance
Operation
mode
Model
NPN output PNP output
Through-beam
(Emitter +
Receiver) *1
Side-view
Pre-wired (2 m)
Light-ON
E3T-ST11 2M *2 E3T-ST13 2M *2
Emitter E3T-ST11-L 2M
Receiver E3T-ST11-D 2M
Emitter E3T-ST13-L 2M
Receiver E3T-ST13-D 2M
Dark-ON
E3T-ST12 2M *2 E3T-ST14 2M *2
Emitter E3T-ST12-L 2M
Receiver E3T-ST12-D 2M
Emitter E3T-ST14-L 2M
Receiver E3T-ST14-D 2M
Light-ON
E3T-ST21 2M *2 E3T-ST23 2M *2
Emitter E3T-ST21-L 2M
Receiver E3T-ST21-D 2M
Emitter E3T-ST23-L 2M
Receiver E3T-ST23-D 2M
Dark-ON
E3T-ST22 2M *2 E3T-ST24 2M *2
Emitter E3T-ST22-L 2M
Receiver E3T-ST22-D 2M
Emitter E3T-ST24-L 2M
Receiver E3T-ST24-D 2M
Flat
Light-ON
E3T-FT11 2M E3T-FT13 2M
Emitter E3T-FT11-L 2M
Receiver E3T-FT11-D 2M
Emitter E3T-FT13-L 2M
Receiver E3T-FT13-D 2M
Dark-ON
E3T-FT12 2M E3T-FT14 2M
Emitter E3T-FT12-L 2M
Receiver E3T-FT12-D 2M
Emitter E3T-FT14-L 2M
Receiver E3T-FT14-D 2M
Light-ON
E3T-FT21 2M E3T-FT23 2M
Emitter E3T-FT21-L 2M
Receiver E3T-FT21-D 2M
Emitter E3T-FT23-L 2M
Receiver E3T-FT23-D 2M
Dark-ON
E3T-FT22 2M E3T-FT24 2M
Emitter E3T-FT22-L 2M
Receiver E3T-FT22-D 2M
Emitter E3T-FT24-L 2M
Receiver E3T-FT24-D 2M
Retro-
reflective *3
Side-view Light-ON E3T-SR41 2M *5 E3T-SR43 2M *5
Dark-ON E3T-SR42 2M *5 E3T-SR44 2M *5
Diffuse-
reflective
Flat Light-ON E3T-FD11 2M *2 E3T-FD13 2M *2
Dark-ON E3T-FD12 2M *2 E3T-FD14 2M *2
Convergent-
reflective
Side-view Light-ON E3T-SL11 2M *2 E3T-SL13 2M *2
Dark-ON E3T-SL12 2M *2 E3T-SL14 2M *2
Light-ON E3T-SL21 2M *2 E3T-SL23 2M *2
Dark-ON E3T-SL22 2M *2 E3T-SL24 2M *2
BGS
reflective
Flat Light-ON E3T-FL11 2M E3T-FL13 2M
Dark-ON E3T-FL12 2M E3T-FL14 2M
Light-ON E3T-FL21 2M E3T-FL23 2M
Dark-ON E3T-FL22 2M E3T-FL24 2M
Red li
g
ht
1 m
(Sensitivity Adjustment
Unit can be used.)
300 mm
500 mm
300 mm
Using the E39-R37-CA
100 mm [10 mm] *4
200 mm [30 mm] *4
Using the E39-R4 Reflector
provided
5 to 30 mm
5 to 15 mm
5 to 30 mm
1 to 15 mm
1 to 30 mm
E3T
3
Variety of Connection Specifications
The models with the connection specifications marked with a black circle in the table are available. The model number indication is a combination
of the basic model and the connection specification.
NPN Output
* The sensing distance depends on the Reflector that is used. The sensing distance is 200 mm if an E39-R4 is used and 100 mm if an E39-R37-CA is used.
PNP Output
Model
Model
number
example
E3T-ST11-M1TJ
0.3M E3T-ST11 5M E3T-ST11R 2M E3T-ST11-ECON
0.3M
E3T-ST11-ECON
2M
Sensing
method
Sensing
distance
Operation
mode
Connec-
tion speci-
fication
M12 pre-wired
Smartclick Con-
nector (cable
length: 0.3 m)
Pre-wired (cable
length: 5 m)
Pre-wired robot
(cable length: 2 m)
e-CON pre-wired
connector (cable
length: 0.3 m)
e-CON pre-wired
connector (cable
length: 2 m)
Basic
model
number
-M1TJ 0.3M 5M R 2M -ECON 0.3M -ECON 2M
Through-
beam (side-
view)
1 m Light-ON E3T-ST11 ●●●●●
Dark-ON E3T-ST12 ●●●●●
300 mm Light-ON E3T-ST21 ●●--- ●●
Dark-ON E3T-ST22 ●●--- ●●
Through-
beam (flat)
500 mm Light-ON E3T-FT11 ●●●●●
Dark-ON E3T-FT12 ●●●●●
300 mm Light-ON E3T-FT21 --- --- ●●
Dark-ON E3T-FT22 --- --- ●●
Retro-
reflective
200 mm
(100 mm)
Light-ON E3T-SR41 ●●●●●
Dark-ON E3T-SR42 ●●●●●
Diffuse-
reflective
5 to
30 mm
Light-ON E3T-FD11 ●●●●●
Dark-ON E3T-FD12 ●●●●●
Convergent-
reflective
5 to
15 mm
Light-ON E3T-SL11 ●●●●●
Dark-ON E3T-SL12 ●●●●●
5 to
30 mm
Light-ON E3T-SL21 ●●●●●
Dark-ON E3T-SL22 ●●●●●
BGS reflec-
tive
1 to
15 mm
Light-ON E3T-FL11 --- --- ---
Dark-ON E3T-FL12 --- --- ---
1 to
30 mm
Light-ON E3T-FL21 --- ●●---
Dark-ON E3T-FL22 --- --- ---
Example: E3T-ST11-M1TJ 0.3M
Connection
specification
Basic model
number
Model
Model
number
example
E3T-ST13-M1TJ
0.3M E3T-ST13 5M E3T-ST13R 2M
Sensing
method
Sensing
distance
Operation
mode
Connec-
tion speci-
fication
M12 pre-wired
Smartclick Con-
nector (cable
length: 0.3 m)
Pre-wired (cable
length: 5 m)
Pre-wired robot
(cable length: 2 m)
Basic
model
number
-M1TJ 0.3M 5M R 2M
Through-
beam (side-
view)
1 m Light-ON E3T-ST13 ●●●
Dark-ON E3T-ST14 ●●●
300 mm
Light-ON E3T-ST23 --- ---
Dark-ON E3T-ST24 --- ---
Through-
beam (flat)
500 mm Light-ON E3T-FT13 ●●●
Dark-ON E3T-FT14 ●●●
300 mm
Light-ON E3T-FT23 --- ---
Dark-ON E3T-FT24 ●●
---
E3T
4
* The sensing distance depends on the Reflector that is used. The sensing distance is 200 mm if an E39-R4 is used and 100 mm if an E39-R37-CA is used.
