T4-LDS-0160, Rev. 2 (111541) ©2011 Microsemi Corporation Page 1 of 6
1N5283UR-1 th ru 1N5314UR-1
Available on
commercial
versions
CURRENT REGULATOR DIODES
Qualified per MIL-PRF-19500/463
Qualified Levels:
JAN, JAN TX, JANTXV
and JANS
DESCRIPTION
The popular 1N5283UR-1 t hr u 1N5314UR-1 s er i es of 0.5 watt current r egulators provi des a
sel ection from 0.22 mA to 4.7 mA in standard 10% t ol er anc es. These de vices regulat e cur r ent
over a broad voltage range as a c ounter part offeri ng to Zen er s (t hat regulate volta ge over a
broad cu r r ent rang e). The DO-
213AB package offers a double plug internal bond connection
with a large die element for i ts uniq ue fun ction as a curr ent limiter. Microsemi al so offers
num er ous other Zener prod ucts to meet higher and lower p ower voltage r egulation
applications.
DO-213AB
(MELF, LL41)
Package
Also available in:
DO-7 Package
(axial-leaded)
1N5283-1 to 1N5314-1
Important: For the latest information, visit our w ebsite http://www.microsemi.com.
FEATURES
• JEDEC registered surface mount equivalent of 1N5283 thru 1N5314 series.
• High source im pedance.
• I nter nal meta llurgi cal bond.
• JAN, JANTX, JANTXV, and JANS qualifications are avail able per MIL-PRF-19500/463.
• Chips also available as JANHC and JANKC.
• RoHS compliant versions available (commercial grade only).
APPLICAT IONS / BENE FITS
• Double-plug constr uction.
• Regulates current over a broad operating voltage and temperature range.
• Extensive selection from 0.22 mA to 4.7 mA.
• Standard current tolerances are plus/minus 10%.
• Non-sensitive to ESD.
• Inherently radiation hard as described in Microsemi “MicroNote 050 ”.
MAXIMUM RATINGS
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-65 to +175
oC
Thermal Resistance Junction-to-End Cap @ L = 0 in
RӨJEC
100
oC/W
Thermal Impedance
ZӨJX
25
OC/W
Steady-State Power Dissipation @ TEC = +125
o
C,
(1)
PD
500
mW
Wor king Peak Volta ge
VWM
100
V
Solder Pad Temperature @ 10 s max.
TSP
260
oC
Notes: 1. Derate at 10 mW/°C above +125 oC.
T4-LDS-0160, Rev. 2 (111541) ©2011 Microsemi Corporation Page 2 of 6
1N5283UR-1 th ru 1N5314UR-1
• CASE: Hermeti cally sealed glass case.
• TERMINALS: Tin/lead fini shed copper clad steel or RoHS compliant m atte-tin finish available (commercial grade only).
• MARKING: Cathode band.
• POLARITY: Diode to be operated with the banded (cathode) end negativ e.
• MOUNTING SURFACE SELECTION: The Axial Coefficient of Expansion (COE) of this device is approximately +6PPM/°C.
The COE of the Mounting Surface System should be selected to provide a suita ble ma tch with this device.
• WEIGHT: 0.2 grams.
• See Package Dimensions on last page.
JAN 1N5283 UR -1 (e3)
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
JANS = JANS Level
Blank = Commercial
JEDEC type number
(see Electrical Characteristics
table)
RoHS Compliance
e3 = RoHS Compl iant (available
on commercial grade only)
Blank = non-RoHS Compliant
Metallurgically Bonded
Surface Mount Package Type
SYMBOL S & DEFI NITIONS
Symbol
Definition
IL
Limiting Current: A specified current below the lower knee of the c urrent-regulating characteristic.
IS
Regulator current: A current within the regulating range of a current-regulator diode.
PD
Power Dissipation: The power dissipation, dc.
RӨJL
Thermal Resistance Junction-to-Lead: The thermal resistance from the virtual junction(s) of a semiconducter device to
the lead.
TL
Lead Temperature: The temperature of a lead terminal.
TSP
Temperature Solder Pad: The maximum solder temperature that can be safely applied to the terminal.
VK
Knee Voltage: A specified regulator vol tage near the lower knee of the current-regulating characteristic.
VL
Limiting Voltage: The voltage at poi nt I
L
on the current-voltage characteristic.
VS
Regulator Voltage: A voltage within the regulating range of a current-regulating diode.
zk
Knee Impedance: The small-signal impedance at operating point VK on the current-voltage c haracteristic.
zs
Regulator Impedance: The small-signal i mpedan ce wit hin the r egu lating range of a current-regulator diode.
ZӨJX
Thermal Impedanc e: The thermal impedance junction to reference point.
