SIOV metal oxide varistors Leaded varistors, StandarD series Series/Type: B722* Date: April 2011 (c) EPCOS AG 2011. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Leaded varistors B722* StandarD series Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned copper wire Features Wide operating voltage range 11 ... 1100 VRMS High surge current ratings up to 8 kA No derating up to 85 C ambient temperature PSpice models Approvals UL CSA (all types K115) VDE CQC S05/07 (K11 ... K460), S10/S14 (K11 ... K680), S20 (K11 ... K1000) IEC Delivery mode Bulk (standard), taped versions on reel or in Ammo pack upon request. For further details refer chapter "Taping, packaging and lead configuration" for leaded varistors. Options S10* types with lead spacing 5.0 mm and S20* types with lead spacing 7.5 mm are also available on request. General technical data Climatic category Operating temperature Storage temperature Electric strength Insulation resistance Response time Please read Cautions and warnings and Important notes at the end of this document. to IEC 60068-1 to IEC 61051 to IEC 61051 to IEC 61051 Page 2 of 46 40/85/56 40 ... + 85 40 ... +125 2.5 100 < 25 C C kVRMS M ns Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 C) Ordering code VRMS = 11 V B72205S0110K101 B72207S0110K101 B72210S0110K101 B72214S0110K101 B72220S0110K101 VRMS = 14 V B72205S0140K101 B72207S0140K101 B72210S0140K101 B72214S0140K101 B72220S0140K101 VRMS = 17 V B72205S0170K101 B72207S0170K101 B72210S0170K101 B72214S0170K101 B72220S0170K101 VRMS = 20 V B72205S0200K101 B72207S0200K101 B72210S0200K101 B72214S0200K101 B72220S0200K101 VRMS = 25 V B72205S0250K101 B72207S0250K101 B72210S0250K101 B72214S0250K101 B72220S0250K101 VRMS = 30 V B72205S0300K101 B72207S0300K101 B72210S0300K101 B72214S0300K101 B72220S0300K101 Type (untaped) SIOV- VRMS VDC V V imax (8/20 s) A Wmax (2 ms) J Pmax W S05K11 S07K11 S10K11 S14K11 S20K11 11 11 11 11 11 14 14 14 14 14 100 250 500 1000 2000 0.3 0.8 1.7 3.2 10.0 0.01 0.02 0.05 0.10 0.20 S05K14 S07K14 S10K14 S14K14 S20K14 14 14 14 14 14 18 181) 181) 181) 181) 100 250 500 1000 2000 0.4 0.9 2.0 4.0 12.0 0.01 0.02 0.05 0.10 0.20 S05K17 S07K17 S10K17 S14K17 S20K17 17 17 17 17 17 22 22 22 22 22 100 250 500 1000 2000 0.5 1.1 2.5 5.0 14.0 0.01 0.02 0.05 0.10 0.20 S05K20 S07K20 S10K20 S14K20 S20K20 20 20 20 20 20 26 26 26 26 26 100 250 500 1000 2000 0.6 1.3 3.1 6.0 18.0 0.01 0.02 0.05 0.10 0.20 S05K25 S07K25 S10K25 S14K25 S20K25 25 25 25 25 25 31 31 31 31 31 100 250 500 1000 2000 0.7 1.6 3.7 7.0 22.0 0.01 0.02 0.05 0.10 0.20 S05K30 S07K30 S10K30 S14K30 S20K30 30 30 30 30 30 38 38 38 38 38 100 250 500 1000 2000 0.9 2.0 4.4 9.0 26.0 0.01 0.02 0.05 0.10 0.20 1) Jump-start strength (max. 24 V, 5 minutes) Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 46 Leaded varistors B722* StandarD series Characteristics (TA = 25 C) Ordering code VRMS = 11 V B72205S0110K101 B72207S0110K101 B72210S0110K101 B72214S0110K101 B72220S0110K101 VRMS = 14 V B72205S0140K101 B72207S0140K101 B72210S0140K101 B72214S0140K101 B72220S0140K101 VRMS = 17 V B72205S0170K101 B72207S0170K101 B72210S0170K101 B72214S0170K101 B72220S0170K101 VRMS = 20 V B72205S0200K101 B72207S0200K101 B72210S0200K101 B72214S0200K101 B72220S0200K101 VRMS = 25 V B72205S0250K101 B72207S0250K101 B72210S0250K101 B72214S0250K101 B72220S0250K101 VRMS = 30 V B72205S0300K101 B72207S0300K101 B72210S0300K101 B72214S0300K101 B72220S0300K101 Vv (1 mA) V Vv (1 mA) % vc,max (ic) V ic A Ctyp (1 kHz) pF 18 18 18 18 18 10 10 10 10 10 36 36 36 36 36 1.0 2.5 5.0 10.0 20.0 1750 2750 6250 12100 23000 22 22 22 22 22 10 10 10 10 10 43 43 43 43 43 1.0 2.5 5.0 10.0 20.0 1450 2300 5200 9950 19000 27 27 27 27 27 10 10 10 10 10 53 53 53 53 53 1.0 2.5 5.0 10.0 20.0 1200 1900 4350 8200 15600 33 33 33 33 33 10 10 10 10 10 65 65 65 65 65 1.0 2.5 5.0 10.0 20.0 980 1600 3650 6800 13000 39 39 39 39 39 10 10 10 10 10 77 77 77 77 77 1.0 2.5 5.0 10.0 20.0 850 1400 3200 5850 11100 47 47 47 47 47 10 10 10 10 10 93 93 93 93 93 1.0 2.5 5.0 10.0 20.0 720 1200 2750 4950 9350 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 46 Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 C) Ordering code VRMS = 35 V B72205S0350K101 B72207S0350K101 B72210S0350K101 B72214S0350K101 B72220S0350K101 VRMS = 40 V B72205S0400K101 B72207S0400K101 B72210S0400K101 B72214S0400K101 B72220S0400K101 VRMS = 50 V B72205S0500K101 B72207S0500K101 B72210S0500K101 B72214S0500K101 B72220S0500K101 VRMS = 60 V B72205S0600K101 B72207S0600K101 B72210S0600K101 B72214S0600K101 B72220S0600K101 VRMS = 75 V B72205S0750K101 B72207S0750K101 B72210S0750K101 B72214S0750K101 B72220S0750K101 VRMS = 95 V B72205S0950K101 B72207S0950K101 B72210S0950K101 B72214S0950K101 B72220S0950K101 Type (untaped) SIOV- VRMS VDC V V imax (8/20 s) A Wmax (2 ms) J Pmax W S05K35 S07K35 S10K35 S14K35 S20K35 35 35 35 35 35 45 45 45 45 45 100 250 500 1000 2000 1.1 2.5 5.4 10.0 33.0 0.01 0.02 0.05 0.10 0.20 S05K40 S07K40 S10K40 S14K40 S20K40 40 40 40 40 40 56 56 56 56 56 100 250 500 1000 2000 1.3 3.0 6.4 13.0 37.0 0.01 0.02 0.05 0.10 0.20 S05K50 S07K50 S10K50 S14K50 S20K50 50 50 50 50 50 65 65 65 65 65 400 1200 2500 4500 6500 1.8 4.2 8.4 15.0 27.0 0.10 0.25 0.40 0.60 1.00 S05K60 S07K60 S10K60 S14K60 S20K60 60 60 60 60 60 85 85 85 85 85 400 1200 2500 4500 6500 2.2 4.8 10.0 17.0 33.0 0.10 0.25 0.40 0.60 1.00 S05K75 S07K75 S10K75 S14K75 S20K75 75 75 75 75 75 100 100 100 100 100 400 1200 2500 4500 6500 2.5 5.9 12.0 20.0 40.0 0.10 0.25 0.40 0.60 1.00 S05K95 S07K95 S10K95 S14K95 S20K95 95 95 95 95 95 125 125 125 125 125 400 1200 2500 4500 6500 3.4 7.6 15.0 25.0 50.0 0.10 0.25 0.40 0.60 1.00 Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 46 Leaded varistors B722* StandarD series Characteristics (TA = 25 C) Ordering code VRMS = 35 V B72205S0350K101 B72207S0350K101 B72210S0350K101 B72214S0350K101 B72220S0350K101 VRMS = 40 V B72205S0400K101 B72207S0400K101 B72210S0400K101 B72214S0400K101 B72220S0400K101 VRMS = 50 V B72205S0500K101 B72207S0500K101 B72210S0500K101 B72214S0500K101 B72220S0500K101 VRMS = 60 V B72205S0600K101 B72207S0600K101 B72210S0600K101 B72214S0600K101 B72220S0600K101 VRMS = 75 V B72205S0750K101 B72207S0750K101 B72210S0750K101 B72214S0750K101 B72220S0750K101 VRMS = 95 V B72205S0950K101 B72207S0950K101 B72210S0950K101 B72214S0950K101 B72220S0950K101 Vv (1 mA) V Vv (1 mA) % vc,max (ic) V ic A Ctyp (1 kHz) pF 56 56 56 56 56 10 10 10 10 10 110 110 110 110 110 1.0 2.5 5.0 10.0 20.0 620 1050 2400 4200 8000 68 68 68 68 68 10 10 10 10 10 135 135 135 135 135 1.0 2.5 5.0 10.0 20.0 520 900 2100 3550 6750 82 82 82 82 82 10 10 10 10 10 135 135 135 135 135 5.0 10.0 25.0 50.0 100.0 300 530 950 1800 3800 100 100 100 100 100 10 10 10 10 10 165 165 165 165 165 5.0 10.0 25.0 50.0 100.0 250 480 870 1650 3600 120 120 120 120 120 10 10 10 10 10 200 200 200 200 200 5.0 10.0 25.0 50.0 100.0 210 430 720 1370 2900 150 150 150 150 150 10 10 10 10 10 250 250 250 250 250 5.0 10.0 25.0 50.0 100.0 185 335 690 1200 2500 Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 46 Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 C) Ordering code VRMS = 115 V B72205S0111K101 B72207S0111K101 B72210S0111K101 B72214S0111K101 B72220S0111K101 VRMS = 130 V B72205S0131K101 B72207S0131K101 B72210S0131K101 B72214S0131K101 B72220S0131K101 VRMS = 140 V B72205S0141K101 B72207S0141K101 B72210S0141K101 B72214S0141K101 B72220S0141K101 VRMS = 150 V B72205S0151K101 B72207S0151K101 B72210S0151K101 B72214S0151K101 B72220S0151K101 VRMS = 175 V B72205S0171K101 B72207S0171K101 B72210S0171K101 B72214S0171K101 B72220S0171K101 VRMS = 230 V B72205S0231K101 B72207S0231K101 B72210S0231K101 B72214S0231K101 B72220S0231K101 Type (untaped) SIOV- VRMS VDC V V S05K115 S07K115 S10K115 S14K115 S20K115 115 115 115 115 115 150 150 150 150 150 S05K130 S07K130 S10K130 S14K130 S20K130 130 130 130 130 130 S05K140 S07K140 S10K140 S14K140 S20K140 Wmax (2 ms) J Pmax 400 1200 2500 4500 6500 3.6 8.4 18.0 30.0 60.0 0.10 0.25 0.40 0.60 1.00 170 170 170 170 170 400 1200 2500 4500 8000 4.2 9.5 19.0 34.0 74.0 0.10 0.25 0.40 0.60 1.00 140 140 140 140 140 180 180 180 180 180 400 1200 2500 4500 8000 4.5 10.0 22.0 36.0 78.0 0.10 0.25 0.40 0.60 1.00 S05K150 S07K150 S10K150 S14K150 S20K150 150 150 150 150 150 200 200 200 200 200 400 1200 2500 4500 8000 4.9 11.0 24.0 40.0 85.0 0.10 0.25 0.40 0.60 1.00 S05K175 S07K175 S10K175 S14K175 S20K175 175 175 175 175 175 225 225 225 225 225 400 1200 2500 4500 8000 5.6 13.0 28.0 46.0 98.0 0.10 0.25 0.40 0.60 1.00 S05K230 S07K230 S10K230 S14K230 S20K230 230 230 230 230 230 300 300 300 300 300 400 1200 2500 4500 8000 7.2 17.0 36.0 60.0 130.0 0.10 0.25 0.40 0.60 1.00 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 46 imax (8/20 s) A W Leaded varistors B722* StandarD series Characteristics (TA = 25 C) Ordering code VRMS = 115 V B72205S0111K101 B72207S0111K101 B72210S0111K101 B72214S0111K101 B72220S0111K101 VRMS = 130 V B72205S0131K101 B72207S0131K101 B72210S0131K101 B72214S0131K101 B72220S0131K101 VRMS = 140 V B72205S0141K101 B72207S0141K101 B72210S0141K101 B72214S0141K101 B72220S0141K101 VRMS = 150 V B72205S0151K101 B72207S0151K101 B72210S0151K101 B72214S0151K101 B72220S0151K101 VRMS = 175 V B72205S0171K101 B72207S0171K101 B72210S0171K101 B72214S0171K101 B72220S0171K101 VRMS = 230 V B72205S0231K101 B72207S0231K101 B72210S0231K101 B72214S0231K101 B72220S0231K101 Vv (1 mA) V Vv (1 mA) % vc,max (ic) V ic A Ctyp (1 kHz) pF 180 180 180 180 180 10 10 10 10 10 300 300 300 300 300 5.0 10.0 25.0 50.0 100.0 155 280 580 1000 2100 205 205 205 205 205 10 10 10 10 10 340 340 340 340 340 5.0 10.0 25.0 50.0 100.0 135 245 500 880 1850 220 220 220 220 220 10 10 10 10 10 360 360 360 360 360 5.0 10.0 25.0 50.0 100.0 125 230 470 820 1700 240 240 240 240 240 10 10 10 10 10 395 395 395 395 395 5.0 10.0 25.0 50.0 100.0 115 210 430 750 1550 270 270 270 270 270 10 10 10 10 10 455 455 455 455 455 5.0 10.0 25.0 50.0 100.0 100 190 380 670 1350 360 360 360 360 360 10 10 10 10 10 595 595 595 595 595 5.0 10.0 25.0 50.0 100.0 70 130 265 530 1000 Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 46 Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 C) Ordering code VRMS = 250 V B72205S0251K101 B72207S0251K101 B72210S0251K101 B72214S0251K101 B72220S0251K101 VRMS = 275 V B72205S0271K101 B72207S0271K101 B72210S0271K101 B72214S0271K101 B72220S0271K101 VRMS = 300 V B72205S0301K101 B72207S0301K101 B72210S0301K101 B72214S0301K101 B72220S0301K101 VRMS = 320 V B72205S0321K101 B72207S0321K101 B72210S0321K101 B72214S0321K101 B72220S0321K101 VRMS = 385 V B72205S0381K101 B72207S0381K101 B72210S0381K101 B72214S0381K101 B72220S0381K101 VRMS = 420 V B72205S0421K101 B72207S0421K101 B72210S0421K101 B72214S0421K101 B72220S0421K101 Type (untaped) SIOV- VRMS VDC imax (8/20 s) A Wmax (2 ms) J Pmax V V S05K250 S07K250 S10K250 S14K250 S20K250 250 250 250 250 250 320 320 320 320 320 400 1200 2500 4500 8000 8.2 19.0 38.0 65.0 140.0 0.10 0.25 0.40 0.60 1.00 S05K275 S07K275 S10K275 S14K275 S20K275 275 275 275 275 275 350 350 350 350 350 400 1200 2500 4500 8000 8.6 21.0 43.0 71.0 151.0 0.10 0.25 0.40 0.60 1.00 S05K300 S07K300 S10K300 S14K300 S20K300 300 300 300 300 300 385 385 385 385 385 400 1200 2500 4500 8000 9.6 23.0 47.0 76.0 173.0 0.10 0.25 0.40 0.60 1.00 S05K320 S07K320 S10K320 S14K320 S20K320 320 320 320 320 320 420 420 420 420 420 400 1200 2500 4500 8000 11.0 25.0 50.0 84.0 184.0 0.10 0.25 0.40 0.60 1.00 S05K385 S07K385 S10K385 S14K385 S20K385 385 385 385 385 385 505 505 505 505 505 400 1200 2500 4500 8000 13.0 28.0 40.0 80.0 150.0 0.10 0.25 0.40 0.60 1.00 S05K420 S07K420 S10K420 S14K420 S20K420 420 420 420 420 420 560 560 560 560 560 400 1200 2500 4500 8000 14.0 32.0 45.0 90.0 175.0 0.10 0.25 0.40 0.60 1.00 Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 46 W Leaded varistors B722* StandarD series Characteristics (TA = 25 C) Ordering code VRMS = 250 V B72205S0251K101 B72207S0251K101 B72210S0251K101 B72214S0251K101 B72220S0251K101 VRMS = 275 V B72205S0271K101 B72207S0271K101 B72210S0271K101 B72214S0271K101 B72220S0271K101 VRMS = 300 V B72205S0301K101 B72207S0301K101 B72210S0301K101 B72214S0301K101 B72220S0301K101 VRMS = 320 V B72205S0321K101 B72207S0321K101 B72210S0321K101 B72214S0321K101 B72220S0321K101 VRMS = 385 V B72205S0381K101 B72207S0381K101 B72210S0381K101 B72214S0381K101 B72220S0381K101 VRMS = 420 V B72205S0421K101 B72207S0421K101 B72210S0421K101 B72214S0421K101 B72220S0421K101 Vv (1 mA) V Vv (1 mA) % vc,max (ic) V ic A Ctyp (1 kHz) pF 390 390 390 390 390 10 10 10 10 10 650 650 650 650 650 5.0 10.0 25.0 50.0 100.0 65 120 245 490 940 430 430 430 430 430 10 10 10 10 10 710 710 710 710 710 5.0 10.0 25.0 50.0 100.0 60 110 220 440 850 470 470 470 470 470 10 10 10 10 10 775 775 775 775 775 5.0 10.0 25.0 50.0 100.0 55 100 200 400 780 510 510 510 510 510 10 10 10 10 10 840 840 840 840 840 5.0 10.0 25.0 50.0 100.0 50 90 185 370 720 620 620 620 620 620 10 10 10 10 10 1025 1025 1025 1025 1025 5.0 10.0 25.0 50.0 100.0 45 85 175 315 600 680 680 680 680 680 10 10 10 10 10 1120 1120 1120 1120 1120 5.0 10.0 25.0 50.0 100.0 40 75 165 290 550 Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 46 Leaded varistors B722* StandarD series Electrical specifications and ordering codes Maximum ratings (TA = 85 C) Ordering code VRMS = 440 V B72205S0441K101 B72207S0441K101 B72210S0441K101 B72214S0441K101 B72220S0441K101 VRMS = 460 V B72205S0461K101 B72207S0461K101 B72210S0461K101 B72214S0461K101 B72220S0461K101 VRMS = 510 V B72210S0511K101 B72214S0511K101 B72220S0511K101 VRMS = 550 V B72210S0551K101 B72214S0551K101 B72220S0551K101 VRMS = 625 V B72210S0621K101 B72214S0621K101 B72220S0621K101 VRMS = 680 V B72210S0681K101 B72214S0681K101 B72220S0681K101 VRMS = 1100 V B72214S0102K101 B72220S0102K101 Type (untaped) SIOV- VRMS VDC imax (8/20 s) A Wmax (2 ms) J Pmax V V S05K440 S07K440 S10K440 S14K440 S20K440 440 440 440 440 440 585 585 585 585 585 400 1200 2500 4500 8000 16.0 34.0 47.0 95.0 185.0 0.10 0.25 0.40 0.60 1.00 S05K460 S07K460 S10K460 S14K460 S20K460 460 460 460 460 460 615 615 615 615 615 400 1200 2500 4500 8000 18.0 36.0 50.0 100.0 195.0 0.10 0.25 0.40 0.60 1.00 S10K510 S14K510 S20K510 510 510 510 670 670 670 2500 4500 6500 55.0 110.0 190.0 0.40 0.60 1.00 S10K550 S14K550 S20K550 550 550 550 745 745 745 2500 4500 6500 60.0 120.0 210.0 0.40 0.60 1.00 S10K625 S14K625 S20K625 625 625 625 825 825 825 2500 4500 6500 68.0 130.0 230.0 0.40 0.60 