CPC1394 Single-Pole, Normally Open 4-Pin OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 600 120 35 Description Units VP mA The CPC1394 is a single-pole, normally-open (1-Form-A) Solid State Relay with an enhanced input to output isolation barrier of 5000Vrms. Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches. Control of the isolated output is accomplished by means of the highly effective GaAlAs infrared LED at the input. Features * * * * * 5000Vrms Input/Output Isolation 600VP Blocking Voltage 100% Solid State Small 4-Pin Package Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable Approvals * UL Certified Component: File E76270 * CSA Certified Component: Certificate 1172007 * EN/IEC 60950-1 Certified Component: TUV Certificate B 10 05 49410 006 Ordering Information Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part Number CPC1394G CPC1394GV CPC1394GR CPC1394GRTR Description 4-Pin DIP (100/Tube) 4-Pin DIP V-Bend (100/Tube) 4-Pin Surface Mount (100/Tube) 4-Pin Surface Mount (1000/Reel) Pin Configuration + Control - Control 1 4 2 3 Load Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb RoHS 2002/95/EC DS-CPC1394-R02 toff e3 www.clare.com 1 CPC1394 Absolute Maximum Ratings @ 25C Parameter Peak Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 3.00 mW / C Ratings 600 5 50 1 100 550 5000 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameters Output Characteristics Load Current Continuous Peak On-Resistance 1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current 2 Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 1 2 2 Conditions Symbol Min Typ Max t=10ms IL=120mA VL=600VP IL ILPK RON ILEAK - 26 - 120 400 35 1 IF=5mA, VL=10V IF=0mA, VL=50V, f=1MHz ton toff COUT - 0.85 0.46 50 5 3 - IL=120mA IF=5mA VR=5V IF IF VF IR 0.2 0.9 - 0.45 0.4 1.2 - 2 1.4 10 - CI/O - 3 - Units mA A ms pF mA V A pF Measurement taken within 1 second of on-time. For temperatures >60C, a LED current of 4mA is recommended. www.clare.com R02 CPC1394 PERFORMANCE DATA* 15 10 5 25 20 20 15 10 5 0 0 35 25 Device Count (N) Device Count (N) Device Count (N) 20 Typical Turn-Off Time (N=50, IF=5mA, IL=120mA, TA=25C) Typical Turn-On Time (N=50, IF=5mA, IL=120mA, TA=25C) Typical On-Resistance Distribution (N=50, IF=2mA, IL=120mA, TA=25C) 15 10 5 0 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 Turn-On Time (ms) 0.34 0.37 0.40 0.43 0.46 0.49 0.52 0.55 Turn-Off Time (ms) 25.50 25.75 26.00 26.25 26.50 26.75 27.00 On-Resistance () Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical IF for Switch Operation (N=50, IL=120mA, TA=25C) Typical Blocking Voltage Distribution (N=50, TA=25C) 20 20 25 20 15 10 Device Count (N) Device Count (N) Device Count (N) 30 15 10 5 15 10 5 5 0 0 1.230 1.235 1.240 1.245 1.250 LED Forward Voltage (V) 0 0.30 1.255 5 1.2 1.4 0.60 680 0 20 40 60 Temperature (C) 80 4 2 1 1.0 0.8 0.6 100 50 0 Typical Turn-On vs. Temperature (IL=70mA) 900 800 1.5 IF=5mA 0.5 80 40 IF=2mA 0.2 -40 0 20 40 60 LED Forward Voltage (V) 20 30 LED Current (mA) 2.0 1.0 -20 10 2.5 0.4 0.49 0.45 3.0 1.2 0.51 0.47 0 Typical IF for Switch