PCI9080RDK-401B - PLX Technology, Inc.

PCI 9080RDK-401B

Reference Design Kit with PCI SDK

The PLX PCI 9080RDK-401B simplifies your PCI design providing

you with a complete hardware and software development envi-

ronment. The reference design kit includes a PCI v2.1 compliant

board based on the powerful combination of the PLX PCI

9080 Bus Master I/O Accelerator Chip and the IBM PowerPC

401GF 32-bit embedded RISC processor as the local CPU. Also

included in the reference design kit is the PLX PCI software develop-

ment kit (SDK) which features a complete set of software development tools

including

host and local side PCI APIs for the PCI 9080, the Board Support

Package (BSP) ”C” source code necessary for porting to the target design, and

sample

Windows

drivers which significantly reduce the time necessary to

develop PCI software. Also included is PLXMon

98, a robust and comprehen-

sive Windows NT based GUI tool that allows for interactive PCI and local

bus device monitoring, debugging, configuration, and code download to the

RDK board.

The PCI 9080RDK-401B addresses the need to quickly bring your embedded

design to market while providing you with a longer term investment, a software

development platform that will enable you to migrate from the PCI 9080 to

future PLX products such as the IOP 480 (Intelligent I/O processor).

The PCI 9080 Bus Master I/O Accelerator interface chip available from PLX

provides a compact, high performance PCI bus master interface for adapter

boards and embedded systems. The PCI 9080 includes two high performance

DMA channels, programmable burst modes, and messaging functions. In

addition, the programmable local bus can be configured to directly connect to

a wide variety of processors, controllers, and memory subsystems.

Features

■

PCI Version 2.1 compliant

board based on the powerful

PCI 9080 Bus Master I/O

Accelerator chip

■

Full Bus Master and Burst

Management–Directly

supports PCI Target, PCI

Master, DMA, and I2O

messaging transfers

■

IBM PowerPC 401GF 32-bit

50MHz RISC processor

■

Complete OrCAD schematics,

FPGA verilog code, and

hardware reference manual

■

Sample PCI 9080 and

Data Book

PCI SDK:

■

PLXMon 98, a comprehensive

GUI tool for PCI bus monitor-

ing and debugging

■

Flexible PCI API libraries for

host and the local CPU are

included

■

Sample Windows NT device

drivers and source code are

included

■

PLXRom firmware debugging

monitor with loader

■

Comprehensive reference

manuals for PLXMon 98

and PCI SDK

Compatible Tools:

■

Compatible with the PCI I2O

Manager and I2O SDK avail-

able from PLX Technology

for complete I2O development

solutions

■

Compatible with PowerPC

development tools available

from IBM and other third

parties

TECHNOLOGY ®

PCI 9080RDK-401B

PCI Bus Interface PCI 9080 Interface Chip

Processor IBM PowerPC 401GF

Processor Speed 50MHz

Local Bus Speed 25MHz

PCI Bus Speed Same as Local Bus, or set by

Host-33MHz max

DRAM 16 MB

SRAM 512 KB

FLASH 512 KB

Memory Controller FPGA

RS-232 Serial Ports 1

JTAG Compatible with IBM

RISCWatch®debugger

Expansion Capability POM interface

Complete OrCAD Schematics,

FPGA Verilog Code, Hardware

Reference Manual and

PCI 9080 Data Book

Yes

PLD/FPGA Yes

Sample Chip PCI 9080

Evaluation Compiler IBM High “C” limited compiler

PLX and PLXMon 98 are trademarks of PLX Technology, Inc. which may be registered in some jurisdictions.

All other product names that appear in this material are for identification purposes only and are acknowledged to be trademarks or registered

trademarks of their respective companies.

Information supplied by PLX is believed to be accurate and reliable, but PLX Technology, Inc. assumes no responsibility for any errors that may appear

in this material. PLX Technology reserves the right, without notice, to make changes in product design or specification.

PLX PCI SDK Features

TECHNOLOGY ®

PLX Technology, Inc.

390 Potrero Ave.

Sunnyvale, CA94086 USA

Tel: 1-800-759-3735

Fax: 1-408-774-2169

Email: info@plxtech.com

Web Site: www.plxtech.com

Features Benefits

PCI 9080 Software API Libraries for IBM PPC, PC implementation of PCI software and migration to

Motorola PPC and Intel i960 family of processors future PLX devices

Board Support Package (BSP) “C” Source Code Allows easy porting to customer design

Sample Windows NT Drivers and “C” Source Code Allows effortless creation of PLX device drivers

for RTOS or custom software implementation

PLXMon 98 PCI Debugger Allows smooth configuration and text

modification of PCI/Local bus devices

PLXRom Debug Monitor Firmware with Loader Sample boot FLASH code with serial debugger and

supports downloading of code onto RDKs

or customer design

Programmer’s Reference Manual Supporting documentation

Software Development Tools Compatible with IBM High “C” and third party tools

Product Ordering Information

PCI 9080 PCI to Local Bus Master I/O Accelerator Chip

PCI 9080RDK PCI 9080 Reference Design Kits

PCI 9054 PCI to Local Bus Master Chip

PCI 9054RDK-860 PCI 9054 Reference Design Kit with Motorola MPC860 CPU

CompactPCI 9054RDK-860 PCI 9054 CompactPCI Reference Design Kit with Motorola MPC860 CPU

I2O SDK I2O Software Development Kit for PCI 9080

PCI SDK PCI Software Development Kit for PCI 9080

*See PLX web site for latest version and product support information

90804B-RPB-010 7/98 1.5K