PAGE . 1
June 2,2011-REV.03
ES1AW SERIES
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Superfast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Fla mmability Cla ssification 94V-O
In compliance with EU RoHS 2002/95/EC directives
MECHANICAL DA TA
Ca se: JEDEC DO-214AC molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
Weight: 0.0023 ounce, 0.0679 gram
SURF ACE MOUNT SUPERF AST RECTIFIER
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
NOTES:
1.Reverse Recovery Tset Conditions:IF=0.5A,IR=1.0A,Irr=0.25A
2.Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
3.8.0mm2( .013mm thick ) land areas.
50 to 600 Volts 1.0 Ampere
CURRENT
VOLTAGE
PARAMETER SYMBOL ES1AW ES1BW ES1CW ES1DW ES1EW ES1GW ES1JW UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 150 200 300 400 600 V
Maximum RMS Voltage V
RMS
35 70 105 140 210 280 420 V
Maximum DC Blocking Voltage V
DC
50 100 150 200 300 400 600 V
Maximum Average Forward Current at T
L
=105
O
CI
F(AV)
1.0 A
Peak Forward Surge Current : 8.3ms single half sine-wave
superimposed on rated load (JEDEC method) I
FSM
30 A
Maximum Forward Voltage at 1.0A V
F
0.95 1.25 1.7 V
Maximum DC Reverse Current at Rated DC
Blocking Voltage T
J
= 25
O
C
T
J
=100
O
CI
R
1.0
10 μA
Maximum Reverse Recovery Time (Note 1) t
rr
35 ns
Typical Junction Capacitance (Note 2) C
J
7.0 pF
Typical Thermal Resistance (Note 3) R
θJL
35
O
C / W
Operating Junction and Storage Temperature Range T
J
,T
STG
-55 to +150
O
C
PAGE . 2
ES1AW SERIES
Fig.3 Typical Junction Capacitance
0
5
10
15
20
25
30
35
40
0 10203040
VR, Reverse Bias Voltage (V)
CJ, Junction
Capacitance (pF)
Fig.4 Forward Current Derating Curve
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0 25 50 75 100 125 150
TL, Lead Temperature (°C)
IF, Forward Current (A )
0.1
1
10
0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2
VF, Forward Voltage (V)
IF, Forward Current (A )
TJ=25°C
300-600V
50-200V
Fig.2 Typical Forward Characteristics
0.1
1
10
0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2
VF, Forward Voltage (V)
IF, Forward Current (A )
50-200V
300-600V
TJ=150°C
0.001
0.01
0.1
1
10
20 40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
TJ = 125°C
TJ = 25°C
Fig.1 Typical Forward Characteristics
IR, Leakage Current (uA )
Fig.5 Typical Reverse Characteristics
June 2,2011-REV.03
PAGE . 3
MOUNTING P AD LA YOUT
• Packing information
T/R - 7.5K per 13" plastic Reel
T/R - 1.8Kper 7” plastic Reel
ORDER INFORMA TION
LEGAL ST ATEMENT
Copyright PanJit International, Inc 2011
The information presented in this document is believed to be accurate and reliable. The specifications and information herein
are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit
does not convey any license under its patent rights or rights of others.
ES1AW SERIES
June 2,2011-REV.03