• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
1
Cascadable Amplifier
10 to 250 MHz
Rev. V4
A70-2 / SMA70-2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Parameter Units Typical Guaranteed
25ºC 0º to 50ºC -54º to +85ºC*
Frequency MHz 10-300 10-250 10-250
Small Signal Gain (min) dB 8.0 7.0 6.5
Gain Flatness (max) dB ±0.2 ±0.5 ±0.7
Reverse Isolation dB 11
Noise Figure (max) dB 2.2 2.7 3.2
Power Output
@ 1 dB comp. (min) dBm 19.0 18.0 17.5
IP3 dBm +38
IP2 dBm +49
Second Order Harmonic IP dBm +54
VSWR Input / Output (max) 1.9:1 / 1.9:1 2.1:1 / 2.1:1 2.3:1 / 2.3:1
DC Current @ 15 Volts (max) mA 25 27 29
Features
• LOW NOISE: 2.2 dB (TYP.)
• HIGH OUTPUT POWER: +19 dBm (TYP.)
• HIGH THIRD ORDER I.P.: +38 dBm (TYP.)
• LOW DC CURRENT: 25 mA (TYP.) AT +15 Vdc
Description
The A70-2 RF amplifier is a discrete hybrid design, which uses
thin film manufacturing processes for accurate performance and
high reliability.
This single stage bipolar transistor feedback amplifier design
displays impressive performance over a broadband frequency
range. Use of an impedance transformer offers the benefit of
high dynamic range and high efficiency.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available
Product Image
Ordering Information
Part Number Package
A70-2 TO-8
SMA70-2 Surface Mount
CA70-2 ** SMA Connectorized
Absolute Maximum Ratings
Parameter Absolute
Maximum
Storage Temperature -62ºC to +125ºC
Case Temperature +125ºC
DC Voltage +17 V
Continuous Input Power 13 dBm
Short Term Input power
(1 minute max.) 17 mW
Peak Power (3 µsec max.) 0.5 W
“S” Series Burn-In
Temperature (case) +125ºC
Thermal Data: VCC = +15 VDC
Parameter Rating
Thermal Resistance θjc 130ºC/W
Transistor Power Dissipation Pd 0.069 W
Junction Temperature Rise
Above Case Tjc 9ºC
* Over temperature performance limits for part number CA70-2, guaranteed from 0oC to +50oC only.
** The connectorized version is not RoHs compliant.