LF,LFF,RK26
radial metal film leaded resistors
Absolute
Maximum
Overload
Voltage
Absolute
Maximum
Working
Voltage
Part
Designation
Operating
Temperature
Range
Rated
Ambient
Temperature
Power
Rating
applications and ratings
T.C.R.
(ppm/°C)
Max.
LF1/8
LF1/4
LF1/4L
LF1/2
LFF1/4
0.125W
0.25W
0.5W
0.25W
45.3 - 562k 4.7 - 1M 1 - 1M
10 - 1M 10 - 1M 1 - 1M
10 - 100k ——
10 - 1M 10 - 1M 1 - 1M
C: ±50
D: ±100
L: ±200
C: ±50
D: ±100
L: ±200
C: ±50
D: ±100
L: ±200
C: ±50
D: ±100
200V 400V
+70°C
250V 500V
350V 700V
250V 500V
-55°C
to
+150°C
D±0.5%
E-96 F±1%
E-24,E-96 J±5%
E-24
Resistance Range (Ω)
Derating Curve
environmental applications
% Rated Power
100
80
60
40
20
-60 -40 0 406080100160
70
20
Ambient Temperature
(°C)
0
-55
120
155
-20 140
150
LFF, RK26
LF
Performance Characteristics
1 - 1M
1 - 1M
10 - 100k
1 - 1M
G±2%
E-24
RK26B2E 0.25W
— 100K - 22M 100K - 33M
B: ±350 500V 700V
100K - 33M
-55°C
to
+155°C
Parameter
Resistance
Rapid Change of Temperature
Within specified tolerance
25°C
Requirement ∆R ±(% + 0.05Ω) Test Method
Resistance to Solder Heat 260°C ± 5°C, 10 seconds ± 1 second or 350°C ± 10°C, 3.5 seconds ± 0.5 second
LF: ±0.25%, LFF: ±0.5%, RK26: ±1%
40°C ±2°C, 90-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
Endurance @ 70°C 70°C ±3°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
LF: ±1%, LFF: ±2%, RK26: ±5%
Room temperature +100°C
T.C.R.
Overload (Short Time)
LF, LFF: ±0.5%, RK26: ±1%
LF, LFF: ±0.5%
RK26: ±1%
Within specified T.C.R.
Rated voltage x 2.5 or max. overload voltage for 5 seconds, whichever is less
LF: -55°C (30 minutes)/+25°C (10 minutes), +150°C (30 minutes)/+25°C
(10 minutes), 5 cycles; LFF, RK26: -55°C (30 minutes)/+25°C (10 minutes),
+155°C (30 minutes)/+25°C (10 minutes), 5 cycles
LF: ±1%, LFF: ±2%, RK26: ±5%
Moisture Resistance
resistors
110 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/29/10