1.00 S10K680 S14K680 S20K680 680 680 680 895 895 895 2500 4500 6500 72.0 140.0 250.0 0.40 0.60 1.00 1100 1100 1465 1465 4500 6500 230.0 410.0 0.60 1.00 S14K10001) S20K10001) 1) Operating voltage differs from type designation. Please read Cautions and warnings and Important notes at the end of this document. Page 11 of 46 W Leaded varistors B722* StandarD series Characteristics (TA = 25 C) Ordering code VRMS = 440 V B72205S0441K101 B72207S0441K101 B72210S0441K101 B72214S0441K101 B72220S0441K101 VRMS = 460 V B72205S0461K101 B72207S0461K101 B72210S0461K101 B72214S0461K101 B72220S0461K101 VRMS = 510 V B72210S0511K101 B72214S0511K101 B72220S0511K101 VRMS = 550 V B72210S0551K101 B72214S0551K101 B72220S0551K101 VRMS = 625 V B72210S0621K101 B72214S0621K101 B72220S0621K101 VRMS = 680 V B72210S0681K101 B72214S0681K101 B72220S0681K101 VRMS = 1100 V B72214S0102K101 B72220S0102K101 Vv (1 mA) % vc,max (ic) V ic 715 715 715 715 715 10 10 10 10 10 1180 1180 1180 1180 1180 5.0 10.0 25.0 50.0 100.0 37 72 158 275 530 750 750 750 750 750 10 10 10 10 10 1240 1240 1240 1240 1240 5.0 10.0 25.0 50.0 100.0 35 70 150 260 500 820 820 820 10 10 10 1355 1355 1355 25.0 50.0 100.0 140 240 460 910 910 910 10 10 10 1500 1500 1500 25.0 50.0 100.0 120 215 410 1000 1000 1000 10 10 10 1650 1650 1650 25.0 50.0 100.0 110 200 380 1100 1100 1100 10 10 10 1815 1815 1815 25.0 50.0 100.0 100 180 340 1800 1800 10 10 2970 2970 50.0 100.0 110 210 Vv (1 mA) V Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 46 A Ctyp (1 kHz) pF Leaded varistors B722* StandarD series Dimensional drawings Weight Nominal diameter mm 5 7 10 14 20 VRMS V 11 ... 460 11 ... 460 11 ... 680 11 ... 1000 11 ... 1000 Weight g 0.3 ... 0.7 0.4 ... 1.1 1.0 ... 3.0 1.4 ... 7.6 2.7 ... 15.7 The weight of varistors in between these voltage classes can be interpolated. Dimensions Ordering code VRMS = 11 V B72205S0110K101 B72207S0110K101 B72210S0110K101 B72214S0110K101 B72220S0110K101 VRMS = 14 V B72205S0140K101 B72207S0140K101 B72210S0140K101 B72214S0140K101 B72220S0140K101 VRMS = 17 V B72205S0170K101 B72207S0170K101 B72210S0170K101 B72214S0170K101 B72220S0170K101 VRMS = 20 V B72205S0200K101 B72207S0200K101 B72210S0200K101 B72214S0200K101 B72220S0200K101 [e] 1 mm a 1 mm wmax mm thmax mm hmax mm lmin mm d 0.05 mm 5.0 5.0 7.5 7.5 10.0 1.2 1.2 1.4 1.4 1.5 7.0 9.0 12.0 15.5 21.5 3.3 3.4 4.0 4.0 4.5 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.3 1.3 1.5 1.5 1.6 7.0 9.0 12.0 15.5 21.5 3.4 3.5 4.2 4.2 4.6 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.4 1.4 1.6 1.7 1.8 7.0 9.0 12.0 15.5 21.5 3.5 3.6 4.4 4.4 4.8 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.2 1.2 1.8 1.9 2.1 7.0 9.0 12.0 15.5 21.5 3.5 3.6 4.5 4.6 5.1 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 46 Leaded varistors B722* StandarD series Ordering code VRMS = 25 V B72205S0250K101 B72207S0250K101 B72210S0250K101 B72214S0250K101 B72220S0250K101 VRMS = 30 V B72205S0300K101 B72207S0300K101 B72210S0300K101 B72214S0300K101 B72220S0300K101 VRMS = 35 V B72205S0350K101 B72207S0350K101 B72210S0350K101 B72214S0350K101 B72220S0350K101 VRMS = 40 V B72205S0400K101 B72207S0400K101 B72210S0400K101 B72214S0400K101 B72220S0400K101 VRMS = 50 V B72205S0500K101 B72207S0500K101 B72210S0500K101 B72214S0500K101 B72220S0500K101 VRMS = 60 V B72205S0600K101 B72207S0600K101 B72210S0600K101 B72214S0600K101 B72220S0600K101 VRMS = 75 V B72205S0750K101 B72207S0750K101 B72210S0750K101 B72214S0750K101 B72220S0750K101 [e] 1 mm a 1 mm wmax mm thmax mm hmax mm lmin mm d 0.05 mm 5.0 5.0 7.5 7.5 10.0 1.3 1.3 1.6 1.7 1.8 7.0 9.0 12.0 15.5 21.5 3.6 3.7 4.2 4.2 4.7 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.5 1.5 1.7 1.8 2.0 7.0 9.0 12.0 15.5 21.5 3.6 3.7 4.4 4.4 4.9 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.6 1.6 1.8 2.0 2.2 7.0 9.0 12.0 15.5 21.5 3.7 3.9 4.4 4.5 5.1 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.8 1.8 2.1 2.2 2.4 7.0 9.0 12.0 15.5 21.5 3.9 4.1 4.8 4.9 5.4 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.2 1.2 1.4 1.4 1.5 7.0 9.0 12.0 15.5 21.5 3.3 3.3 3.9 3.9 4.3 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.2 1.2 1.4 1.5 1.6 7.0 9.0 12.0 15.5 21.5 3.3 3.3 4.0 4.0 4.4 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.3 1.3 1.5 1.5 1.6 7.0 9.0 12.0 15.5 21.5 3.4 3.6 4.2 4.2 4.6 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 46 Leaded varistors B722* StandarD series Ordering code VRMS = 95 V B72205S0950K101 B72207S0950K101 B72210S0950K101 B72214S0950K101 B72220S0950K101 VRMS = 115 V B72205S0111K101 B72207S0111K101 B72210S0111K101 B72214S0111K101 B72220S0111K101 VRMS = 130 V B72205S0131K101 B72207S0131K101 B72210S0131K101 B72214S0131K101 B72220S0131K101 VRMS = 140 V B72205S0141K101 B72207S0141K101 B72210S0141K101 B72214S0141K101 B72220S0141K101 VRMS = 150 V B72205S0151K101 B72207S0151K101 B72210S0151K101 B72214S0151K101 B72220S0151K101 VRMS = 175 V B72205S0171K101 B72207S0171K101 B72210S0171K101 B72214S0171K101 B72220S0171K101 VRMS = 230 V B72205S0231K101 B72207S0231K101 B72210S0231K101 B72214S0231K101 B72220S0231K101 [e] 1 mm a 1 mm wmax mm thmax mm hmax mm lmin mm d 0.05 mm 5.0 5.0 7.5 7.5 10.0 1.3 1.3 1.5 1.5 1.6 7.0 9.0 12.0 15.5 21.5 3.4 3.4 4.0 4.0 4.5 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.5 1.5 1.6 1.7 1.8 7.0 9.0 12.0 15.5 21.5 3.6 3.6 4.2 4.2 4.6 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.6 1.6 1.8 1.9 2.0 7.0 9.0 12.0 15.5 21.5 3.6 3.6 4.2 4.2 4.7 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.7 1.7 1.9 2.0 2.1 7.0 9.0 12.0 15.5 21.5 3.7 3.7 4.3 4.3 4.8 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.8 1.8 2.0 2.1 2.2 7.0 9.0 12.0 15.5 21.5 3.8 3.8 4.4 4.4 4.9 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 2.0 2.0 2.2 2.2 2.3 7.0 9.0 12.0 15.5 21.5 3.9 4.0 4.6 4.6 5.0 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 1.8 1.8 2.0 2.0 2.1 7.0 9.0 12.0 15.5 21.5 4.0 4.0 4.7 4.7 5.1 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 Please read Cautions and warnings and Important notes at the end of this document. Page 15 of 46 Leaded varistors B722* StandarD series Ordering code VRMS = 250 V B72205S0251K101 B72207S0251K101 B72210S0251K101 B72214S0251K101 B72220S0251K101 VRMS = 275 V B72205S0271K101 B72207S0271K101 B72210S0271K101 B72214S0271K101 B72220S0271K101 VRMS = 300 V B72205S0301K101 B72207S0301K101 B72210S0301K101 B72214S0301K101 B72220S0301K101 VRMS = 320 V B72205S0321K101 B72207S0321K101 B72210S0321K101 B72214S0321K101 B72220S0321K101 VRMS = 385 V B72205S0381K101 B72207S0381K101 B72210S0381K101 B72214S0381K101 B72220S0381K101 VRMS = 420 V B72205S0421K101 B72207S0421K101 B72210S0421K101 B72214S0421K101 B72220S0421K101 VRMS = 440 V B72205S0441K101 B72207S0441K101 B72210S0441K101 [e] 1 mm a 1 mm wmax mm thmax mm hmax mm lmin mm d 0.05 mm 5.0 5.0 7.5 7.5 10.0 1.8 1.8 2.0 2.0 2.2 7.0 9.0 12.0 15.5 21.5 4.2 4.2 4.8 4.8 5.3 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 2.0 2.0 2.2 2.2 2.3 7.0 9.0 12.0 15.5 21.5 4.3 4.4 5.0 5.0 5.4 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 2.1 2.1 2.3 2.3 2.4 7.0 9.0 12.0 15.5 21.5 4.5 4.5 5.1 5.2 5.6 8.5 11.0 14.5 18.5 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 2.3 2.3 2.4 