TZM-M-Series
www.vishay.com Vishay Semiconductors
Rev. 1.1, 22-Nov-12 1Document Number: 83393
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Small Signal Zener Diodes
FEATURES
Very sharp reverse characteristic
Low reverse current level
Very high stability
•Low noise
•TZMC - V
Z-tolerance ± 5 %
•TZMB - V
Z-tolerance ± 2 %
AEC-Q101 qualified
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATION
Voltage stabilization
PRIMARY CHARACTERISTICS
PARAMETER VALUE UNIT
VZ range nom. 2.4 to 75 V
Test current IZT 2.5; 5 mA
VZ specification Pulse current
Int. construction Single
ORDERING INFORMATION
DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY
TZM-M-series TZM-M-series-18 10 000 (8 mm tape on 13" reel) 10 000/box
TZM-M-series TZM-M-series-08 2500 (8 mm tape on 7" reel) 12 500/box
PACKAGE
PACKAGE NAME WEIGHT MOLDING COMPOUND
FLAMMABILITY RATING
MOISTURE SENSITIVITY
LEVEL
SOLDERING
CONDITIONS
MiniMELF SOD-80 31 mg UL 94 V-0 MSL level 1
(according J-STD-020) 260 °C/10 s at terminals
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Power dissipation RthJA 300K/W Ptot 500 mW
Zener current IZPtot/VZmA
Junction to ambient air On PC board 50 mm x 50 mm x 1.6 mm RthJA 500 K/W
Junction temperature Tj175 °C
Storage temperature range Tstg - 65 to + 175 °C
Forward voltage (max.) IF = 200 mA VF1.5 V
TZM-M-Series
www.vishay.com Vishay Semiconductors
Rev. 1.1, 22-Nov-12 2Document Number: 83393
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
Additional measurement of voltage group TZMC9V1-M to TZMC75-M, IR at 95 % VZmin. 35 nA at Tj = 25 °C
(1) at Tj = 150 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PART NUMBER
ZENER VOLTAGE
RANGE TEST CURRENT REVERSE LEAKAGE
CURRENT
DYNAMIC
RESISTANCE
TEMPERATURE
COEFFICIENT OF
ZENER VOLTAGE
VZ at IZT1 IZT1 IZT2 IR at VRIR (1) at VRZZ at IZT1 ZZK at IZT2 TKVZ
VmA μA VμA V%/K
MIN. NOM. MAX. TYP. TYP. MIN. MAX.
TZMC2V4-M 2.28 2.4 2.56 5 1 < 50 1 < 100 1 < 85 < 600 - 0.09 - 0.06
TZMC2V7-M 2.5 2.7 2.9 5 1 < 10 1 < 50 1 < 85 < 600 - 0.09 - 0.06
TZMC3V0-M 2.8 3.0 3.2 5 1 < 4 1 < 40 1 < 90 < 600 - 0.08 - 0.05
TZMC3V3-M 3.1 3.3 3.5 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05
TZMC3V6-M 3.4 3.6 3.8 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05
TZMC3V9-M 3.7 3.9 4.1 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05
TZMC4V3-M 4 4.3 4.6 5 1 < 1 1 < 20 1 < 90 < 600 - 0.06 - 0.03
TZMC4V7-M 4.4 4.7 5 5 1 < 0.5 1 < 10 1 < 80 < 600 - 0.05 0.02