Retro-
reflective
200 mm
(100 mm)
Light-ON E3T-SR43 ●●●
Dark-ON E3T-SR44 ●●●
Diffuse-
reflective
5 to
30 mm
Light-ON E3T-FD13 ●●●
Dark-ON E3T-FD14 ●●●
Convergent-
reflective
5 to
15 mm
Light-ON E3T-SL13 ●●●
Dark-ON E3T-SL14 ●●●
5 to
30 mm
Light-ON E3T-SL23 ●●●
Dark-ON E3T-SL24 ●●●
BGS reflec-
tive
1 to
15 mm
Light-ON E3T-FL13 ---
Dark-ON E3T-FL14 ---
1 to
30 mm
Light-ON E3T-FL23 ---
Dark-ON E3T-FL24 ---
Model
Model
number
example
E3T-ST13-M1TJ
0.3M E3T-ST13 5M E3T-ST13R 2M
Sensing
method
Sensing
distance
Operation
mode
Connec-
tion speci-
fication
M12 pre-wired
Smartclick Con-
nector (cable
length: 0.3 m)
Pre-wired (cable
length: 5 m)
Pre-wired robot
(cable length: 2 m)
Basic
model
number
-M1TJ 0.3M 5M R 2M
E3T
5
Accessories (Order Separately)
Slits (A Slit is not provided with the Sensor for through-beam. Order a Slit separately if required.) (Refer to Dimensions on page 18.)
Reflectors
(Requirement for retro-reflective: A Retroreflector is provided depending on the model number. Check the model number in remarks column.)
(For Compact Reflectors, refer to Dimensions on page 17. For Tape Reflectors , refer to E39-L/F39-L/E39-S/E39-R.)
*1. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
*2. The E3T-SR4@ cannot be used with the E39-R37 or E39-RS1/2/3 (without CA) Tape Reflectors.
The E39-@-CA Reflector is for use only with the E3T-SR4@. It cannot be used with other Sensors.
Sensitivity Adjustment Unit
(A Unit is not provided with the Sensor (for the E3T-ST1@). Order
a Unit separately if required.
(Refer to Dimensions on page 18.)
Mounting Brackets
A Mounting Bracket is not provided with the Sensor. Order a
Mounting Bracket separately if required.
(Refer to Dimensions on page 18.)
Note: When using Through-beam models, order one bracket for the
Receiver and one for the Emitter.
Set of Mounting Screws A Set is provided with the Sensor.
Note: If a Through-beam Model is used, order two sets of Mounting Screws, one for the Emitter and one for the Receiver.
Used for mounting sensors. Order the set separately if it becomes lost or damaged.
These screws are not used for mounting brackets to the equipment.
Slit width Sensing distance
(typical) (Sensor model)
Minimum detectable
object (typical) Model Quantity Remarks
0.5-mm dia. 100 mm (E3T-ST1@)0.5-mm dia.
E39-S63
One each for Emitter and
Receiver; common with Slit
widths of 1 dia. and 0.5 dia.
(total of 2)
Plug-in type round slits
Can be used with E3T-ST@@
Through-beam Models.
30 mm (E3T-ST2@)
1-mm dia. 300 mm (E3T-ST1@)1-mm dia.
100 mm (E3T-ST2@)
0.5-mm dia. 50 mm (E3T-FT1@)0.5-mm dia.
E39-S64
Plug-in type round slits
Can be used with E3T-FT@@
Through-beam Models.
30 mm (E3T-FT2@)
1-mm dia. 100 mm (E3T-FT1@)1-mm dia.
50 mm (E3T-FT2@)
Name Recommended
Sensor Sensing distance Minimum
detectable object Model Quantity Remarks
Small
Reflectors
E3T-SR4@200 mm (30 mm) *1
2-mm dia.
E39-R4
1
Provided with the E3T-SR4@
E3T-SR4@-S 100 mm (10 mm) *1 E39-R37-CA *2 Provided with the E3T-SR4@-S
Tape
Reflectors E3T-SR4@-C 100 mm (10 mm) *1
E39-RS1-CA *2Use Tape Reflectors in combina-
tion with the E3T-SR4@-C, which
does not come with a Reflector.
E39-RS2-CA *2
E39-RS3-CA *2
Appearance
Sensing
distance
(typical)
Model Quantity Remarks
300 to
800 mm E39-E10 1
Can be used with
the E3T-ST1@
Through-beam
Models.
Appearance Model Quantity Remarks
E39-L116
1
Can be used with the
E3T-S@@@ Side-view
Models. (A securing nut
plate is provided with the
Mounting Bracket.)
E39-L117
E39-L118
E39-L119
Can be used with the
E3T-F@@@ Flat Models.
E39-L120
Applicable sensors Model Description Material Quantity Remarks
Side-view models
E3T-S@@@ E39-L164
Phillips screws (M2 × 14)
Hexagonal nuts (M2)
Spring washers (M2)
Flat washers (M2)
Iron, zinc plating
Iron, zinc plating
Iron, nickel plating
Iron, zinc plating 2 for each
Provided with the
side-view models
E3T-S@@@.
Flat models
E3T-F@@@ E39-L165
Phillips screws (M2 × 8)
Hexagonal nuts (M2)
Spring washers (M2)
Flat washers (M2)
Iron, zinc plating
Iron, zinc plating
Iron, nickel plating
Iron, zinc plating
Provided with the flat
models E3T-F@@@.
E3T
6
Sensor I/O Connectors
(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)
(For M12, refer to XS5. For e-CON, contact your OMRON representative.)
Note: When using Through-beam models, order one connector for the Receiver and one for the Emitter.
Ratings and Specifications
* Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Size Cable Appearance Cable type Model
M12
(For -M1TJ
models)
Standard
2 m
4-wire
XS5F-D421-D80-A
5 m XS5F-D421-G80-A
e-CON Standard cable
2 m
4-wire
E39-ECON2M
5 m E39-ECON5M
0.5 to 1 m E39-ECONW@M
1.1 to 1.5 m Replace @ with the cable length in
0.1-m increments.
1.6 to 2 m
Sensing method
Through-beam Retro-reflective (without M.S.R.
function)
Side-view Flat Side-view
NPN PNP NPN PNP NPN PNP
E3T-ST11
E3T-ST12
E3T-ST21
E3T-ST22
E3T-ST13
E3T-ST14
E3T-ST23
E3T-ST24
E3T-FT11
E3T-FT12
E3T-FT21
E3T-FT22
E3T-FT13
E3T-FT14
E3T-FT23
E3T-FT24
E3T-SR41
E3T-SR42
E3T-SR43
E3T-SR44
Sensing distance E3T-ST1@1 m
E3T-ST2@300 mm
E3T-FT1@500 mm
E3T-FT2@300 mm
E3T-SR4@
200 mm (30 mm) (Using the E39-R4)
100 mm (10 mm) (Using the E39-R37-CA)
Standard sensing object Opaque, 2-mm dia. min. Opaque, 1.3-mm dia. min. Opaque, 27-mm dia. min.
Minimum detectable
object (typical) 2-mm dia opaque object 1.3-mm dia opaque object 2-mm dia.
(sensing distance of 100 mm)
Hysteresis (white paper) ---
Black/white error ---
Directional angle Emitter: 2° to 20°, Receiver: 2° to 70°Emitter: 3° to 25°, Receiver: 3° min. 2° to 20°
Light source (wavelength)
Red LED (“Pin-point” LED) λ = 650 nm
Power supply voltage
12 to 24 VDC ±10%, ripple (p-p) 10% max.
Current consumption
30 mA max. (Emitter 10 mA max., Receiver 20 mA max.) 20 mA max.
Control output
Load power supply voltage: 26.4 VDC max.
Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50 mA, 1 V max. for load current of less than 10 mA)
Open-collector output
Light ON: E3T-@@@1 and E3T-@@@3Dark ON: E3T-@@@2 and E3T-@@@4
Protection circuits Power supply and control output reverse polarity protection
Output short-circuit protection
Power supply and control output re-
verse polarity protection
Output short-circuit protection, Mutual
interference prevention
Response time Operate or reset: 1 ms max.
Ambient illumination
Incandescent lamp: 5,000 lx max., Sunlight: 10,000 lx max.
Ambient temperature range
Operating: 25 to 55°C Storage: 40 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85% Storage: 35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Vibration resistance
Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hrs each in X, Y, and Z directions
Shock resistance Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions
Degree of protection
IP67 (IEC60529)
Connection method Pre-wired (standard length: 2 m)
Weight Approx. 40 g Approx. 20 g
Materials
Case PBT (polybutylene terephthalate)
Display window
Denatured polyarylate
Lens Denatured polyarylate Methacrylic resin
Accessories Instruction manual, Installation Phillips screws (Side-view Models: M2 × 14, Flat Models: M2 × 8), Nuts, Spring
washers, Flat washers, E39-R4 (E3T-SR4@ only), E39-R37-CA (E3T-SR4@-S only)
Straight
1234
Connector on one end
1234
4
3
12
Connector on both ends
E3T
7
Sensing method
Diffuse-reflective Convergent-reflective BGS reflective
Flat Side-view Flat
NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP
E3T-FD11
E3T-FD12
E3T-FD13
E3T-FD14
E3T-SL11
E3T-SL12
E3T-SL13
E3T-SL14
E3T-SL21
E3T-SL22
E3T-SL23
E3T-SL24
E3T-FL11
E3T-FL12
E3T-FL13
E3T-FL14
E3T-FL21
E3T-FL22
E3T-FL23
E3T-FL24
Sensing distance
5 to 30 mm
(50 × 50 mm white
paper)
5 to 15 mm
(50 × 50 mm white
paper)
5 to 30 mm
(50 × 50 mm white
paper)
1 to 15mm
(50 × 50 mm white
paper)
1 to 30mm
(50 × 50 mm white
paper)
Standard sensing object ---
Minimum detectable
object (typical) 0.15-mm dia. (sensing distance of 10 mm) 0.15-mm dia non-glossy object
(sensing distance of 10 mm)
Hysteresis (white paper) 6 mm max. 2 mm max. 6 mm max. 0.5 mm max. 2 mm max.