2.4 2.6 7.0 9.0 12.0 15.5 21.5 4.8 4.8 5.4 5.4 5.8 9.0 11.5 15.0 19.0 25.5 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 2.5 2.5 2.7 2.7 2.8 7.0 9.0 12.0 15.5 21.5 5.1 5.2 5.8 5.9 6.3 9.0 11.5 15.0 19.0 26.0 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 7.5 10.0 2.8 2.8 2.9 2.9 3.1 7.0 9.0 12.0 15.5 21.5 5.4 5.4 6.1 6.1 6.5 9.0 11.5 15.0 19.0 26.0 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 5.0 5.0 7.5 2.8 2.8 3.0 7.0 9.0 12.0 5.5 5.5 6.2 9.0 11.5 15.0 25.0 25.0 25.0 0.6 0.6 0.8 Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 46 Leaded varistors B722* StandarD series Ordering code VRMS = 440 V B72214S0441K101 B72220S0441K101 VRMS = 460 V B72205S0461K101 B72207S0461K101 B72210S0461K101 B72214S0461K101 B72220S0461K101 VRMS = 510 V B72210S0511K101 B72214S0511K101 B72220S0511K101 VRMS = 550 V B72210S0551K101 B72214S0551K101 B72220S0551K101 VRMS = 625 V B72210S0621K101 B72214S0621K101 B72220S0621K101 VRMS = 680 V B72210S0681K101 B72214S0681K101 B72220S0681K101 VRMS = 1100 V B72214S0102K101 B72220S0102K101 [e] 1 mm a 1 mm wmax mm thmax mm hmax mm lmin mm d 0.05 mm 7.5 10.0 3.0 3.1 15.5 21.5 6.3 6.7 19.0 26.0 25.0 25.0 0.8 1.0 5.0 5.0 7.5 7.5 10.0 3.0 3.0 3.1 3.1 3.3 7.0 9.0 12.0 15.5 21.5 5.7 5.7 6.3 6.4 6.8 9.0 11.5 15.0 19.0 26.0 25.0 25.0 25.0 25.0 25.0 0.6 0.6 0.8 0.8 1.0 7.5 7.5 10.0 3.4 3.4 3.5 12.0 15.5 21.5 6.7 6.8 7.1 15.0 19.0 26.0 25.0 25.0 25.0 0.8 0.8 1.0 7.5 7.5 10.0 3.7 3.7 3.9 12.0 15.5 21.5 7.1 7.2 7.5 15.0 19.0 26.0 25.0 25.0 25.0 0.8 0.8 1.0 7.5 7.5 10.0 4.0 4.0 4.2 12.0 15.5 21.5 7.5 7.5 7.9 15.0 19.0 26.0 25.0 25.0 25.0 0.8 0.8 1.0 7.5 7.5 10.0 4.4 4.4 4.5 12.0 15.5 21.5 7.9 8.0 8.4 15.0 19.0 26.0 25.0 25.0 25.0 0.8 0.8 1.0 7.5 10.0 6.7 6.9 15.5 21.5 11.0 11.4 20.5 28.5 25.0 25.0 0.8 1.0 Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 46 Leaded varistors B722* StandarD series Reliability data Test Test methods/conditions Requirement Varistor voltage The voltage between two terminals with To meet the specified value the specified measuring current applied is called VV (1 mADC @ 0.2 ... 2 s). Clamping voltage The maximum voltage between two terminals with the specified standard impulse current (8/20 s) applied. To meet the specified value Endurance at upper category temperature 1000 h at UCT |V/V (1 mA)| 10% Surge current derating, 8/20 s 10 surge currents (8/20 s), unipolar, interval 30 s, amplitude corresponding to derating curve for 10 impulses at 20 s Surge current derating, 2 ms 10 surge currents (2 ms), unipolar, |V/V (1 mA)| 10% interval 120 s, amplitude corresponding (measured in direction of to derating curve for 10 impulses at surge current) 2 ms No visible damage Electric strength IEC 61051-1, test 4.9.2 After having continuously applied the maximum allowable AC voltage at UCT 2 C for 1000 h, the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. Metal balls method, 2500 VRMS, 60 s The varistor is placed in a container holding 1.6 0.2 mm diameter metal balls such that only the terminations of the varistor are protruding. The specified voltage shall be applied between both terminals of the specimen connected together and the electrode inserted between the metal balls. Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 46 |V/V (1 mA)| 10% (measured in direction of surge current) No visible damage No breakdown Leaded varistors B722* StandarD series Test Test methods/conditions Requirement Climatic sequence The specimen shall be subjected to: a) dry heat at UCT, 16 h, IEC 60068-2-2, test Ba b) damp heat, 1st cycle: 55 C, 93% r. H., 24 h, IEC 60068-2-30, test Db c) cold, LCT, 2 h, IEC 60068-2-1, test Aa d) damp heat, additional 5 cycles: 55 C/25 C, 93% r. H., 24 h/cycle, IEC 60068-2-30, test Db. |V/V (1 mA)| 10% Rins 100 M Then the specimen shall be stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. Thereafter, insulation resistance Rins shall be measured at V = 500 V. Rapid change of temperature IEC 60068-2-14, test Na, LCT/UCT, dwell time 30 min, 5 cycles |V/V (1 mA)| 5% No visible damage Damp heat, steady state IEC 60068-2-78, test Ca |V/V (1 mA)| 10% The specimen shall be subjected to Rins 100 M 40 2 C, 90 to 95% r. H. for 56 days without load / with 10% of the maximum continuous DC operating voltage VDC. Then stored at room temperature and normal humidity for 1 to 2 h. Thereafter, the change of VV shall be measured. Thereafter, insulation resistance Rins shall be measured at V = 500 V (insulated varistors only). Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 46 Leaded varistors B722* StandarD series Test Test methods/conditions Solderability IEC 60068-2-20, test Ta, Resistance to soldering heat IEC 60068-2-20, test Tb, method 1A, 260 C, 10 s: Requirement The inspection shall be carried out under adequate method 1 with modified conditions for light with normal eyesight or lead-free solder alloys: 245 C, 3 s: with the assistance of a After dipping the terminals to a depth of magnifier capable of giving approximately 3 mm from the body in a a magnification of 4 to soldering bath of 245 C for 3 s, the 10 times. The dipped terminals shall be visually examined. surface shall be covered with a smooth and bright solder coating with no more than small amounts of scattered imperfections such as pinholes or un-wetted or de-wetted areas. These imperfections shall not be concentrated in one area. |V/V (1 mA)| 5% No visible damage Each lead shall be dipped into a solder bath having a temperature of 260 5 C to a point 2.0 to 2.5 mm from the body of the specimen, be held there for 10 1 s and then be stored at room temperature and normal humidity for 1 to 2 h. The change of VV shall be measured and the specimen shall be visually examined. Tensile strength IEC 60068-2-21, test Ua1 |V/V (1 mA)| 5% After gradually applying the force specified below and keeping the unit fixed for 10 s, the terminal shall be visually examined for any damage. No break of solder joint, no wire break Force for wire diameter: 0.6 mm = 10 N 0.8 mm = 10 N 1.0 mm = 20 N Please read Cautions and warnings and Important notes at the end of this document. Page 20 of 46 Leaded varistors B722* StandarD series Test Test methods/conditions Requirement Vibration IEC 60068-2-6, test Fc, method B4 Frequency range: 10 ... 55 Hz Amplitude: 0.75 mm or 98 m/s2 Duration: 6 h (3 * 2 h) Pulse: sine wave After repeatedly applying a single harmonic vibration according to the table above. The change of VV shall be measured and the specimen shall be visually examined. |V/V (1 mA)| 5% IEC 60068-2-29, test Eb Pulse duration: 6 ms Max. acceleration: 400 m/s2 Number of bumps: 4000 Pulse: half sine IEC 60695-11-5 (needle flame test) |V/V (1 mA)| 5% Bump Fire hazard Severity: vertical 10 s Note: UCT = Upper category temperature LCT = Lower category temperature Rins = Insulation resistance Please read Cautions and warnings and Important notes at the end of this document. Page 21 of 46 No visible damage No visible damage 5 s max. Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S05 ... Please read Cautions and warnings and Important notes at the end of this document. Page 22 of 46 Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S07 ... Please read Cautions and warnings and Important notes at the end of this document. Page 23 of 46 Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S10 ... Please read Cautions and warnings and Important notes at the end of this document. Page 24 of 46 Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S14 ... Please read Cautions and warnings and Important notes at the end of this document. Page 25 of 46 Leaded varistors B722* StandarD series v/i characteristics v = f (i) - for explanation of the characteristics refer to "General technical information", 1.6.3 A = Leakage current, B = Protection level } for worst-case varistor tolerances SIOV-S20 ... Please read Cautions and warnings and Important notes at the end of this document. Page 26 of 46 Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S05K11 ... K40 SIOV-S05K50 ... K460 Please read Cautions and warnings and Important notes at the end of this document. Page 27 of 46 Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S07K11 ... K40 SIOV-S07K50 ... K460 Please read Cautions and warnings and Important notes at the end of this document. Page 28 of 46 Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S10K11 ... K40 SIOV-S10K50 ... K320 Please read Cautions and warnings and Important notes at the end of this document. Page 29 of 46 Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S10K385 ... K680 SIOV-S14K11 ... K40 Please read Cautions and warnings and Important notes at the end of this document. Page 30 of 46 Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S14K50 ... K320 SIOV-S14K385 ... K1000 Please read Cautions and warnings and Important notes at the end of this document. Page 31 of 46 Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S20K11 ... K40 SIOV-S20K50 ... K115 Please read Cautions and warnings and Important notes at the end of this document. Page 32 of 46 Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S20K130 ... K320 SIOV-S20K385 ... K460 Please read Cautions and warnings and Important notes at the end of this document. Page 33 of 46 Leaded varistors B722* StandarD series Derating curves Maximum surge current imax = f (tr, pulse train) For explanation of the derating curves refer to "General technical information", section 1.8.1 SIOV-S20K510 ... K1000 Please read Cautions and warnings and Important notes at the end of this document. Page 34 of 46 Leaded varistors B722* StandarD series Taping, packaging and lead configuration 1 EPCOS ordering code system For leaded varistors B722 10 S 2 271 K Monolithic varistor Nominal disc diameter Design: S = Leaded varistor T = ThermoFuse F = Fail-safe varistor Q = EnergetiQ Series: 0 = StandarD 1 = Automotive 2 = AdvanceD 3 = SuperioR 4 = SuperioR Max. AC operating voltage: 271 = 27 101 = 275 VAC 140 = 14 100 = 14 VAC 141 = 14 101 = 140 VAC Tolerance of varistor voltage: K = 10% J = 5% S = Special tolerance Lead configuration: 1 = Straight leads 2 thru 5 = Kinked form Packaging: 0 = Bulk, 1 thru 7 = Taping style Internal coding: 1 = Standard Please read Cautions and warnings and Important notes at the end of this document. Page 35 of 46 1 0 1 Leaded varistors B722* StandarD series 2 Taping and packaging of leaded varistors Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = 7.5 and 10 the taping mode is based on this standard. 2.1 Taping in accordance with IEC 60286-2 for lead spacing 5.0 mm 2.2 Taping based on IEC 60286-2 for lead spacing 7.5 and 10 mm Please read Cautions and warnings and Important notes at the end of this document. Page 36 of 46 Leaded varistors B722* StandarD series 2.3 Tape dimensions (in mm) Symbol w = 5.0 Tolerance th = 7.5 Tolerance = 10.0 Tolerance max. max. max. max. max. max. d P0 0.6 12.7 0.05 0.3 0.8 12.71) P1 F h p 3.85 5.0 0 0 0.7 +0.6/0.1 2.0 1.3 8.95 0.8 7.5 0.8 depends on s 0 2.0 W W0 18.0 5.5 0.5 min. 18.0 11.0 0.5 min. 18.0 11.0 0.5 min. W1 W2 H H0 9.0 3.0 18.0 16.0 (18.0) 32.2 4.0 0.9 11.0 4.0 0.5 max. +2.0/0 0.5 9.0 3.0 18.0 16.0 (18.0) 45.0 4.0 0.9 11.0 +0.75/0.5 max. +2.0/0 0.5 9.0 3.0 18.0 16.0 +0.75/0.5 max. +2.0/0 0.5 max. 0.2 max. max. 45.0 4.0 0.9 11.0 max. 0.2 max. max. H1 D0 t L l max. 0.2 max. max. max. 0.05 0.3 1.0 12.7 7.7 0.8 10.0 0.8 depends on s 0 2.0 1) Taping with P0 = 15.0 mm upon request 2) Applies only to uncrimped types 3) Applies only to crimped types (H0 = 18 upon request) Please read Cautions and warnings and Important notes at the end of this document. 0.05 0.3 Page 37 of 46 Remarks see tables in each series under "Dimensions" 1 mm/20 sprocket holes measured at top of component body Peel-off force > 5 N 2) 3) without lead Leaded varistors B722* StandarD series 2.4 Taping mode Example: B72210S0271K1 5 1 | Digit 14 Digit 14 Taping Reel type mode Seating plane height H0 for crimped types mm 0 Bulk 1 G I 16 2 G2 I 18 3 G3 II 16 4 G4 II 18 5 G5 III 16 6 GA Ammo pack 16 7 G2A Ammo pack 18 Internal coding for special taping G6 III 18 G10 II 16 G11 II 18 G10A Ammo pack 16 G11A Ammo pack 18 Please read Cautions and warnings and Important notes at the end of this document. Page 38 of 46 Seating plane height H for uncrimped types mm 18 18 18 18 Pitch distance P0 mm 12.7 12.7 12.7 12.7 12.7 12.7 12.7 18 18 12.7 15.0 15.0 15.0 15.0 Leaded varistors B722* StandarD series 2.5 Reel dimension Dimensions (in mm) Reel type I II III d 360 max. 360 max. 500 max. f 31 1 31 1 23 1 n approx. 45 approx. 55 approx. 59 w 54 max. 64 max. 72 max. If reel type III is not compatible with insertion equipment because of its large diameter, nominal disk diameter 10 mm and 14 mm can be supplied on reel II upon request (taping mode G3). 2.6 Ammo pack dimensions Please read Cautions and warnings and Important notes at the end of this document. Page 39 of 46 Leaded varistors B722* StandarD series 3 Lead configuration Straight leads are standard for disk varistors. Other lead configurations as crimp style or customer-specific lead wire length according to 3.1, 3.2, 3.3 and 3.4 are optional. Crimped leads (non-standard) are differently crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers (S, S2 through S5) as shown in the dimensional drawings below. The crimp styles of the individual types can be seen from the type designation in the ordering tables. 3.1 Crimp style mode Example: B72210S0271K 5 01 | Digit 13 Digit 13 of ordering code Crimp style Figure 1 Standard, straight leads 1 2 S2 2 3 S3 3 4 S4 4 5 S5 5 6 Available upon request Internal coding 3.2 Standard leads and non-standard crimp styles Standard, straight leads Non-standard, crimp style S2 Non-standard, crimp style S3 Figure 1 Figure 2 Figure 3 Please read Cautions and warnings and Important notes at the end of this document. Page 40 of 46 Leaded varistors B722* StandarD series Non-standard, crimp style S4 Non-standard, crimp style S5 Figure 4 Figure 5 3.3 Component height (hmax) for crimped versions (non-standard) Due to technical reasons the component height (hmax) increases if a crimp is added. The maximum height of the crimped component can be found in the table below. Nominal diameter mm 5 5 VRMS V 11 ... 175 210 ... 460 Crimp style S2 S3 5.0 5.0 hmax mm 10.0 10.0 11 ... 175 210 ... 