TZMC5V1-M 4.8 5.1 5.4 5 1 < 0.1 1 < 2 1 < 60 < 550 - 0.02 0.02
TZMC5V6-M 5.2 5.6 6 5 1 < 0.1 1 < 2 1 < 40 < 450 - 0.05 0.05
TZMC6V2-M 5.8 6.2 6.6 5 1 < 0.1 2 < 2 2 < 10 < 200 0.03 0.06
TZMC6V8-M 6.4 6.8 7.2 5 1 < 0.1 3 < 2 3 < 8 < 150 0.03 0.07
TZMC7V5-M 7 7.5 7.9 5 1 < 0.1 5 < 2 5 < 7 < 50 0.03 0.07
TZMC8V2-M 7.7 8.2 8.7 5 1 < 0.1 6.2 < 2 6.2 < 7 < 50 0.03 0.08
TZMC9V1-M 8.5 9.1 9.6 5 1 < 0.1 6.8 < 2 6.8 < 10 < 50 0.03 0.09
TZMC10-M 9.4 10 10.6 5 1 < 0.1 7.5 < 2 7.5 < 15 < 70 0.03 0.1
TZMC11-M 10.4 11 11.6 5 1 < 0.1 8.2 < 2 8.2 < 20 < 70 0.03 0.11
TZMC12-M 11.4 12 12.7 5 1 < 0.1 9.1 < 2 9.1 < 20 < 90 0.03 0.11
TZMC13-M 12.4 13 14.1 5 1 < 0.1 10 < 2 10 < 26 < 110 0.03 0.11
TZMC15-M 13.8 15 15.6 5 1 < 0.1 11 < 2 11 < 30 < 110 0.03 0.11
TZMC16-M 15.3 16 17.1 5 1 < 0.1 12 < 2 12 < 40 < 170 0.03 0.11
TZMC18-M 16.8 18 19.1 5 1 < 0.1 13 < 2 13 < 50 < 170 0.03 0.11
TZMC20-M 18.8 20 21.2 5 1 < 0.1 15 < 2 15 < 55 < 220 0.03 0.11
TZMC22-M 20.8 22 23.3 5 1 < 0.1 16 < 2 16 < 55 < 220 0.04 0.12
TZMC24-M 22.8 24 25.6 5 1 < 0.1 18 < 2 18 < 80 < 220 0.04 0,12
TZMC27-M 25.1 27 28.9 5 1 < 0.1 20 < 2 20 < 80 < 220 0.04 0.12
TZMC30-M 28 30 32 5 1 < 0.1 22 < 2 22 < 80 < 220 0.04 0.12
TZMC33-M 31 33 35 5 1 < 0.1 24 < 2 24 < 80 < 220 0.04 0.12
TZMC36-M 34 36 38 5 1 < 0.1 27 < 2 27 < 80 < 220 0.04 0.12
TZMC39-M 37 39 41 2.5 0.5 < 0.1 30 < 5 30 < 90 < 500 0.04 0.12
TZMC43-M 40 43 46 2.5 0.5 < 0.1 33 < 5 33 < 90 < 600 0.04 0.12
TZMC47-M 44 47 50 2.5 0.5 < 0.1 36 < 5 36 < 110 < 700 0.04 0.12
TZMC51-M 48 51 54 2.5 0.5 < 0.1 39 < 10 39 < 125 < 700 0.04 0.12
TZMC56-M 52 56 60 2.5 0.5 < 0.1 43 < 10 43 < 135 < 1000 0.04 0.12
TZMC62-M 58 62 66 2.5 0.5 < 0.1 47 < 10 47 < 150 < 1000 0.04 0.12
TZMC68-M 64 68 72 2.5 0.5 < 0.1 51 < 10 51 < 200 < 1000 0.04 0.12
TZMC75-M 70 75 79 2.5 0.5 < 0.1 56 < 10 56 < 250 < 1500 0.04 0.12
TZM-M-Series
www.vishay.com Vishay Semiconductors
Rev. 1.1, 22-Nov-12 3Document Number: 83393
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
Additional measurement of voltage group TZMB9V1-M to TZMB75-M, IR at 95 % VZmin. 35 nA at Tj = 25 °C
(1) at Tj = 150 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PART NUMBER
ZENER VOLTAGE
RANGE TEST CURRENT REVERSE LEAKAGE
CURRENT
DYNAMIC
RESISTANCE
TEMPERATURE
COEFFICIENT OF
ZENER VOLTAGE
VZ at IZT1 IZT1 IZT2 IR at VRIR (1) at VRZZ at IZT1 ZZK at IZT2 TKVZ
VmA μA VμA V%/K
MIN. NOM. MAX. TYP. TYP. MIN. MAX.
