PA73M/883 PA73M PA73M/883 Table 4 Group A Inspection SG PARAMETER SYMBOL TEMP. POWER 1 1 1 1 1 1 1 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS 25C 25C 25C 25C 25C 25C 25C 28V 28V 10V 30V 28V 28V 28V 3 3 3 3 3 3 3 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input BiasCurrent, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS -55C 55C - -55C -55C -55C -55C -55C 2 2 2 2 2 2 2 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, -IN Input Offset Current IQ VOS VOS VOS +IB -IB IOS 4 4 4 4 4 4 4 4 Output Voltage, IO = 5A Output Voltage, IO = 50mA Output Voltage, IO = 2A Current Limits Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection 6 6 6 6 6 6 6 5 5 5 5 5 5 5 TEST CONDITIONS MIN MAX UNITS VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 5 10 17.2 10.8 40 40 25 mA mV mV mV nA nA nA 28V 28V 10V 30V 28V 28V 28V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 5 15.2 22.4 16 72 72 60 mA mV mV mV nA nA nA 125C 125C 125C 125C 125C 125C 125C 28V 28V 10V 30V 28V 28V 28V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 7 16.5 23.7 17.3 80 80 80 mA mV mV mV nA nA nA VO VO VO ICL EN SR AOL CMR 25C 25C 25C 25C 25C 25C 25C 25C 18.3V 30V 30V 18V 28V 28V 28V 15V RL = 2.07 10.3 RL = 500 25 RL = 12 24 RL = 12, RCL = 1 .54 .86 RL = 500, AV = 1, CL = 10nF 1 RL = 500 1 10 RL = 500, F = 10Hz 91 RL = 500, F = DC, VCM = 9V 70 V V V A mV V/s dB dB Output Voltage, IO = 5A Output Voltage, IO = 50mA Output Voltage, IO = 2A Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR -55C -55C -55C -55C -55C -55C -55C 18.3V 30V 30V 30V 28V 28V 15V RL = 2.07 10.3 RL = 500 25 RL = 12 24 RL = 500, AV = 1, CL = 10nF 1 RL = 500 1 10 RL = 500, F = 10Hz 91 RL = 500, F = DC, VCM = 9V 70 V V V mV V/s dB dB Output Voltage, IO = 3A Output Voltage, IO = 50mA Output Voltage, IO = 2A Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO VO VO EN SR AOL CMR 125C 125C 125C 125C 125C 125C 125C 11.3V 30V 30V 28V 28V 28V 15V RL = 2.07 6.3 RL = 500 25 RL = 12 24 RL = 500, AV= 1, CL = 10nF 1 RL = 500 1 10 RL = 500, F = 10Hz 91 RL = 500, F = DC, VCM = 9V 70 V V V mV V/s dB dB 100K BURN IN CIRCUIT +15V 100K 5 * ** * 3 6 -15V www.apexanalog.com PA73MU These components are used to stabilize device due to poor high frequency characteristics of burn in board. ** Input signals are calculated to result in internal power dissipation of approximately 2.1W at case temperature = 125C. 2 1 U.U.T 4 * 1 8 20 1 Copyright (c) Apex Microtechnology, Inc. 2012 (All Rights Reserved) SEP 2012 1 PA73MU REVJ PA73M NEED TECHNICAL HELP? CONTACT APEX SUPPORT! For all Apex Microtechnology product questions and inquiries, call toll free 800-546-2739 in North America. For inquiries via email, please contact apex.support@apexanalog.com. International customers can also request support by contacting their local Apex Microtechnology Sales Representative. To find the one nearest to you, go to www.apexanalog.com IMPORTANT NOTICE Apex Microtechnology, Inc. has made every effort to insure the accuracy of the content contained in this document. However, the information is subject to change without notice and is provided "AS IS" without warranty of any kind (expressed or implied). Apex Microtechnology reserves the right to make changes without further notice to any specifications or products mentioned herein to improve reliability. This document is the property of Apex Microtechnology and by furnishing this information, Apex Microtechnology grants no license, expressed or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual property rights. Apex Microtechnology owns the copyrights associated with the information contained herein and gives consent for copies to be made of the information only for use within your organization with respect to Apex Microtechnology integrated circuits or other products of Apex Microtechnology. This consent does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale. APEX MICROTECHNOLOGY PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS USED FOR LIFE SUPPORT, AUTOMOTIVE SAFETY, SECURITY DEVICES, OR OTHER CRITICAL APPLICATIONS. PRODUCTS IN SUCH APPLICATIONS ARE UNDERSTOOD TO BE FULLY AT THE CUSTOMER OR THE CUSTOMER'S RISK. Apex Microtechnology, Apex and Apex Precision Power are trademarks of Apex Microtechnolgy, Inc. All other corporate names noted herein may be trademarks of their respective holders. 2 www.apexanalog.com Copyright (c) Apex Microtechnology, Inc. 2012 (All Rights Reserved) SEP 2012 PA73MU PA73MU REVJ