460 S2 S3 5.0 5.0 12.0 12.0 10 10 10 10 10 10 10 11 ... 300 320 ... 460 510 Automotive Automotive (D1 types) 11 ... 175 210 ... 460 S5 S3/S5 S3/S5 S5 S5 S4 S3 7.5 7.5 7.5 7.5 7.5 5.0 5.0 15.5 16.5 17.5 17.0 16.0 16.5 16.5 14 14 14 14 14 11 ... 300 320 ... 460 510 Automotive Automotive (D1 types) S5 S3/S5 S3/S5 S5 S5 7.5 7.5 7.5 7.5 7.5 20.0 20.0 21.5 21.0 20.0 20 20 11 ... 320 385 ... 510 S5 S5 10.0 10.0 27.0 27.5 7 7 Please read Cautions and warnings and Important notes at the end of this document. mm Page 41 of 46 Leaded varistors B722* StandarD series 3.4 Trimmed leads (non-standard) Varistors with cut leads available upon request. Lead length tolerances: Straight leads Crimped leads Minimum lead length +/1.0 mm +/0.8 mm 3.5 mm Figure 6 Please read Cautions and warnings and Important notes at the end of this document. Page 42 of 46 Leaded varistors B722* StandarD series Cautions and warnings General 1. EPCOS metal oxide varistors are designed for specific applications and should not be used for purposes not identified in our specifications, application notes and data books unless otherwise agreed with EPCOS during the design-in-phase. 2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should be evaluated taking into consideration worst-case conditions. 3. For applications of SIOVs in line-to-ground circuits based on various international and local standards there are restrictions existing or additional safety measures required. Storage 1. Store SIOVs only in original packaging. Do not open the package before storage. 2. Storage conditions in original packaging: Storage temperature: 25 C ... +45 C, Relative humidity: <75% annual average, <95% on maximum 30 days a year. Dew precipitation: is to be avoided. 3. Avoid contamination of an SIOV's during storage, handling and processing. 4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term operation (examples given under operation precautions). 5. The SIOV type series should be soldered within the time specified: SIOV-S, -Q, -LS, -B, -SFS 24 months ETFV 12 months. Handling 1. SIOVs must not be dropped. 2. Components must not be touched with bare hands. Gloves are recommended. 3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the sharp edge of SIOV electrodes. Soldering (where applicable) 1. Use rosin-type flux or non-activated flux. 2. Insufficient preheating may cause ceramic cracks. 3. Rapid cooling by dipping in solvent is not recommended. 4. Complete removal of flux is recommended. Please read Cautions and warnings and Important notes at the end of this document. Page 43 of 46 Leaded varistors B722* StandarD series Mounting 1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic that will degrade the component's electrical characteristics. 2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this reason SIOVs should be physically shielded from adjacent components. Operation 1. Use SIOVs only within the specified temperature operating range. 2. Use SIOVs only within the specified voltage and current ranges. 3. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric conditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions.Contact with any liquids and solvents should be prevented. Please read Cautions and warnings and Important notes at the end of this document. Page 44 of 46 Leaded varistors B722* StandarD series Symbols and terms Symbol Term C Capacitance Ctyp Typical capacitance i Current ic Current at which Vc, max is measured Ileak Leakage current imax Maximum surge current (also termed peak current) Imax Maximum discharge current to IEC 61643-1 Inom Nominal discharge current to IEC 61643-1 LCT Lower category temperature Ltyp Typical inductance Pmax Maximum average power dissipation Rins Insulation resistance Rmin Minimum resistance TA Ambient temperature tr Duration of equivalent rectangular wave UCT Upper category temperature v Voltage Vclamp Clamping voltage vc, max Maximum clamping voltage at specified current ic VDC DC operating voltage Vjump Maximum jump start voltage vmax Maximum voltage Vop Operating voltage VRMS AC operating voltage, root-mean-square value VRMS, op, max Root-mean-square value of max. DC operating voltage incl. ripple current Vsurge Super imposed surge voltage VV Varistor voltage VV Tolerance of varistor voltage WLD Maximum load dump Wmax Maximum energy absorption Lead spacing All dimensions are given in mm. The commas used in numerical values denote decimal points. Please read Cautions and warnings and Important notes at the end of this document. Page 45 of 46 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKK, MKD, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 46 of 46 Leaded Varistors Taping Taping (leaded varistors) All leaded varistors are available on tape. Exception: S10K510 ... K680, S14K510 ... K1000, S20K385 ... K1000. Tape packaging for lead spacing = 5 fully conforms to IEC 60286-2, while for lead spacings = 7,5 and 10 the taping mode is based on this standard. The ordering tables on page 213 ff list disk types available on tape in detail, i. e. with complete type designation and ordering code. Taping mode and, if relevant, crimp style and lead spacing are coded in the type designation. For types not listed please contact EPCOS. Upon request parts with lead spacing = 5 mm are available in Ammopack too. Designation system for taping mode Type designation bulk default = no extra designation Taped, reel type G G2 G3 G4 G5 see page 208 Taped, Ammopack GA G2A Crimp style (if relevant) S S2 S3 S4 S5 Lead spacing (if relevant) R5 R7 see page 212 Lead spacing differs from standard version see page 209 Example SIOV-S10K250GS3R5 SIOV-S10K250 G S3 R5 Taped Reel type I Seating plane height H0 =16 Crimp style 3 Lead spacing 5,0 (differs from LS 7,5 of standard version S10K250) G2A S2 -- Taped Seating plane height H0 =18 Ammopack Crimp style 2 -- Example SIOV-S07K60G2AS2 SIOV-S07K60 206 04/02 Leaded Varistors Taping Taping modes/reel types Taped varistors have the letter "G" appended to the type designation. The different tapes and matching reel types are identified by numbers as shown in the table on page 208. Types with lead spacing = 5, reel diameter 360 mm, have the code letter "G" while types with lead spacing = 7,5 and 10 on 500-mm reels are identified by "G5". Furthermore types with lead spacing = 5 are available in Ammopack, code letters "GA". Versions G2, G3 and G4 are special tapes on 360-mm reels resp. Ammopack: G2 denotes the seating plane height H0 = 18 for crimped versions. Tapes G3 and G4 are available on 360-mm reels in case the 500-mm reels are too big for your insertion machine. Crimp styles Both crimped and straight leads are standard for taped disk varistors. The leads are differently crimped for technical reasons; the individual crimp styles are denoted by consecutive numbers (S, S2 ... S5) as shown in the dimensional drawings on page 212. The crimp styles of the individual types can be seen from the type designation in the ordering tables. Example straight leads: Example crimped leads: S10K250G5 S10K250G5S5 Lead spacing Type series SIOV-S10 is available with two different lead spacings: = 5,0 (wire AE 0,6 mm) = 7,5 (wire AE 0,8 mm) For taped varistors having a different lead spacing from their untaped equivalents, the actual appended to type designation. Example: S10K250GS3R5 The standard lead spacing of series SIOV-S10 is appendix "R5". = 7,5. The version with 207 04/02 is = 5,0 has the Leaded Varistors Taping Assignment of taping mode to reel type Taping mode Reel type G1) G2 G3 G4 G5 GA G2A I I II II III Ammopack Ammopack Seating plane height H0 for crimped types mm 16 18 16 18 16 16 18 Seating plane height H for uncrimped types mm 18 -- 18 -- 18 18 -- Taping modes G2, G3, G4, GA and G2A: delivery upon request. Direction of unreeling Reel Tape Reel dimensions (in mm) Reel type d f n w I II III 360 max. 360 max. 500 max. 31 1 31 1 23 1 approx. 