Black/white error --- 15% max.
Directional angle ---
Light source (wavelength)
Red LED (“Pin-point” LED) λ = 650 nm
Power supply voltage
12 to 24 VDC ±10%, ripple (p-p) 10% max.
Current consumption
20 mA max.
Control output
Load power supply voltage: 26.4 VDC max.
Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50 mA, 1 V max. for load current of less than 10 mA)
Open-collector output
Light ON: E3T-@@@1 and E3T-@@@3Dark ON: E3T-@@@2 and E3T-@@@4
Protection circuits Power supply and control output reverse polarity protection
Output short-circuit protection, Mutual interference prevention
Response time Operate or reset: 1 ms max.
Ambient illumination
Incandescent lamp: 5,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature range
Operating: 25 to 55°C Storage: 40 to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85% Storage: 35% to 95% (with no condensation)
Insulation resistance
20 MΩ min. at 500 VDC
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min
Vibration resistance
Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 for 0.5 hrs each in X, Y, and Z directions
Shock resistance Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions
Degree of protection
IP67 (IEC60529)
Connection method Pre-wired (standard length: 2 m)
Weight Approx. 20 g
Materials
Case PBT (polybutylene terephthalate)
Display window
Denatured polyarylate
Lens Denatured polyarylate
Accessories Instruction manual, Installation Phillips screws (Side-view Models: M2 × 14, Flat Models: M2 × 8), Nuts, Spring
washers, Flat washers
E3T
8
Engineering Data (Typical)
Parallel Operating Range
Through-beam
E3T-ST1@ + E39-S63 Slit
(Order Separately)
(A Slit is mounted to the Emitter and Receiver.)
E3T-ST1@ + E39-S63 Slit
(Order Separately) (Enlarged graph)
(A Slit is mounted to the Emitter and Receiver.)
E3T-ST2@ + E39-S63 Slit
(A Slit is mounted to the Emitter and Receiver.)
E3T-FT1@ + E39-S64 Slit
(Order Separately)
(A Slit is mounted to the Emitter and Receiver.)
E3T-FT1@ + E39-S64 Slit
(Order Separately) (Enlarged graph)
(A Slit is mounted to the Emitter and Receiver.)
E3T-FT2@ + E39-S64 Slit
(A Slit is mounted to the Emitter and Receiver.)
Retro-reflective
E3T-SR4@
200
150
100
50
0
50
100
150
200
0.5-dia Slit
Distance X (m)
1-dia Slit
0.4 0.8 1.2 1.6 2.0
Distance Y (mm)
Without Slit
Y
X80
60
40
20
0
20
40
60
80
40 80 120 160 200
Distance Y (mm)
1-dia Slit 0.5-dia Slit
Distance X (mm)
Y
X
Y
X
20
15
10
5
0
5
10
15
20
25
25
200 400 800600
Without Slit
Distance X (mm)
Distance Y (mm)
1-dia Slit
0.5-dia Slit
200
150
100
50
0
50
100
150
200
0.4 0.6 0.8 1 1.2 1.40.2
1-dia Slit
Without Slit Distance X (m)
Y
X
Distance Y (mm)
0.5-dia Slit
80
60
40
20
0
20
40
60
80
40 80 120 160 200
Distance Y (mm)
0.5-dia Slit
1-dia Slit
Distance X (mm)
Y
X
Y
X
60
40
20
0
20
40
60
80
80
200 400 600
800
1-dia Slit
Distance X
(mm)
Distance Y (mm)
Without Slit
0.5-dia Slit
40
30
20
10
0
10
20
30
40
400100 200 300
E3T-SR4@+E39-R4
E3T-SR4@+E39-R37-CA
Y
X
Distance Y (mm)
Distance X (mm)
E3T
9
Operating Range
Diffuse-reflective Convergent-reflective
E3T-FD1@E3T-SL1@E3T-SL2@
BGS Reflective
E3T-FL1@E3T-FL2@
Inclination Detection Area Characteristic
Convergent-reflective
E3T-SL1@ (Top to Bottom) E3T-SL1@ (Right to Left) E3T-SL2@ (Top to Bottom)
Sensing object:
50 x 50 mm white paper
3
2
1
0
1
2
3
4
4
10 20 30 40
Y
X
Distance Y (mm)
Distance X
(mm)
15
10
5
0
5
10
15
51015202530
Y
X
Distance Y (mm)
Sensing object:
50 x 50 mm white paper
Distance X (mm
)
3
2
1
0
1
2
3
4
4
10 20 30 40
Distance Y (mm)
Sensing object:
50 x 50 mm white paper
Distance X (mm)
Y
X
4
3
2
1
0
1
2
3
4
5
5
268410121416
Sensing distance X (mm)
Distance Y (mm)
Sensing object:
50 x 50 mm white paper
Y
X
8
6
4
2
0
2
4
6
8
10
10
5152010 25 30 35
Sensing distance X (mm)
Distance Y (mm)
Sensing object:
50 x 50 mm white paper
Y
X
10
Distance (mm)
20
010010
Angle θ (°)
Glass
Stainless steel
Angle of
inclination
−θ
10
Distance (mm)
20
010010
Angle θ (°)
Glass
Stainless steel
Angle of
inclination
−θ
20
40
30
10
010010
Angle θ (°)
Glass
Stainless steel
Distance (mm)
Angle of
inclination
−θ
E3T
10
BGS Reflective
E3T-SL2@ (Right to Left) E3T-FL1@ (Top to Bottom) E3T-FL1@ (Right to Left)
E3T-FL2@ (Top to Bottom) E3T-FL2@ (Right to Left)
Excess Gain vs. Set Distance
Through-beam
E3T-ST1@E3T-FT1@E3T-ST2@
20
40
30
10
010010
Angle θ (°)
Glass
Stainless steel
Distance (mm)
Angle of
inclination
−θ
10
20
01
0
010
Glass
Stainless steel
Angle θ (°)
Distance (mm)
Angle of
inclination
White paper Center
line
−θ
10
20
01