TZMB2V4-M 2.35 2.4 2.45 5 1 < 50 1 < 100 1 < 85 < 600 - 0.09 - 0.06
TZMB2V7-M 2.64 2.7 2.76 5 1 < 10 1 < 50 1 < 85 < 600 - 0.09 - 0.06
TZMB3V0-M 2.94 3.0 3.06 5 1 < 4 1 < 40 1 < 90 < 600 - 0.08 - 0.05
TZMB3V3-M 3.24 3.3 3.36 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05
TZMB3V6-M 3.52 3.6 3.68 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05
TZMB3V9-M 3.82 3.9 3.98 5 1 < 2 1 < 40 1 < 90 < 600 - 0.08 - 0.05
TZMB4V3-M 4.22 4.3 4.38 5 1 < 1 1 < 20 1 < 90 < 600 - 0.06 - 0.03
TZMB4V7-M 4.6 4.7 4.8 5 1 < 0.5 1 < 10 1 < 80 < 600 - 0.05 0.02
TZMB5V1-M 5 5.1 5.2 5 1 < 0.1 1 < 2 1 < 60 < 550 - 0.02 0.02
TZMB5V6-M 5.48 5.6 5.72 5 1 < 0.1 1 < 2 1 < 40 < 450 - 0.05 0.05
TZMB6V2-M 6.08 6.2 6.32 5 1 < 0.1 2 < 2 2 < 10 < 200 0.03 0.06
TZMB6V8-M 6.66 6.8 6.94 5 1 < 0.1 3 < 2 3 < 8 < 150 0.03 0.07
TZMB7V5-M 7.35 7.5 7.65 5 1 < 0.1 5 < 2 5 < 7 < 50 0.03 0.07
TZMB8V2-M 8.04 8.2 8.36 5 1 < 0.1 6.2 < 2 6.2 < 7 < 50 0.03 0.08
TZMB9V1-M 8.92 9.1 9.28 5 1 < 0.1 6.8 < 2 6.8 < 10 < 50 0.03 0.09
TZMB10-M 9.8 10 10.2 5 1 < 0.1 7.5 < 2 7.5 < 15 < 70 0.03 0.1
TZMB11-M 10.78 11 11.22 5 1 < 0.1 8.2 < 2 8.2 < 20 < 70 0.03 0.11
TZMB12-M 11.76 12 12.24 5 1 < 0.1 9.1 < 2 9.1 < 20 < 90 0.03 0.11
TZMB13-M 12.74 13 13.26 5 1 < 0.1 10 < 2 10 < 26 < 110 0.03 0.11
TZMB15-M 14.7 15 15.3 5 1 < 0.1 11 < 2 11 < 30 < 110 0.03 0.11
TZMB16-M 15.7 16 16.3 5 1 < 0.1 12 < 2 12 < 40 < 170 0.03 0.11
TZMB18-M 17.64 18 18.36 5 1 < 0.1 13 < 2 13 < 50 < 170 0.03 0.11
TZMB20-M 19.6 20 20.4 5 1 < 0.1 15 < 2 15 < 55 < 220 0.03 0.11
TZMB22-M 21.55 22 22.45 5 1 < 0.1 16 < 2 16 < 55 < 220 0.04 0.12
TZMB24-M 23.5 24 24.5 5 1 < 0.1 18 < 2 18 < 80 < 220 0.04 0,12
TZMB27-M 26.4 27 27.6 5 1 < 0.1 20 < 2 20 < 80 < 220 0.04 0.12
TZMB30-M 29.4 30 30.6 5 1 < 0.1 22 < 2 22 < 80 < 220 0.04 0.12
TZMB33-M 32.4 33 33.6 5 1 < 0.1 24 < 2 24 < 80 < 220 0.04 0.12
TZMB36-M 35.3 36 36.7 5 1 < 0.1 27 < 2 27 < 80 < 220 0.04 0.12
TZMB39-M 38.2 39 39.8 2.5 1 < 0.1 30 < 5 30 < 90 < 500 0.04 0.12
TZMB43-M 42.1 43 43.9 2.5 0.5 < 0.1 33 < 5 33 < 90 < 600 0.04 0.12
TZMB47-M 46.1 47 47.9 2.5 0.5 < 0.1 36 < 5 36 < 110 < 700 0.04 0.12
TZMB51-M 50 51 52 2.5 0.5 < 0.1 39 < 10 39 < 125 < 700 0.04 0.12
TZMB56-M 54.9 56 57.1 2.5 0.5 < 0.1 43 < 10 43 < 135 < 1000 0.04 0.12
TZMB62-M 60.8 62 63.2 2.5 0.5 < 0.1 47 < 10 47 < 150 < 1000 0.04 0.12
TZMB68-M 66.6 68 69.4 2.5 0.5 < 0.1 51 < 10 51 < 200 < 1000 0.04 0.12
TZMB75-M 73.5 75 76.5 2.5 0.5 < 0.1 56 < 10 56 < 250 < 1500 0.04 0.12
TZM-M-Series
www.vishay.com Vishay Semiconductors
Rev. 1.1, 22-Nov-12 4Document Number: 83393
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Total Power Dissipation vs. Ambient Temperature
Fig. 2 - Typical Change of Working Voltage under Operating
Conditions at Tamb = 25 °C
Fig. 3 - Typical Change of Working Voltage vs.
