Hutton Close, Crowther Ind Est, Washington, Tyne & Wear NE38 0AH, England mailto:sales@isocom.uk.com - Tel: +44 (0)191 4166546 - Fax: +44 (0)191 4155055 Circuit Features Description Absolute Maximum Ratings Electrical Characteristics Similar Optocouplers Home Page IS41000, IS40600, IS40400 OPTICALLY COUPLED ISOLATOR Circuit Features 11000 V Isolation Peak 15 mm (min) Internal Separation 4 Pin Dual-In-Line Package Designed for VDE and British Standards Applications Description The IS41000 Series each consist of a Gallium Arsenide infrared emitting diode and a silicon photoDarlington housed in a plastic package. All electrical parameters are 100% tested. Specifications are guaranteed to a cumulative 0.65% AQL. Absolute Maximum Ratings (Ta=25C) Storage Temperature: Operating Temperature: Lead Soldering: Input-to-Output Isolation Voltage: -55C to +85C -55C to +85C 260C for 5s, 1.6mm from case 11000Vpeak Input Diode Forward DC Current: Reverse DC Voltage: Peak forward current: Power Dissipation: Derate Linearly: 60mA 4V 3A (1 p.w. 300pps) 100mW 1.67mW/C above 25C Output Transistor Collector-emitter voltage BVCEO: 30V Emitter-collector voltage BVECO: 7V Collector Current IC: 100mA Power Dissipation: 150mW Derate Linearly: 2.50mW/C above 25C Electro-optical Characteristics (Ta=25C) INPUT PARAMETER CONDITIONS MIN TYP MAX UNIT CI Capacitance f=1MHz, VO=0 VF Forward voltage IF=60mA 1.7 V IR Reverse current VR=3.0V 1 A VR Reverse Breakdown Voltage IR=10A 4 V BVCEO Collector-emitter Voltage IC=1mA, IF=0 30 V BVECO Emitter-collector Voltage IE=100A, IF=0 6 V lECO Collector-emitter Dark Current VCE=10V, IB=0 5 100 nA CCE Collector-emitter Capacitance VCE=5V, f=1MHz 5 pF IC/IF DC Current Transfer Ratio 30 pF OUTPUT IS41000 IF=10mA, VCE=10V 200 % IS40600 100 % IS40400 50 % COUPLED PARAMETER CONDITIONS MIN TYP MAX UNIT RIO Input-to-output Isolation Resistance VIO=500V, (note 1) 100 Gohm VCE(SAT) Collector-emitter Saturation Voltage IF=10mA, IC=0.5mA CIO Capacitance Input to Output f=1MHz (note 1) 0.5 pF TON Output Turn-on Time VCC=10V, IC=2mA 9 s TOFF Output Turn-off Time RL=100ohm 4 s 0.4 V TON Output Turn-on Time IF=10mA, VCC=5.0V 6.5 s TOFF Output Turn-off Time RL=10kohm 165 s Input-to-output Isolation Voltage (Note 1) 11000 Vpeak Notes 1. Measured with input leads shorted together and output leads shorted together. Isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. Visit File Lists to confirm old printouts are up-to-date. Contents