0
010
Angle θ (°)
Distance (mm)
Angle of
inclination
White paper Center
line
−θ
Glass
Stainless steel
20
10
30
40
01
0
0
10
Angle θ (°)
Glass
Stainless steel
Distance (mm)
Angle of
inclination
White
paper Center
line
−θ
20
10
30
40
01
0
010
Glass
Stainless steel
Angle θ (°)
Angle of
inclination
White paper Center
line
−θ
Distance (mm)
100
50
30
10
5
3
1
0.5
0.3
0.1
40003000200010000
Excess gain ratio
Operating
level
Set distance (mm)
100
50
30
10
5
3
1
0.5
0.3
0.10 400 800 1200 1600 2000
Excess gain ratio
Operating
level
Set distance (mm)
14
12
10
8
6
4
2
0
1
12009006003000
Operating
level
Set distance (mm)
Excess gain ratio
E3T
11
Retro-reflective Diffuse-reflective
E3T-FT2@E3T-SR4@E3T-FD1@
Convergent-reflective
E3T-SL1@E3T-SL2@
Sensing Object Size vs. Sensing Distance
Convergent-reflective
Diffuse-reflective, Convergent-reflective
E3T-SL1@E3T-FD1@, E3T-SL2@
14
12
10
8
6
4
2
02000150010005000
1
Excess gain ratio
Operating
level
Set distance
(
mm
)
Set distance
(
mm
)
Excess gain ratio
Operating
level
100
50
30
10
5
3
1
0.5
0.3
0.1
3002001000
E3T-SR4@+E39-R37-CA
E3T-SR4@+E39-R4
100
50
30
10
5
3
1
0.5
0.3
0.10 10 20 30 40
Excess gain ratio
Operating
level
Black paper
White pape
r
Set distance (mm
)
0 5 10 15 20
1000
500
300
100
50
30
10
5
3
1
0.5
0.3
0.1
Excess gain ratio
Operating
level
Black paper
White paper
Set distance (mm)
100
50
30
10
5
3
1
0.5
0.3
0.10 10 20 30 40
Excess gain ratio
Operating
level
White paper
Black paper
Set distance
(
mm
)
2.0
1.6
1.2
0.8
0.4
0 5 10 15 20
Min. sensing object dia. (mm)
Set distance (mm)
0 5 10 15 20 25 30
10
8
6
4
2
E3T-FD1@
E3T-SL2@
Min. sensing object dia. (mm)
Sensing object: Pin-gauge, stainless steel
Set distance (mm)
E3T
12
Sensing Distance vs. Material
Convergent-reflective Diffuse-reflective
E3T-SL1@E3T-SL2@E3T-FD1@
BGS Reflective
E3T-FL1@E3T-FL2@
Sensing Distance Characteristics of Sensitivity Adjustment Unit
(when Completing Optical Axis Adjustment)
E3T-ST1@ + E39-E10 Sensitivity Adjustment Unit (Order Separately) for Emitter
25
20
15
10
5
0
Material
Sensing distance (mm)
White paper
Stainless
Plywood
Cardboard
Glass sheet
Black rubber
Black paper
50
40
30
20
10
0
Material
Sensing distance (mm)
White paper
Stainless
Plywood
Cardboard
Glass sheet
Black rubber
Black paper
70
60
50
40
30
20
10
0
Material
Sensing distance (mm)
White paper
Stainless
Plywood
Cardboard
Glass sheet
Black rubber
Black paper
20
15
10
5
0
Material
Sensing distance (mm)
White paper
Stainless
Plywood
Cardboard
Glass sheet
Black rubber
Black paper
40
30
20
10
0
Material
Sensing distance (mm)
White paper
Stainless
Plywood
Cardboard
Glass sheet
Black rubber
Black paper
Min. 1/3 1/2 2/3 Max.
Adjustment dial angle
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
Measurement pattern 2
Measurement pattern 1
Sensing distance (m)
E3T
13
I/O Circuit Diagrams
NPN Output
PNP Output
* Models numbers for Through-beam Sensors (E3T-@T@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3T-ST11-L 2M), the model number of the Receiver, by adding "-D" (example:
E3T-ST11-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
Plugs (Sensor I/O Connectors)
Model *Operation mode Timing charts Output circuit
E3T-@@@1Light-ON
E3T-@@@2Dark-ON
Light incident
Light interrupted
Operation indicator
(orange)
ON
OFF
Output
transistor
Load
(e.g., relay)
Operate
Reset
ON
OFF
(Between brown (1)
and black (4) leads)
4
3
1
0 V
ZD
Through-beam Receivers,
Retroreflective and Reflective Models
Operation
indicator
(orange)
Stability
indicator
(green)
Photo-
electric
Sensor
Main
Circuit
Brown
Black
Blue
(Control output)
12 to 24 VDC
Load
(relay)
50 mA
max.
Through-beam Emitters
Brown
1
3
Blue
12 to 24 VDC
Photo-
electric
Sensor
Main
Circuit
1
2
3
4
3
1
24
Connector Pin Arrangement
Note:Pin 2 is not used.
Pins 2 and 4 are not used
with Through-beam Emitters.
e-CONM12
Operation indicator
(orange)
ON
OFF
Output
transistor
Load
(e.g., relay)
Operate
Reset
ON
OFF
(Between brown (1)
and black (4) leads)
Light incident
Light interrupted
Model *Operation mode Timing charts Output circuit
E3T-@@@3Light-ON
E3T-@@@4Dark-ON
Operation indicator
(orange)
ON
OFF
Output
transistor
Load
(e.g., relay)
Operate
Reset
ON
OFF
(Between blue (3)
and black (4) leads)
Light incident
Light interrupted
1
3
4
1
3
ZD
Through-beam Receivers,
Retroreflective and Reflective Models
Through-beam Emitters
Operation
indicator
(orange)
Stability
indicator
(green)
Photo-
electric
Sensor
Main
Circuit
Photo-
electric
Sensor
Main
Circuit
Brown
Blue
12 to 24 VDC
50 mA
max.
Brown
Black
Blue
12 to 24 VD
Load
(relay)
0 V
(Control output)
1
2
3
4
3
1
24
Connector Pin Arrangemen
t
Note:Pin 2 is not used.
Pins 2 and 4 are not used
with Through-beam Emitters.
e-CONM12
Operation indicator
(orange)
ON
OFF
Output
transistor
Load
(e.g., relay)
Operate
Reset
ON
OFF
(Between blue (3)
and black (4) leads)
Light incident
Light interrupted
Pin arrangement
Note: Pin 2 is not used.
Classification Wire color Connector pin No. Application
DC
Brown1 Power supply (+V)
White 2 ---
Blue 3 Power supply (0 V)
Black 4 Output
1234
15.8
E39-ECON@M
1234
4
3
12
E39-ECONW@M
2
4
13
1
2
3
4
Brown
Blue
White
Black
Wire color
XS5F-D421-D80-A
XS5F-D421-G80-A
M12 Connector
e-CON connector
E3T
14
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons. Do not use it for such purpose.
Do not apply AC power to the E3T, otherwise the E3T
may rupture.
Do not use the product in atmospheres or environments that exceed
product ratings.
Wiring
The maximum power supply voltage is 24 VDC +10%. Before turning
the power ON, make sure that the power supply voltage is not more
than maximum voltage.
Load short-circuit protection
The E3T incorporates a load short-circuit protection function. If the
load short-circuits, the output of the E3T will be turned OFF. Then,
recheck the wiring and turn on the E3T again to reset the load short-
circuit protection function. The load short-circuit protection function
will work if there is a current flow that is 1.5 times larger than the rated
load current. When using a capacitance load, be sure that the inrush
current will not exceed 1.5 times larger than the rated current.
Mounting
When mounting the Sensor, never strike it with a heavy object, such
as a hammer. Doing so may reduce its watertight properties. Use M2
screws and flat or spring washers to secure the Sensor.
(Tightening torque: 0.15 N·m max.)
Mounting the Sensor on Moving Parts
Consider models that use break
resistant cables (e.g., Robotics Cables)
if the Sensor will be mounted on a
moving part, such as a robot hand. The
flexing resistance of Robotics Cable at
approximately 400 thousand times is far
superior to that of standard cable at
approximately 14 thousand times.
Cable Bending Rupture Test
(Tough Cable Breaking Test)
The cable is repeatedly bent with power
supplied to check the number of bends
until the current is turned OFF.
Adjusting
Indicators
The following graphs indicate the status of each operating level.
Be sure to use the E3T within the stable operating range.
Use of E39-E10 Sensitivity Adjustment Unit
(Dark-ON: E3T-ST12)
1. Mount the Unit on the Receiver.
2. Set the adjuster of the Sensitivity Adjustment Unit to Max.
(Before shipping: Max.)
3. After mounting on the Sensor, adjust the optical axis and secure the
Sensor.
4. Place a workpiece between the Emitter and Receiver and gradually
turn the adjuster counterclockwise toward the Min. side. Stop
turning the adjuster when the operation indicator and stability
indicator (green) turn ON.
5. Remove the workpiece and confirm that the operation indicator is
OFF and the stability indicator (green) is ON. This completes the
adjustment.
Note: If the light attenuation rate due to a workpiece is 40% or less, the stability
indicator will not turn ON whether or not light is received. When the
variation of light is small such as when sensing semi-transparent
workpieces, carefully perform preliminary testing.
Others
Do not install the E3T in the following locations.
Locations subject to excessive dust or dirt
Locations subject to direct sunlight
Locations subject to corrosive gas
Locations subject to contact with organic solvents
Locations subject to vibration and shock
Locations subject to contact with water, oil, or chemicals
Locations subject to high humidities that might result in
condensation
WARNING
Precautions for Correct Use
Specimen Standard cable
2.4-mm dia.
(7/0.127-mm
dia.),
3 conductors
Robotics cable
2.4-mm dia.
(20/0.08-mm
dia.),
3 conductors
Test
Con-
tents/
condi-
tions
Bending angle (θ)90° each to the left and right
Bending speed 50 times/min
Load 200 g
Operation per
bend Once in 1 to 3 in the diagram
Curvature radius
of support point
(R)
5 mm
Result Approx. 14,000
times
Approx. 400,000
times
θθ
Weight
R
AC
B
Stable
operation
range*
Unstable
operation
range*
Stable
operation
range*
Operating
level x 1.2
Operating
level
Operating
level x 0.8
Light
ON
ON
ON
ON
OFF
OFF
OFF
Stability
indicator
(green)
Operation indicator (orange)
E3T-@@@1
E3T-@@@3
E3T-@@@2
E3T-@@@4
*If the E3T fs operating level is set to the stable operation range, the E3T
will be in most reliable operation without being influenced by temperature
change, voltage fluctuation, dust, or setting change. If the operating level
cannot be set to the stable operation range, pay attention to environmen-
tal changes while operating the E3T.
Indicator
Adjuster
(At Min) (At Center) (At Max.)
E3T
15
Dimensions
Sensors
* Models numbers for Through-beam Sensors (E3T-@T@@) are for sets that include both the Emitter and Receiver.
The model number of the Emitter is expressed by adding "-L" to the set model number (example: E3T-ST11-L 2M), the model number of the Receiver, by adding "-D" (example:
E3T-ST11-D 2M.) Refer to Ordering Information to confirm model numbers for Emitter and Receivers.