Junction Temperature
Fig. 4 - Temperature Coefficient of VZ vs. Z-Voltage
Fig. 5 - Diode Capacitance vs. Z-Voltage
Fig. 6 - Forward Current vs. Forward Voltage
0 120 160
0
100
300
400
500
600
Ptot - Total Power Dissipation (mW)
Tamb - Ambient Temperature (°C)
200
95 9602
200
80
40
10 15 20
1
10
100
1000
V
Z
- Voltage Change (mV)
V
Z
- Z-Voltage (V)
25
95 9598
Tj = 25 °C
IZ = 5 mA
05
- 60 60 120 180
0.8
0.9
1.0
1.1
1.2
1.3
V
Ztn
- Relative Voltage Change
Tj - Junction Temperature (°C)
240
95 9599
0
VZtn = VZt/VZ (25 °C)
0
TK
VZ
= 10 x 10-4/K
8 x 10-4/K
2 x 10-4/K
6 x 10-4/K
4 x 10-4/K
- 4 x 10-4/K
- 2 x 10-4/K
- 5
0
5
10
15
VZ - Z-Voltage (V)
95 9600
IZ = 5 mA
0 10 203040 50
TKVZ - Temperature Coefficient
of VZ (10-4/K)
10 15
0
50
100
150
200
C
D
- Diode Capacitance (pF)
V
Z
- Z-Voltage (V)
25
95 9601
20
T
j
= 25 °C
V
R
= 2 V
05
0 0.2 0.4 0.6 0.8
0.001
0.01
0.1
1
10
100
1.0
95 9605
IF - Forward Current (mA)
VF - Forward Voltage (V)
Tj = 25 °C
TZM-M-Series
www.vishay.com Vishay Semiconductors
Rev. 1.1, 22-Nov-12 5Document Number: 83393
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Z-Current vs. Z-Voltage
Fig. 8 - Z-Current vs. Z-Voltage
Fig. 9 - Differential Z-Resistance vs. Z-Voltage
Fig. 10 - Thermal Response
820
95 9604
0
20
40
60
80
100
IZ - Z-Current (mA)
Ptot = 500 mW
Tamb = 25 °C
046 12
VZ - Z-Voltage (V)
15 20 25 30
0
10
20
30
40
50
IZ - Z-Current (mA)
VZ - Z-Voltage (V)
35
95 9607
Ptot = 500 mW
Tamb = 25 °C
0 101520
1
10
100
1000
25
95 9606
Tj = 25 °C
IZ = 1 mA
5 mA
10 mA
V
Z
- Z-Voltage (V)
r
Z
- Differential Z-Resistance (Ω)
5
1
10
100
1000
Z
thp
- Thermal Resistance for Pulse Cond. (K/W)
t
p
- Pulse Length (ms)
95 9603
10-1 100101102
t
p
/T = 0.5
t
p
/T = 0.2
t
p
/T = 0.1
t
p
/T = 0.05
t
p
/T = 0.02
t
p
/T = 0.01
Single Pulse R
thJA
= 300 K/W
T = T
j max.
- T
amb
i
ZM
= (- V
Z
+ (V
Z
2
+ 4r
zj
x T/Z
thp
)
1/2
)/(2r
zj
)
TZM-M-Series
www.vishay.com Vishay Semiconductors
Rev. 1.1, 22-Nov-12 6Document Number: 83393
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80
Cathode indification
0.47 (0.019) max.
2.5 (0.098) max. 1.25 (0.49) min.
3.7 (0.146)
3.3 (0.130)
5 (0.197) ref.
2 (0.079) min.
1.6 (0.063)
1.4 (0.055)
Foot print recommendation:
*
* The gap between plug and glass can
be either on cathode or anode side
Document no.:6.560-5005.01-4
Rev. 8 - Date: 07.June.2006
96 12070
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.