45 approx. 55 approx. 59 54 max. 64 max. 72 max. If reel type III is not compatible with insertion equipment because of its large diameter, type series S10 and S14 can be supplied on reel II upon request (taping mode G3). 1) "1" is omitted. 208 04/02 Leaded Varistors Taping Ammopack dimensions Bamboo sticks, Cardboard folding carton 340 x 226 x 55 mm 226 55 340 Paper adhesive tape, width 50 mm Label Paper adhesive tape, width 50 mm VAR0402-G 209 04/02 Leaded Varistors Taping Taping in accordance with IEC 60286-2 s h h p b p D0 H1 H W W1 B W0 A H0 L W2 H1 F d P0 P1 Direction of unreeling t Section A-B < F = e = 5,0 mm (except S ... R5) VAR0410-X Taping based on IEC 60286-2 s h p b p H1 H H0 W1 W2 H1 F D0 B W0 A d Section A-B P1 t P0 W L h Direction of unreeling < < F = e = 7,5 mm (including S ... R5) F = e = 10 mm (including S ... R5) VAR0395-J 210 04/02 Leaded Varistors Taping Tape dimensions (in mm) Sym= 5,0 bol b s d 0,61) P0 12,7 Tolerance max. max. 0,05 0,3 0,8 12,7 2) P1 F Dh Dp 3,85 5,0 0 0 0,7 + 0,6/- 0,1 2,0 1,3 8,95 0,8 7,5 0,8 depends on s 0 2,0 W W0 18,0 5,5 0,5 min. 18,0 11,0 0,5 min. 18,0 11,0 0,5 min. W1 W2 H H0 9,0 3,0 18,0 16,0 (18,0) 32,2 4,0 0,9 11,0 4,0 0,5 max. + 2,0/- 0 0,5 9,0 3,0 18,0 16,0 (18,0) 45,0 4,0 0,9 11,0 + 0,75/- 0,5 max. + 2,0/- 0 0,5 9,0 3,0 18,0 16,0 + 0,75/- 0,5 max. + 2,0/- 0 0,5 max. 0,2 max. max. 45,0 4,0 0,9 11,0 max. 0,2 max. max. H1 D0 t L l 1) 2) 3) 4) max. 0,2 max. max. max. = 7,5 Tolerance max. max. 0,05 0,3 = 10,0 Tolerance 1,0 12,7 max. max. 0,05 0,3 7,7 0,8 10,0 0,8 depends on s 0 2,0 SHCV 0,5 Taping with P0 = 15,0 mm upon request Applies only to uncrimped types Applies only to crimped types (H0 = 18 upon request) 211 04/02 Remarks see tables on page 169 ff 1 mm/20 sprocket holes measured at top of component body Peel-off force 5 N 3) 4) without lead Leaded Varistors Taping Standard crimp styles Crimp style S2) b Crimp style S2 Crimp style S3 b b s s h h h s 1) 1) 1) e od od e a od e VAR0411-F 60717 Seating plane according to IECVAR0403-O VAR0411-F VAR0396-R to IEC 1) Seating plane according 1) Seating plane according to IEC 60717 Crimp style S4 s h b 1) e od 1) Seating plane according to IEC 60717 VAR0404-W Crimp style S5 s h b 1) od Type SIOVS05K11 ... 175(E2)S2 S05K210 ... 460(E2)S3 mm 5,0 5,0 hmax mm 10,0 10,0 S07K11 ... 175(E2)S2 S07K210 ... 460(E2)S3 5,0 5,0 12,0 12,0 S10K11 ... 300(E2)S5 S10K320 ... 460(E2)(S3)(S5) S10K510(E2)(S3)(S5) S10 ... AUTOS5 S10 ... AUTOD1S5 S10K11 ... 175(E2)S4R5 S10K210 ... 460(E2)S3R5 7,5 7,5 7,5 7,5 7,5 5,0 5,0 15,5 16,5 17,5 17,0 16,0 16,5 16,5 S14K11 ... 300(E2)S5 S14K320 ... 460(E2)(S3)(S5) S14K510(E2)(S3)(S5) S14 ... AUTOS5 S14 ... AUTOD1S5 7,5 7,5 7,5 7,5 7,5 20,0 20,0 21,5 21,0 20,0 10,0 10,0 27,0 27,5 a S20K11 ... 320(E2)(E3)S5 S20K385 ... 510(E2)S5 e 1) Seating plane according to IEC 60717 VAR0412-N Missing dimensions are shown on page 169 ff. 2) "1" is omitted. 212 04/02 Leaded Varistors Taping Type Ordering code Crimp style Pieces/reel I Type series SIOV-S05, straight leads = 5,0 SIOV-S05K11G B72205S0110K111 SIOV-S05K14G B72205S0140K111 SIOV-S05K17G B72205S0170K111 SIOV-S05K20G B72205S0200K111 SIOV-S05K25G B72205S0250K111 SIOV-S05K30G B72205S0300K111 SIOV-S05K35G B72205S0350K111 SIOV-S05K40G B72205S0400K111 SIOV-S05K50G B72205S0500K111 SIOV-S05K60G B72205S0600K111 SIOV-S05K75G B72205S0750K111 SIOV-S05K95G B72205S0950K111 SIOV-S05K115G B72205S0111K111 SIOV-S05K130G B72205S0131K111 SIOV-S05K140G B72205S0141K111 SIOV-S05K150G B72205S0151K111 SIOV-S05K175G B72205S0171K111 SIOV-S05K230G B72205S0231K111 SIOV-S05K250G B72205S0251K111 SIOV-S05K275G B72205S0271K111 SIOV-S05K300G B72205S0301K111 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 Type series SIOV-S05, crimped leads = 5,0 SIOV-S05K11GS2 B72205S0110K211 SIOV-S05K14GS2 B72205S0140K211 SIOV-S05K17GS2 B72205S0170K211 SIOV-S05K20GS2 B72205S0200K211 SIOV-S05K25GS2 B72205S0250K211 SIOV-S05K30GS2 B72205S0300K211 SIOV-S05K35GS2 B72205S0350K211 SIOV-S05K40GS2 B72205S0400K211 SIOV-S05K50GS2 B72205S0500K211 SIOV-S05K60GS2 B72205S0600K211 SIOV-S05K75GS2 B72205S0750K211 SIOV-S05K95GS2 B72205S0950K211 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 213 04/02 Leaded Varistors Taping Type Ordering code Crimp style Pieces/reel I Type series SIOV-S05, crimped leads = 5,0 (continued) SIOV-S05K115GS2 B72205S0111K211 S2 SIOV-S05K130GS2 B72205S0131K211 S2 SIOV-S05K140GS2 B72205S0141K211 S2 SIOV-S05K150GS2 B72205S0151K211 S2 SIOV-S05K175GS2 B72205S0171K211 S2 SIOV-S05K230GS3 B72205S0231K311 S3 SIOV-S05K250GS3 B72205S0251K311 S3 SIOV-S05K275GS3 B72205S0271K311 S3 SIOV-S05K300GS3 B72205S0301K311 S3 SIOV-S05K385GS3 B72205S0381K311 S3 SIOV-S05K420GS3 B72205S0421K311 S3 SIOV-S05K440GS3 B72205S0441K311 S3 SIOV-S05K460GS3 B72205S0461K311 S3 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 1000 Type series SIOV-S07, straight leads = 5,0 SIOV-S07K11G B72207S0110K111 SIOV-S07K14G B72207S0140K111 SIOV-S07K17G B72207S0170K111 SIOV-S07K20G B72207S0200K111 SIOV-S07K25G B72207S0250K111 SIOV-S07K30G B72207S0300K111 SIOV-S07K35G B72207S0350K111 SIOV-S07K40G B72207S0400K111 SIOV-S07K50G B72207S0500K111 SIOV-S07K60G B72207S0600K111 SIOV-S07K75G B72207S0750K111 SIOV-S07K95G B72207S0950K111 SIOV-S07K115G B72207S0111K111 SIOV-S07K130G B72207S0131K111 SIOV-S07K140G B72207S0141K111 SIOV-S07K150G B72207S0151K111 SIOV-S07K175G B72207S0171K111 SIOV-S07K230G B72207S0231K111 SIOV-S07K250G B72207S0251K111 SIOV-S07K275G B72207S0271K111 SIOV-S07K300G B72207S0301K111 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 214 04/02 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Leaded Varistors Taping Type Ordering code Type series SIOV-S07, crimped leads = 5,0 SIOV-S07K11GS2 B72207S0110K211 SIOV-S07K14GS2 B72207S0140K211 SIOV-S07K17GS2 B72207S0170K211 SIOV-S07K20GS2 B72207S0200K211 SIOV-S07K25GS2 B72207S0250K211 SIOV-S07K30GS2 B72207S0300K211 SIOV-S07K35GS2 B72207S0350K211 SIOV-S07K40GS2 B72207S0400K211 SIOV-S07K50GS2 B72207S0500K211 SIOV-S07K60GS2 B72207S0600K211 SIOV-S07S60AGS2 B72207S0600S212 SIOVS007K75GS2 B72207S0750K211 SIOVS007K95GS2 B72207S0950K211 SIOVS007S95AGS2 B72207S0950S212 SIOV-S07K115GS2 B72207S0111K211 SIOV-S07K130GS2 B72207S0131K211 SIOV-S07K140GS2 B72207S0141K211 SIOV-S07K150GS2 B72207S0151K211 SIOV-S07K175GS2 B72207S0171K211 SIOV-S07K230GS3 B72207S0231K311 SIOV-S07K250GS3 B72207S0251K311 SIOV-S07K275GS3 B72207S0271K311 SIOV-S07K300GS3 B72207S0301K311 SIOV-S07K385GS3 B72207S0381K311 