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
2-M2
9
±0.2
7
7.7
2.7
9
3.8
3.9
2.2
4.8
9.5
9.5
14.6
14.6
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
Two, 2.2 dia.
Emitter
(1.3 dia.)
Mounting Holes
Through-beam Models
(Side-view) *
E3T-ST1@ (Emitter)
E3T-ST2@ (Emitter)
Emitter: E3T-ST@@-L
Receiver: E3T-ST@@-D
M12 Smartclick Pre-wired Connector Model
(E3T-ST@@-M1TJ)
M12
4
3
1
2
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard length: 0.3 m
e-CON Pre-wired Connector Model
(E3T-ST@@-ECON)
1
15
2
3
4
5.9
15.6
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard lengths: 0.3 m and 2 m
Termi-
nal No.
Specifica-
tions
1+V
2 ---
30 V
4Output
(receiver only)
* Refer to Mounting the Sensor on
Moving Parts on page 14 for details on
Robotics Cable models.
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conduct or cross
sect ion: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
St andard length: 2 m
2-M2
9±0.2
7
7
7.7
2.7
9
3.8
3.9
2.2
4.8
9.5
9.5
Operation
Indicator
14.6
14.6
Two, 2.2 dia.
Receiver
(1.3 dia.)
Stability
indicator
2-M2
Mounting Holes
E3T-ST1@ (Receiver)
E3T-ST2@ (Receiver)
Emitter
(1.3 dia.)
3.5
3.5
1.75 1.75
4.4
8
12
12
14
3.2
8.6 15.8
15.8
2.4-dia. vinyl-insulated round cable
with 2 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
Two, 2.2 dia.
8
±0.2
Mounting Holes
2-M2
Through-beam Models (Flat) *
E3T-FT1@ (Emitter)
E3T-FT2@ (Emitter)
Emitter: E3T-FT@@-L
Receiver: E3T-FT@@-D
E3T-FT1@ (Receiver)
E3T-FT2@ (Receiver)
Operation Indicator
14
3.2
1.75
4.4
8
3.5
3.5
3.5
3.5
8.6 15.8
15.8
12
12
Lens
(1.3 dia.)
Two, 2.2 dia.
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
Stability indicator
8±0.2
Mounting Holes
2-M2
E3T
16
2-M2
9.2
15
4.5
3.8
3.9
6.3
11
11
15±0.2
Operation
Indicator
3.7
7
20.6
20.6
2-M2
Mounting Holes
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
Lens
(2.0 dia.)
Two, 2.2 dia.
Stability
indicator 1.75
Retro-reflective Models (Side-view)
E3T-SR4@
M12 Smartclick Pre-wired Connector Model
(E3T-SR@@-M1TJ/E3T-SL@@-M1TJ/
E3T-FD@@-M1TJ)
M12
4
3
1
2
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard length: 0.3 m
e-CON Pre-wired Connector
(E3T-SR@@-ECON/E3T-SL@@-ECON/
E3T-FD@@-ECON)
1
15
2
3
4
5.9
15.6
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard lengths: 0.3 m and 2 m
Terminal
No.
Specifi-
cations
1+V
2---
30 V
4 Output
* Refer to Mounting the Sensor on
Moving Parts on page 14 for details on
Robotics Cable models.
7
9.2
15
4
5
3.8
3.9
6.3
11
11
Operation
Indicator
3.7
20.6
20.6
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
Emitter lens
(1.5 dia.)
Receiver lens
(2.0 dia.)
Two, 2.2 dia.
Stability
indicator
15±0.2
2-M2
Mounting Holes
2-M2
Convergent-reflective Models (Side-view)
E3T-SL1@
E3T-SL2@
20.8
20.8
12
12
3.5
3.5
1.75
13.4
4.4
8
4
Operation
Indicator
19 20.8
3.2
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
Stability
indicator
Receiver
lens (2.0 dia.)
Two, 2.2 dia.
Emitter lens
(4.0 dia.)
8±0.2
Mounting Holes
2-M2
Diffuse-reflective Models (Flat)
E3T-FD1@
E3T
17
Accessories
12
12
3.5
3.5
1.75
19
3.2
4.4
8
6
7.4
Operation
Indicator
20.8
20.8
Receiver lens
(2.8 square)
Emitter lens
(1.5 dia.)
Two, 2.2 dia.
2.4-dia. vinyl-insulated round cable
with 3 conductors (Conductor cross
section: 0.1 mm² (AWG27),
Insulator diameter: 0.7 mm),
Standard length: 2 m
Stability
indicator
8
±0.2
M
ount
i
ng
H
o
l
es
2-M2
M12
4
3
1
2
2.4-dia. vinyl-insulated round cable
with 2 or 3 conductors
Standard length: 0.3 m
* Refer to Mounting the Sensor on Moving Parts on
page 14 for details on Robotics Cable models.
e-CON Pre-wired Connector
(E3T-FL@@-ECON)
Termi-
nal No.
Specifi-
cations
1+V
2---
30 V
4Output
1
15
2
3
4
5.9
15.6
2.4-dia. vinyl-insulated round cable
with 3 conductors
Standard lengths: 0.3 m and 2 m
BGS Models (Flat)
E3T-FL1@
E3T-FL2@M12 Smartclick Pre-wired Connector Model
(E3T-FL@@-M1TJ)
13.7
9.7
8.7
23 19 18
1.4
4.9
4
4
Two, 2.2 dia.
4.7
14
Reflector (Provided with E3T-SR4@)
E39-R4
Material, reflective surface: acrylic
Rear surface: ABS
10.2
8.7 (1.1)
13.7
13.7
18.323 18.3 23
Two, R1.55
Mounting bracket Reflector
Reflective
surface:
acrylic
Mounting
Bracket:
t 0.5
Reflector: t 0.5
(adhesive tape side)
Two, 3.1 dia.
