PDS3200
Document number: DS30470 Rev. 20- 2
1 of 5
www.diodes.com
April 2018
© Diodes Incorporated
PDS3200
3A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
PowerDI5
Features
Guard Ring Die Construction for Transient Protection
Low Forward Voltage Drop
Very Low Leakage Current
Highly Stable Oxide Passivated Junction
High Forward Surge Current Capability
Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
PPAP Capable (Note 4)
Mechanical Data
Case: PowerDI®5
Case Material: Molded Plastic, “Green” Molding Compound;
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin Annealed over Copper Leadframe;
Solderable per MIL-STD-202, Method 208
Polarity: See Diagram
Weight: 0.096 grams (Approximate)
Ordering Information (Note 5)
Part Number
Qualification
Case
Packaging
PDS3200-13
Commercial
PowerDI5
5,000/Tape & Reel
PDS3200Q-13
Automotive
PowerDI5
5,000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally
the same, except where specified. For more information, please refer to https://www.diodes.com/quality/.
5. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/.
Marking Information
Top View
Bottom View
S3200 = Product Type Marking Code
= Manufacturer’s Code Marking
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 18 for 2018)
WW = Week Code (01 to 53)
K = Factory Designator
Green
PowerDI5
PowerDI5
PowerDI is a registered trademark of Diodes Incorporated.
PDS3200
Document number: DS30470 Rev. 20- 2
2 of 5
www.diodes.com
April 2018
© Diodes Incorporated
PDS3200
Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
200
V
RMS Reverse Voltage
VR(RMS)
141
V
Average Rectified Output Current
IO
3
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated Load
IFSM
180
A
Thermal Characteristics
Characteristic
Symbol
Typ
Max
Unit
Thermal Resistance Junction to Soldering Point
RθJS
2.0
°C/W
Thermal Resistance Junction to Ambient Air (Note 6) TA = +25°C
RθJA
75
°C/W
Thermal Resistance Junction to Ambient Air (Note 7) TA = +25°C
RθJA
60
°C/W
Thermal Resistance Junction to Ambient Air (Note 8) TA = +25°C
RθJA
45
°C/W
Operating Temperature Range
TJ
-65 to +150
°C
Storage Temperature Range
TSTG
-65 to +175
°C
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Symbol
Min
Typ
Max
Unit
Test Condition
Reverse Breakdown Voltage (Note 9)
V(BR)R
200
V
IR = 10µA
Forward Voltage
VF
0.75
0.59
0.82
0.66
0.78
0.64
0.88
0.71
V
IF = 3A, TS = +25°C
IF = 3A, TS = +125°C
IF = 6A, TS = +25°C
IF = 6A, TS = +125°C
Reverse Leakage Current (Note 9)
IR
1
0.8
10
4.5
µA
mA
TS = +25°C, VR = 200V
TS = +125°C, VR = 200V
Notes: 6. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/package-outlines.html.
7. Polymide PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/package-outlines.html.
8. Polymide PCB, 2oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm.
9. Short duration pulse test used to minimize self-heating effect.
0
1
5
4
3
2
0369
P , POWER DISSIPATION (W)
D
I , AVERAGE FORWARD CURRENT (A)
Figure 1 Forward Power Dissipation
F(AV)
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Figure 2 Typical Forward Characteristics
F
I
,
I
N
S
T
A
N
T
A
N
E
O
U
S
F
O
R
W
A
R
D
C
U
R
R
E
N
T
(
A
)
F
0
0.2
0.4
0.6
0.8
1.0
1.2
T = 150C
J
°
T = 125C
J
°
T = 85C
J
°
T = 25C
J
°
T = -65C
J
°
10
1
0.1
0.0001
0.001
0.01
0.00001
100
IF, INSTANTANEOUS FORWARD CURRENT (A)
PDS3200
Document number: DS30470 Rev. 20- 2
3 of 5
www.diodes.com
April 2018
© Diodes Incorporated
PDS3200
040 80 120 160 200
V , INSTANTANEOUS REVERSE VOLTAGE (V)
RFigure 3 Typical Reverse Characteristics
0.001
0.01
0.1
1
I , INSTANTANEOUS REVERSE CURRENT (µA)
R
040 80 120 160 200
V , INSTANTANEOUS REVERSE VOLTAGE (V)
RFigure 4 Typical Reverse Characteristics
I , INSTANTANEOUS REVERSE CURRENT (mA)
R
0.001
0.01
0.1
1
10
040
C , TOTAL CAPACITANCE (pF)
T
V , DC REVERSE VOLTAGE (V)
Figure 5 Typical Capacitance vs. Reverse Voltage
R
0
100
200
300
400
500
600
700
800
510 15 20 25 30 35
f = 1MHz
0
I , AVERAGE FORWARD CURRENT (A)
F(AV)
T , AMBIENT TEMPERATURE (
癈
)
Figure 6 Forward Current Derating Curve
A
0.75
1.5
2.25
3.0
3.75
20 40 60 80 100 120 160140 180
Note 5
Note 7
0
40
20
200
180
160
140
120
100
80
60
050 100 150 200
T , DERATED AMBIENT TEMPERATURE (°C)
A
V , DC REVERSE VOLTAGE (V)
Figure 7 Operating Temperature Derating
R
Note 5
Note 6
Note 8
Note 6
(°C)
PDS3200
Document number: DS30470 Rev. 20- 2
4 of 5
www.diodes.com
April 2018
© Diodes Incorporated
PDS3200
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
PowerDI5
PowerDI5
Dim
Min
Max
Typ
A
1.05
1.15
1.10
A1
0.00
0.05
--
A2
0.33
0.43
0.381
b1
0.80
0.99
0.89
b2
1.70
1.88
1.78
D
3.90
4.05
3.966
D2
--
--
3.054
E
6.40
6.60
6.51
e
--
--
1.84
E1
5.30
5.45
5.37
E2
--
--
3.549
L
0.75
0.95
0.85
L1
0.50
0.65
0.57
W
1.10
1.41
1.255
All Dimensions in mm
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
PowerDI5
Dimensions
Value (in mm)
C
1.840
G
0.852
X
1.400
X1
4.860
X2
1.310
Y
1.390
Y1
3.360
10° ± 1°
10° ± 1°
5° ± 1°
5° ± 1°
E
E/2
E1
E1/2
D
A
A1
L1
W
A2
2X b1
b2
L
D2
E2
L
L1
e
Y
X
CY1
X1
G
X2
PDS3200
Document number: DS30470 Rev. 20- 2
5 of 5
www.diodes.com
April 2018
© Diodes Incorporated
PDS3200
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2018, Diodes Incorporated
www.diodes.com