SIOV-S07K420GS3 B72207S0421K311 SIOV-S07K440GS3 B72207S0441K311 SIOV-S07K460GS3 B72207S0461K311 215 04/02 Crimp style Pieces/reel I S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S2 S3 S3 S3 S3 S3 S3 S3 S3 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 1000 1000 1000 1000 Leaded Varistors Taping Type Ordering code Crimp style Pieces/reel III Type series SIOV-S10, straight leads = 7,5 SIOV-S10K11G5 B72210S0110K151 SIOV-S10K14G5 B72210S0140K151 SIOV-S10K17G5 B72210S0170K151 SIOV-S10K20G5 B72210S0200K151 SIOV-S10K25G5 B72210S0250K151 SIOV-S10K30G5 B72210S0300K151 SIOV-S10K35G5 B72210S0350K151 SIOV-S10K40G5 B72210S0400K151 SIOV-S10K50G5 B72210S0500K151 SIOV-S10K60G5 B72210S0600K151 SIOV-S10K75G5 B72210S0750K151 SIOV-S10K95G5 B72210S0950K151 SIOV-S10K115G5 B72210S0111K151 SIOV-S10K130G5 B72210S0131K151 SIOV-S10K140G5 B72210S0141K151 SIOV-S10K150G5 B72210S0151K151 SIOV-S10K175G5 B72210S0171K151 SIOV-S10K230G5 B72210S0231K151 SIOV-S10K250G5 B72210S0251K151 SIOV-S10K275G5 B72210S0271K151 SIOV-S10K300G5 B72210S0301K151 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 Type Crimp style Pieces/reel I S4 S4 S4 S4 S4 S4 S4 S4 S4 S4 S4 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Ordering code Type series SIOV-S10, crimped leads = 5,0 SIOV-S10K11GS4R5 B72210S0110K412 SIOV-S10K14GS4R5 B72210S0140K412 SIOV-S10K17GS4R5 B72210S0170K412 SIOV-S10K20GS4R5 B72210S0200K412 SIOV-S10K25GS4R5 B72210S0250K412 SIOV-S10K30GS4R5 B72210S0300K412 SIOV-S10K35GS4R5 B72210S0350K412 SIOV-S10K40GS4R5 B72210S0400K412 SIOV-S10K50GS4R5 B72210S0500K412 SIOV-S10K75GS4R5 B72210S0750K412 SIOV-S10K95GS4R5 B72210S0950K412 216 04/02 Leaded Varistors Taping Type Ordering code Crimp style Pieces/reel I Type series SIOV-S10, crimped leads = 5,0 (continued) SIOV-S10K115GS4R5 B72210S0111K412 S4 SIOV-S10K130GS4R5 B72210S0131K412 S4 SIOV-S10K140GS4R5 B72210S0141K412 S4 SIOV-S10K150GS4R5 B72210S0151K412 S4 SIOV-S10K175GS4R5 B72210S0171K412 S4 SIOV-S10K230GS3R5 B72210S0231K312 S3 SIOV-S10K250GS3R5 B72210S0251K312 S3 SIOV-S10K275GS3R5 B72210S0271K312 S3 SIOV-S10K300GS3R5 B72210S0301K312 S3 1500 1500 1500 1500 1500 1500 1500 1000 1000 Type Crimp style Pieces/reel III S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 Ordering code Type series SIOV-S10, crimped leads = 7,5 SIOV-S10K11G5S5 B72210S0110K551 SIOV-S10K14G5S5 B72210S0140K551 SIOV-S10K17G5S5 B72210S0170K551 SIOV-S10K20G5S5 B72210S0200K551 SIOV-S10K25G5S5 B72210S0250K551 SIOV-S10K30G5S5 B72210S0300K551 SIOV-S10K35G5S5 B72210S0350K551 SIOV-S10K40G5S5 B72210S0400K551 SIOV-S10K50G5S5 B72210S0500K551 SIOV-S10K60G5S5 B72210S0600K551 SIOV-S10K75G5S5 B72210S0750K551 SIOV-S10K95G5S5 B72210S0950K551 SIOV-S10K115G5S5 B72210S0111K551 SIOV-S10K130G5S5 B72210S0131K551 SIOV-S10K140G5S5 B72210S0141K551 SIOV-S10K150G5S5 B72210S0151K551 SIOV-S10K175G5S5 B72210S0171K551 SIOV-S10K230G5S5 B72210S0231K551 SIOV-S10K250G5S5 B72210S0251K551 SIOV-S10K275G5S5 B72210S0271K551 SIOV-S10K300G5S5 B72210S0301K551 SIOV-S10K320 ... 460G.S. upon request 217 04/02 Leaded Varistors Taping Type Ordering code Crimp style Pieces/reel III Type series SIOV-S14, straight leads = 7,5 SIOV-S14K11G5 B72214S0110K151 SIOV-S14K14G5 B72214S0140K151 SIOV-S14K17G5 B72214S0170K151 SIOV-S14K20G5 B72214S0200K151 SIOV-S14K25G5 B72214S0250K151 SIOV-S14K30G5 B72214S0300K151 SIOV-S14K35G5 B72214S0350K151 SIOV-S14K40G5 B72214S0400K151 SIOV-S14K50G5 B72214S0500K151 SIOV-S14K60G5 B72214S0600K151 SIOV-S14K75G5 B72214S0750K151 SIOV-S14K95G5 B72214S0950K151 SIOV-S14K115G5 B72214S0111K151 SIOV-S14K130G5 B72214S0131K151 SIOV-S14K140G5 B72214S0141K151 SIOV-S14K150G5 B72214S0151K151 SIOV-S14K175G5 B72214S0171K151 SIOV-S14K230G5 B72214S0231K151 SIOV-S14K250G5 B72214S0251K151 SIOV-S14K275G5 B72214S0271K151 SIOV-S14K300G5 B72214S0301K151 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1000 1000 1000 1000 Type series SIOV-S14, crimped leads = 7,5 SIOV-S14K11G5S5 B72214S0110K551 SIOV-S14K14G5S5 B72214S0140K551 SIOV-S14K17G5S5 B72214S0170K551 SIOV-S14K20G5S5 B72214S0200K551 SIOV-S14K25G5S5 B72214S0250K551 SIOV-S14K30G5S5 B72214S0300K551 SIOV-S14K35G5S5 B72214S0350K551 SIOV-S14K40G5S5 B72214S0400K551 SIOV-S14K50G5S5 B72214S0500K551 SIOV-S14K60G5S5 B72214S0600K551 SIOV-S14K75G5S5 B72214S0750K551 SIOV-S14K95G5S5 B72214S0950K551 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 S5 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 218 04/02 Leaded Varistors Taping / Lock-In Crimps Lock-in crimps Type Ordering code Crimp style Pieces/reel III Type series SIOV-S14, crimped leads = 7,5 (continued) SIOV-S14K115G5S5 B72214S0111K551 S5 SIOV-S14K130G5S5 B72214S0131K551 S5 SIOV-S14K140G5S5 B72214S0141K551 S5 SIOV-S14K150G5S5 B72214S0151K551 S5 SIOV-S14K175G5S5 B72214S0171K551 S5 SIOV-S14K230G5S5 B72214S0231K551 S5 SIOV-S14K250G5S5 B72214S0251K551 S5 SIOV-S14K275G5S5 B72214S0271K551 S5 SIOV-S14K300G5S5 B72214S0301K551 S5 1500 1500 1500 1500 1500 1000 1000 1000 1000 SIOV-S14K320 ... 460G.(S.) upon request SIOV-S20K11 ... 320G.(S.) upon request SIOV-S..K ... E2G.(S.) SIOV-S20K ... E3G.(S.) SIOV-Q14K ... G.(S.) SIOV-Q20K ... G.(S.) taping according to the versions of the standard program upon request Lock-in crimps These crimp styles provide automatic lock-in function on the printed circuit board, for facilitated assembly. Crimp style S9 (for lead spacing = 5): o1,00,02 1) a*) 3,10,5 Layout recommendation e 1) Seating plane in according to IEC 60717 VAR0413-V 5,0 0,2 mm *)*) Set-off Versatz"a""a"depending abhanglgon voltage ratings von der Spannungsklasse VAR0421-M Recommended PCB thickness: 1,5 + 0,2 mm Example: SIOV-S07K275S9 219 04/02 Leaded Varistors Taping / Lock-In Crimps / Trimmed Leads Trimmed leads Crimp style S11 (for lead spacing = 7,5): Layout recommendation 1) e 7,5 nom. 1) Seating plane according to IEC 60717 VAR0414-D VAR0429-Y Recommended PCB thickness: 1,6 +/- 0,14 mm Copper _0 1,20 +0,10 1,350,05 0,40,15 1,600,14 1,500,10 VAR0549-S Recommended hole pattern Example: SIOV-S14K275S11 Trimmed leads Varistors with cut leads available upon request. Lead length tolerances: Straight leads Crimped leads Min. lead length Examples: +/- 1,0 mm +/- 0,8 mm +/- 3,5 mm SIOV-S07K275M4,5: straight leads, lead length 4,5 1,0 mm SIOV-S14K275S5M4,5: crimpstyle 5, lead length 4,5 0,8 mm 220 04/02 Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach 80 17 09, 81617 Munchen, DEUTSCHLAND ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Vervielfaltigung, Veroffentlichung, Verbreitung und Verwertung dieser Broschure und ihres Inhalts ohne ausdruckliche Genehmigung der EPCOS AG nicht gestattet. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen fur Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschure ersetzt die vorige Ausgabe. Fragen uber Technik, Preise und Liefermoglichkeiten richten Sie bitte an den Ihnen nachstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente konnen aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskunfte daruber bitten wir unter Angabe des betreffenden Typs ebenfalls uber die zustandige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY ++49 89 636 09, FAX (0 89) 636-2 26 89 ( EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.