Reflector (Provided with E3T-SR4@-S)
E39-R37-CA
Material: Mounting plate: stainless steel
(SUS301)
Reflective surface: acrylic Note: The reflective plate and mounting plate (1) come as a set.
E3T
18
Accessories (Order Separately)
Slit for E3T-ST@@ Through-beam Models
E39-S63
Slit for E3T-FT@@ Through-beam
Models
E39-S64
Sensitivity Adjustment Unit
(for E3T-ST1@ Through-beam Models)
E39-E10
2.7
2.7
Notch
12.6
9.7
1.0±0.05 dia.
7.4
0.5±0.05 dia.
Two, 2.2 dia.
With Slit Attachment
Note:Align the notch
direction of the Slit
when installing on the
Emitter and Receiver.
Material: 0.2-mm
thick stainless steel
(SUS301)
12.3
12
0.5 dia.
1 dia.
(4.1)
With Slit Attachment
Material: 0.1-mm-thick stainless steel
(SUS301)
2 dia.
Optical
axis Adjuster
90°
7.4
4
18.7
9.7
5.8
(10.1)
(15.1)
With Slit Attachment
Material: stainless steel (SUS301)
With Mounting Bracket (Example: E3T-ST11)
7.5
(17.8)
4.1
2-3.4
(Two, R2)
(Two, R2)
(Two, R1.1)
(Two, R1.2)
(Two, R1.7)
5
1.6
4
11
9.5
2.2
31.2
1.2 2.4
10
90°
R1.5 max.
(Four, R2) Three, M2
20.5 15
3
9
7
31
24.5
31.2
Two, M 2 × 14
9.7
(10.3
)
17.8
6.2
7.7
Mounting Brackets for Side-view Models
E39-L116
Material: 1.2-mm-thick stainless
steel (SUS304)
E3T
19
23
20.5 15
3
9
7
Two, M2 × 14
(10.3)
11.2
7.7
3.1
3.1
1811.5
11.2
3.4
4.5
2-R2(Two, R1.7)
(Two, R1.7)
90°
R1 max.
2.4
(23) 15
9
4
9
2-2.2
5
5
10
(11.2)
(Two, R1.1)
(Two, R2)
10.2
16.3
11.2
6.2
(Four, R2) Three, M2
1.2
With Mounting Bracket (Example: E3T-ST11)
Mounting Brackets for Side-view Models
E39-L117
Material: 1.2-mm-thick stainless
steel (SUS304)
20.5 15
3
9
7
7.7
90°
11.5
11.5
22.7
5
2.4
2-2.2
4
9
9
15
4.5
(Two, R1.7)
5
3.4 (Four, R2)
(Two, R1.1)
(23)
1811.5
23
16.3
Two, M2 × 14 13.2
(Four, R2) Three, M2
3.1
3.1
1.2
90°
With Mounting Bracket (Example: E3T-ST11)
Mounting Brackets for Side-view Models
E39-L118
Material: 1.2-mm-thick stainless
steel (SUS304)
E3T
20
1216
90°
8
Four, M2 tapped holes
97
3.2
2.4
8
2.4
15
10.5
10.6
973.5
Two, M2 × 8
With Mounting Bracket
(Example: E3T-FT11)
1.2
Mounting Brackets for Flat Models
E39-L119
Material: 1.2-mm-thick stainless
steel (SUS304)
1216
8
Four, M2 tapped holes
13.56
3.2
2.4
2.4
8
14
22.5
4.2
(5.4)
10.6
(6.4)
13.5
Two, M2 × 8
With Mounting Bracket
(Example: E3T-FT11)
1.2
Mounting Brackets for Flat Models
E39-L120
Material: 1.2-mm-thick stainless
steel (SUS304)
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2010.11
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2010 All Right Reserved.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
E39-G4 E39-RS5 E39-R14 E39-RS4 E39F9 E39-T3 E39-L60 E39-LU1 E39-L70 E39-ECON2M E39-ECON5M
E39-E8 E39-F10 E39-F1-31 E39-F1-33 E39-F14 E39-F15 E39-F2-32 E39-F32A E39-F32A5 E39-F32B E39-
F32B5 E39-F32C E39-F32C5 E39-F32D E39-F32D5 E39-F4 E39-F4-SD E39-F5 E39-G12 E39-G3 E39-L115
E39-L127-T1 E39-L127-T2 E39-L127-T3 E39-L135 E39-L136 E39-L150 E39-L151 E39-L153 E39-L3 E39-L31
E39-L34 E39-L35 E39-L37 E39-L39 E39-L41 E39-L42 E39-L43 E39-L71 E39-L85 E39-L86 E39-L87 E39-
L93FH E39-L93FV E39-L93XY E39-L94 E39-L96 E39-L97 E39-L98 E39-R1H-2 E39-RS2 E39-RSB-44 E39-S1
E39-S2 E39-S47 E39-S48 E39-S5 E39-S53 E39-S60 E39-S68 E39-TM1 E39-UF1-10 E39-Z12-2 E3T-FD11 5M
E3T-SL13-1 E3T-SL13-2 E3T-SL13-3 E3T-SL24R E3T-FL11 2M E3T-FL12 2M E3T-FL22 2M E3T-SR21 5M
E3T-SR21R 2M E3T-SR22 5M E3T-SR22R 2M E3T-SR23 5M E3T-SR23R 2M E3T-SR24 2M E3T-SR24 5M E3T-
SR24R 2M E3T-ST21 2M E39-R1-U1 E3T-SL11-U1 E3T-ST11-ECON 2M E3T-ST12-U1 E3T-ST12-M1TJ 0.3M
E39-ECON 5M E39-F9 E39-ECON 2M