PDS3200 Green 3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER PowerDI5 Features Mechanical Data Case: PowerDI 5 Case Material: Molded Plastic, "Green" Molding Compound; UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Annealed over Copper Leadframe; Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 0.096 grams (Approximate) Guard Ring Die Construction for Transient Protection Low Forward Voltage Drop Very Low Leakage Current Highly Stable Oxide Passivated Junction High Forward Surge Current Capability Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) (R) PowerDI5 Bottom View Top View Ordering Information (Note 5) Part Number PDS3200-13 PDS3200Q-13 Notes: Qualification Commercial Automotive Case PowerDI5 PowerDI5 Packaging 5,000/Tape & Reel 5,000/Tape & Reel 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to https://www.diodes.com/quality/. 5. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/. Marking Information PowerDI5 S3200 = Product Type Marking Code = Manufacturer's Code Marking YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 18 for 2018) WW = Week Code (01 to 53) K = Factory Designator PowerDI is a registered trademark of Diodes Incorporated. PDS3200 Document number: DS30470 Rev. 20- 2 1 of 5 www.diodes.com April 2018 (c) Diodes Incorporated PDS3200 Maximum Ratings (@TA = +25C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VR VR(RMS) IO Value Unit 200 V 141 3 V A IFSM 180 A Thermal Characteristics Characteristic Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 6) TA = +25C Thermal Resistance Junction to Ambient Air (Note 7) TA = +25C Thermal Resistance Junction to Ambient Air (Note 8) TA = +25C Operating Temperature Range Storage Temperature Range Symbol RJS RJA RJA RJA TJ TSTG Typ 75 60 45 Max 2.0 -65 to +150 -65 to +175 Unit C/W C/W C/W C/W C C Electrical Characteristics (@TA = +25C, unless otherwise specified.) Characteristic Reverse Breakdown Voltage (Note 9) Symbol V(BR)R Min 200 Typ Max Unit V Forward Voltage VF 0.75 0.59 0.82 0.66 0.78 0.64 0.88 0.71 V Reverse Leakage Current (Note 9) IR 1 0.8 10 4.5 A mA Notes: Test Condition IR = 10A IF = 3A, TS = +25C IF = 3A, TS = +125C IF = 6A, TS = +25C IF = 6A, TS = +125C TS = +25C, VR = 200V TS = +125C, VR = 200V 6. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/package-outlines.html. 7. Polymide PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/package-outlines.html. 8. Polymide PCB, 2oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. 9. Short duration pulse test used to minimize self-heating effect. )A 100 ( T N 10 E R R TJ = 150C U C 1 D R A T J = 125C W 0.1 R O F TJ = 85C S 0.01 U O E N TJ = 25C A 0.001 T N A T T J = -65C S 0.0001 N I ,F I 0.00001 0.8 0.4 0.6 1.0 1.2 0.2 0 VF , INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2 Typical Forward Characteristics IF, INSTANTANEOUS FORWARD CURRENT (A) PD, POWER DISSIPATION (W) 5 4 3 2 1 0 0 6 3 9 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 1 Forward Power Dissipation PDS3200 Document number: DS30470 Rev. 20- 2 2 of 5 www.diodes.com April 2018 (c) Diodes Incorporated IR, INSTANTANEOUS REVERSE CURRENT (mA) IR, INSTANTANEOUS REVERSE CURRENT (A) PDS3200 1 0.1 0.01 0.001 10 1 0.1 0.01 0.001 120 160 40 200 0 80 V R, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3 Typical Reverse Characteristics 0 3.75 f = 1MHz 700 CT, TOTAL CAPACITANCE (pF) IF(AV), AVERAGE FORWARD CURRENT (A) 800 600 500 400 300 200 100 0 0 15 20 30 35 10 25 40 VR, DC REVERSE VOLTAGE (V) Figure 5 Typical Capacitance vs. Reverse Voltage TA, DERATED AMBIENT TEMPERATURE (C) 120 160 40 200 80 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 4 Typical Reverse Characteristics 5 3.0 Note Note78 2.25 Note 6 5 Note 1.5 0.75 0 40 60 80 100 120 140 160 180 C)) TA, AMBIENT TEMPERATURE ( ( Figure 6 Forward Current Derating Curve 20 200 180 Note 6 5 Note 160 140 120 100 80 60 40 20 0 0 50 150 200 100 VR, DC REVERSE VOLTAGE (V) Figure 7 Operating Temperature Derating PDS3200 Document number: DS30470 Rev. 20- 2 3 of 5 www.diodes.com April 2018 (c) Diodes Incorporated PDS3200 Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. PowerDI5 E1 A1 E1/2 e 10 1 b2 D 2X b1 E/2 A 5 E 1 A2 10 1 5 1 E2 L1 L1 W PowerDI5 Dim Min Max Typ A 1.05 1.15 1.10 A1 0.00 0.05 -A2 0.33 0.43 0.381 b1 0.80 0.99 0.89 b2 1.70 1.88 1.78 D 3.90 4.05 3.966 D2 --3.054 E 6.40 6.60 6.51 e --1.84 E1 5.30 5.45 5.37 E2 --3.549 L 0.75 0.95 0.85 L1 0.50 0.65 0.57 W 1.10 1.41 1.255 All Dimensions in mm D2 L L Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. PowerDI5 X1 X2 C Y1 Y X Dimensions C G X X1 X2 Y Y1 Value (in mm) 1.840 0.852 1.400 4.860 1.310 1.390 3.360 G PDS3200 Document number: DS30470 Rev. 20- 2 4 of 5 www.diodes.com April 2018 (c) Diodes Incorporated PDS3200 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2018, Diodes Incorporated www.diodes.com PDS3200 Document number: DS30470 Rev. 20- 2 5 of 5 www.diodes.com April 2018 (c) Diodes Incorporated