1 2 3 4 REFERENCE FOR REEL ACCORDING TO FEEDING DIRECTION GAUGE REEL OF 10000 FEMALE CONTACTS GAUGE 86566540064 86566540064LF # 24-28 - - # 20-24 - - REEL OF 5000 FEMALE CONTACTS A # 24-28 - - # 20-24 - - - REEL OF 5000 PIN CONTACTS REEL OF 10000 PIN CONTACTS A - 86564540064 86564540064LF # 24-28 86566510065 86566510065LF 86566540065 86566540065LF # 24-28 86564510065 86564510065LF 86564540065 86564540065LF # 20-24 86566520065 86566520065LF 86566530065 86566530065LF # 20-24 86564520065 86564520065LF 86564530065 86564530065LF # 24-28 86566510067 86566510067LF 86566540067 86566540067LF # 24-28 86564510067 86564510067LF 86564540067 86564540067LF # 20-24 86566520067 86566520067LF 86566530067 86566530067LF # 20-24 86564520067 86564520067LF 86564530067 86564530067LF SEE DETAIL B 200 mm 450 mm reel of 5000 600 mm reel of 10 000 B SEE DETAIL CLOSING LINE ABOVE B A CLOSING LINE ABOVE C C Manufacturer's code 25 mm DETAIL B SCALE 3/1 surface www.fciconnect.com ISO 1302 tolerance std ISO 406 projection mm ISO 1101 TOLERANCES UNLESS OTHERWISE SPECIFIED CJARRY 11/07/03 Eng - - Chr - - 0 Appr - - Product family Dr rev ecn no K I11-0003 - - E LS06-196 dr date AMR 2011-01-06 - - MPE 27/11/2006 F LS08-0096 MPE 2008/04/04 G LS08-0127 MPE 2008/05/13 H I09-0152 AMR 2009-07-27 J I10-0070 AMR 2010-03-09 title D NOTE : ROHS INFORMATIONS The LF products meet European union directives and other country regulations as described in GS-22-008 Terminations plating spec : 2um Nickel min + 2um Sn min Packaging Spec : see GS-14-920 - ANGULAR LINEAR 2 0.X 0.3 0.XX 0.1 0.XXX 0.05 CRIMP CONTACTS - catalog no Scale size A3 ECN D 5/1 I11-0003 8656 Spec ref dwg no Copyright FCI. DETAIL A SCALE 3/1 Rev. C01-8656-1536 customer sheet K 1 of 2 REV F - 2006-04-17 1 2 3 PDM: Rev:K 4 STATUS:Released Printed: Mar 05, 2011. 1 2 3 4 14.20 max CROSS SECTIONS FOR CT #20-24 A A B 1,75 0.2 1,65 +0/+0.1 9.45 max B SECTION 1,8 0,1 B 1,9 0,1 A 2.48 0.2 2.16 max 0,25 max A-A SECTION B-B NOTES 1- Material : Phosphor bronze, thickness 0.20 2 -Finish on contact area : termination 064:gold flash terminaion 065:076 Au / GXT termination 067:0,4 Au / GXT finish on termination : bright tin over nickel 3 -Wire range :20 to 28 AWG(see ref sheet 1/2) 4 -Max outer dia of wire insulator: -1.73 mm for contact #20-24 -1.02 mm for contact #24-28 5 -Current carrying capacity per contact: 5 Amps max when crimped to #20 AWG 5 Amps max when crimped to #22 AWG 3 Amps max when crimped to #24 AWG 2 Amps max when crimped to #26 AWG 1 Amps max when crimped to #28 AWG 6 -After 5 insertions into connector, contact retention must be 5 pounds axial load min 7 -When contact is crimped to 20 AWG, the insulation support crimped height must be 1.78 mm max to ensure a proper insertion into housing. 8-Reel should be continous without any contacts missing in between 9 -Packaging : Reel B 15.0 max CROSS SECTIONS FOR CT #24-28 2.12 max 0,25 max A 1,40 0,15 0,99 1,4 0.15 C Copyright FCI. 10.2 max SECTION A-A SECTION 1,5 0,1 1,5 0,1 C B-B DIMENSIONS FOR MALE & FEMALE 6,1 surface www.fciconnect.com - ISO 1302 tolerance std ISO 406 projection mm ISO 1101 TOLERANCES UNLESS OTHERWISE SPECIFIED CJARRY 11/07/03 Eng - - Chr - - 0 Appr - - Product family title 3,15 SCALE 5 ANGULAR LINEAR 2 0.X 0.3 0.XX 0.1 0.XXX 0.05 CRIMP CONTACTS - catalog no size A3 ECN Scale D 10/1 I11-0003 8656 Spec ref dwg no Dr Pitch7.62 D Rev. C01-8656-1536 customer sheet K 2 of 2 REV F - 2006-04-17 1 2 3 PDM: Rev:K 4 STATUS:Released Printed: Mar 05, 2011.