T4-LDS-0160, Rev. 2 (111541) ©2011 Microsemi Corporation Page 3 of 6
1N5283UR-1 th ru 1N5314UR-1
TYPE
NUMBER
REGULATOR CURRENT
lS (mA) @ VS = 25 V
MINIMUM
DYNAMIC
IMPEDANCE
@VS = 25 V
zs (MΩ)
(Note 1)
MINIMUM
KNEE
IMPEDANCE
@VK = 6.0 V
zk (MΩ)
(Note 2)
MAXIMUM
LIMITING
VOLTAGE
@ lL = 0.8 lS
(min)
VL (Volts)
NOM
MIN
MAX
1N5283UR
1N5284UR
1N5285UR
1N5286UR
1N5287UR
0.22
0.24
0.27
0.30
0.33
0.198
0.216
0.243
0.270
0.297
0.242
0.264
0.297
0.330
0.363
25.00
19.00
14.00
9.000
6.600
2.750
2.350
1.950
1.600
1.350
1.00
1.00
1.00
1.00
1.00
1N5288UR
1N5289UR
1N5290UR
1N5291UR
1N5292UR
0.39
0.43
0.47
0.56
0.62
0.351
0.387
0.423
0.504
0.558
0.429
0.473
0.517
0.616
0.682
4.100
3.300
2.700
1.900
1.550
1.000
0.870
0.750
0.560
0.470
1.05
1.05
1.05
1.10
1.13
1N5293UR
1N5294UR
1N5295UR
1N5296UR
1N5297UR
0.68
0.75
0.82
0.91
1.00
0.612
0.675
0.738
0.819
0.900
0.748
0.825
0.902
1.001
1.100
1.350
1.150
1.000
0.880
0.800
0.400
0.335
0.290
0.240
0.205
1.15
1.20
1.25
1.29
1.35
1N5298UR
1N5299UR
1N5300UR
1N5301UR
1N5302UR
1.10
1.20
1.30
1.40
1.50
0.990
1.080
1.170
1.260
1.350
1.210
1.320
1.430
1.540
1.650
0.700
0.640
0.580
0.540
0.510
0.180
0.155
0.135
0.115
0.105
1.40
1.45
1.50
1.55
1.60
1N5303UR
1N5304UR
1N5305UR
1N5306UR
1N5307UR
1.60
1.80
2.00
2.20
2.40
1.440
1.620
1.800
1.980
2.160
1.760
1.980
2.200
2.420
2.640
0.475
0.420
0.395
0.370
0.345
0.092
0.074
0.061
0.052
0.044
1.65
1.75
1.85
1.95
2.00
1N5308UR
1N5309UR
1N5310UR
1N5311UR
1N5312UR
2.70
3.00
3.30
3.60
3.90
2.430
2.700
2.970
3.240
3.510
2.970
3.300
3.630
3.960
4.290
0.320
0.300
0.280
0.265
0.255
0.035
0.029
0.024
0.020
0.017
2.15
2.25
2.35
2.50
2.60
1N5313UR
1N5314UR 4.30
4.70 3.870
4.230 4.730
5.170 0.245
0.235 0.014
0.012 2.75
2.90
NOTE 1: zs is derived by superimposing a 90 Hz RMS signal equal to 10% of VS on VS.
NOTE 2: zk is derived by superimposing a 90 Hz RMS signal equal to 10% of VK on VK.
T4-LDS-0160, Rev. 2 (111541) ©2011 Microsemi Corporation Page 4 of 6
1N5283UR-1 th ru 1N5314UR-1
FIGURE 1 – CURRENT-REGULATOR CHARACTERISTICS
IS NOMINAL PINCH-OFF CURRENT (mA)
FIGURE 2 – TEMPERATURE COEFFICIENT
T
C
TEMPERATURE COEFFICIENT (%
/ °C)
T4-LDS-0160, Rev. 2 (111541) ©2011 Microsemi Corporation Page 5 of 6
1N5283UR-1 th ru 1N5314UR-1
IS NOMINAL PINCH-OFF CURRENT (mA)
FIGURE 3 – TEMPERATURE COEFFICIENT
IS NOMINAL PINCH-OFF CURRENT (mA)
FIGURE 4 – CURRENT REGULATION FACTOR
T
C
TEMPERATURE
3
I
P
CURRENT CHANGE
(mA)
T4-LDS-0160, Rev. 2 (111541) ©2011 Microsemi Corporation Page 6 of 6
1N5283UR-1 th ru 1N5314UR-1
Symbol
Dimensions
Inch
Millimeters
Min
Max
Min
Max
BD
0.94
.105
2.39
2.67
BL
.189
.205
4.80
5.21
ECT
.016
.022
0.41
0.55
S
.001 min
0.03 min
NOTES:
1. Dimensions are in inches.
2. Millimeters are given for general information only.
3. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology.