PA73M
PA73MU 1
PA73M/883
SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS
1 Quiescent Current IQ 25°C ±28V VIN = 0, AV = 100 5 mA
1 Input Offset Voltage VOS 25°C ±28V VIN = 0, AV = 100 ±10 mV
1 Input Offset Voltage VOS 25°C ±10V VIN = 0, AV = 100 ±17.2 mV
1 Input Offset Voltage VOS 25°C ±30V VIN = 0, AV = 100 ±10.8 mV
1 Input Bias Current, +IN +IB 25°C ±28V VIN = 0 ±40 nA
1 Input Bias Current, –IN –IB 25°C ±28V VIN = 0 ±40 nA
1 Input Offset Current IOS 25°C ±28V VIN = 0 ±25 nA
3 Quiescent Current IQ –55°C ±28V VIN = 0, AV = 100 5 mA
3 Input Offset Voltage VOS –55°C ±28V VIN = 0, AV = 100 ±15.2 mV
3 Input Offset Voltage VOS –55°C ±10V VIN = 0, AV = 100 ±22.4 mV
3 Input Offset Voltage VOS –55°C ±30V VIN = 0, AV = 100 ±16 mV
3 Input Bias Current, +IN +IB –55°C ±28V VIN = 0 ±72 nA
3 Input BiasCurrent, –IN –IB –55°C ±28V VIN = 0 ±72 nA
3 Input Offset Current IOS –55°C ±28V VIN = 0 ±60 nA
2 Quiescent Current IQ 125°C ±28V VIN = 0, AV = 100 7 mA
2 Input Offset Voltage VOS 125°C ±28V VIN = 0, AV = 100 ±16.5 mV
2 Input Offset Voltage VOS 125°C ±10V VIN = 0, AV = 100 ±23.7 mV
2 Input Offset Voltage VOS 125°C ±30V VIN = 0, AV = 100 ±17.3 mV
2 Input Bias Current, +IN +IB 125°C ±28V VIN = 0 ±80 nA
2 Input Bias Current, –IN –IB 125°C ±28V VIN = 0 ±80 nA
2 Input Offset Current IOS 125°C ±28V VIN = 0 ±80 nA
4 Output Voltage, IO = 5A VO 25°C ±18.3V RL = 2.07Ω 10.3 V
4 Output Voltage, IO = 50mA VO 25°C ±30V RL = 500Ω 25 V
4 Output Voltage, IO = 2A VO 25°C ±30V RL = 12Ω 24 V
4 Current Limits ICL 25°C ±18V RL = 12Ω, RCL = 1Ω .54 .86 A
4 Stability/Noise EN 25°C ±28V RL = 500Ω, AV = 1, CL = 10nF 1 mV
4 Slew Rate SR 25°C ±28V RL = 500Ω 1 10 V/µs
4 Open Loop Gain AOL 25°C ±28V RL = 500Ω, F = 10Hz 91 dB
4 Common Mode Rejection CMR 25°C ±15V RL = 500Ω, F = DC, VCM = ±9V 70 dB
6 Output Voltage, IO = 5A VO –55°C ±18.3V RL = 2.07Ω 10.3 V
6 Output Voltage, IO = 50mA VO –55°C ±30V RL = 500Ω 25 V
6 Output Voltage, IO = 2A VO –55°C ±30V RL = 12Ω 24 V
6 Stability/Noise EN –55°C ±30V RL = 500Ω, AV = 1, CL = 10nF 1 mV
6 Slew Rate SR –55°C ±28V RL = 500Ω 1 10 V/µs
6 Open Loop Gain AOL –55°C ±28V RL = 500Ω, F = 10Hz 91 dB
6 Common Mode Rejection CMR –55°C ±15V RL = 500Ω, F = DC, VCM = ±9V 70 dB
5 Output Voltage, IO = 3A VO 125°C ±11.3V RL = 2.07Ω 6.3 V
5 Output Voltage, IO = 50mA VO 125°C ±30V RL = 500Ω 25 V
5 Output Voltage, IO = 2A VO 125°C ±30V RL = 12Ω 24 V
5 Stability/Noise EN 125°C ±28V RL = 500Ω, AV= 1, CL = 10nF 1 mV
5 Slew Rate SR 125°C ±28V RL = 500Ω 1 10 V/µs
5 Open Loop Gain AOL 125°C ±28V RL = 500Ω, F = 10Hz 91 dB
5 Common Mode Rejection CMR 125°C ±15V RL = 500Ω, F = DC, VCM = ±9V 70 dB
BURN IN CIRCUIT
* These components are used to stabilize device
due to poor high frequency characteristics of burn
in board.
** Input signals are calculated to result in internal
power dissipation of approximately 2.1W at case
temperature = 125°C.
100KΩ
1Ω
1Ω
100KΩ
+15V
–15V
5
6
2
1
8
3
20Ω
** *
U.U.T
4
*
Table 4 Group A Inspection
PA73M/883
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA73MU REVJ
PA73M
2 PA73MU
NEED TECHNICAL HELP? CONTACT APEX SUPPORT!
For all Apex Microtechnology product questions and inquiries, call toll free 800-546-2739 in North America.
For inquiries via email, please contact apex.support@apexanalog.com.
International customers can also request support by contacting their local Apex Microtechnology Sales Representative.
To nd the one nearest to you, go to www.apexanalog.com
IMPORTANT NOTICE
Apex Microtechnology, Inc. has made every effort to insure the accuracy of the content contained in this document. However, the information is subject to change
without notice and is provided "AS IS" without warranty of any kind (expressed or implied). Apex Microtechnology reserves the right to make changes without further
notice to any specications or products mentioned herein to improve reliability. This document is the property of Apex Microtechnology and by furnishing this informa-
tion, Apex Microtechnology grants no license, expressed or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual
property rights. Apex Microtechnology owns the copyrights associated with the information contained herein and gives consent for copies to be made of the informa-
tion only for use within your organization with respect to Apex Microtechnology integrated circuits or other products of Apex Microtechnology. This consent does not
extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
APEX MICROTECHNOLOGY PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS USED FOR
LIFE SUPPORT, AUTOMOTIVE SAFETY, SECURITY DEVICES, OR OTHER CRITICAL APPLICATIONS. PRODUCTS IN SUCH APPLICATIONS ARE UNDER-
STOOD TO BE FULLY AT THE CUSTOMER OR THE CUSTOMER’S RISK.
Apex Microtechnology, Apex and Apex Precision Power are trademarks of Apex Microtechnolgy, Inc. All other corporate names noted herein may be trademarks
of their respective holders.
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA73MU REVJ