Operation vs. Temperature (IL=70mA) 715 0.53 3 100 690 695 700 705 710 Blocking Voltage (VP) 0.55 0 -20 685 Typical Turn-Off vs. LED Forward Current (IL=70mA, TA=25C) Turn-Off Time (s) 1.1 IF=5mA IF=2mA 0.55 Turn-Off (ms) Turn-On Time (ms) 1.3 Turn-On Time (ms) LED Forward Voltage (V) 1.4 1.0 -40 Forward Current (mA) IF=50mA IF=20mA IF=10mA 1.5 0.40 0.45 0.50 LED Current (mA) Typical Turn-On vs. LED Forward Current (IL=70mA, TA=25C) Typical LED Forward Voltage Drop vs. Temperature 1.6 0.35 10 20 30 LED Current (mA) 40 50 Typical Turn-Off vs. Temperature (IL=70mA) IF=5mA 700 600 IF=2mA 500 400 300 -40 -20 0 20 40 60 Temperature (C) 80 100 200 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.clare.com 3 CPC1394 PERFORMANCE DATA* Typical On-Resistance vs. Temperature (IF=2mA, IL=70mA) 0.15 20 Load Current (mA) 25 0.05 0.00 -0.05 -0.10 -0.15 -20 0 20 40 60 Temperature (C) 80 100 100 725 Leakage Current (nA) Blocking Voltage (VP) 750 700 675 650 625 600 -40 -20 0 20 40 60 Temperature (C) 80 100 110 100 90 70 -4 Typical Blocking Voltage vs. Temperature 120 80 -3 -2 -1 0 1 Load Voltage (V) 2 3 Typical Leakage vs. Temperature (VL=600V) 40 20 0 20 40 60 Temperature (C) 80 0 20 40 60 Temperature (C) 80 100 10s 100s Energy Rating Curve 60 -20 -20 1.0 80 0 -40 -40 4 Load Current (A) 15 -40 Typical Load Current vs. Temperature (IF=2mA) 130 0.10 30 Load Current (A) On-Resistance () 35 Typical Load Current vs. Load Voltage (IF=2mA) 100 0.8 0.6 0.4 0.2 0.0 10s 100s 1ms 10ms 100ms Time 1s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02 CPC1394 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1394G / CPC1394GV / CPC1394GR MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1394G / CPC1394GV / CPC1394GR 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R02 RoHS 2002/95/EC e3 www.clare.com 5 CPC1394 MECHANICAL DIMENSIONS CPC1394G 3.30 0.050 (0.130 0.002) 0.991 (0.039) PC Board Pattern (Top View) 0.254 (0.010) 6 - 0.800 DIA. (6 - 0.031 DIA.) 6.350 0.127 (0.250 0.005) 4.572 0.127 (0.180 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) PIN 1 9.144 0.508 (0.360 0.020) 9 (ALL) 9 (ALL) 7.620 0.250 (0.300 0.010) 2.159 (0.085) 0.457 0.076 (0.018 0.003) 6.350 0.127 (0.250 0.005) 0.508 (0.020) 3.175 (0.125) 2.540 0.127 (0.100 0.005) Dimensions mm (inches) CPC1394GV 0.254 (0.010) 0.991 (0.039) 3.30 0.050 (0.130 0.002) PC Board Pattern (Top View) 10.160 0.508 (0.400 0.020) 6 - 0.800 DIA. (6 - 0.031 DIA.) 6.350 0.050 (0.250 0.002) 4.572 0.050 (0.180 0.002) 9 (ALL) 0.457 0.076 (0.018 0.003) 2.540 0.050 (0.100 0.002) 6 2.540 0.127 (0.100 0.005) 10.160 0.127 (0.400 0.005) Pin 1 9 (ALL) 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 1.778 (0.070) 0.127 (0.005) 2.92 (0.115) Dimensions mm (inches) www.clare.com R02 CPC1394 CPC1394GR 2.540 0.127 (0.100 0.005) PCB Land Pattern 3.300 0.050 (0.130 0.002) 0.635 0.254 (0.025 0.010) 6.350 0.127 (0.250 0.005) 9.525 (0.375) 7.620 0.254 (0.300 0.010) 8.80 (0.346) 1.60 (0.063) PIN #1 0.991 (0.039) 3.480 0.076 (0.137 0.003) 4.572 0.127 (0.180 0.005) 9 1 (ALL) 2.287 (0.09) 0.95 (0.037) 0.254 (0.010) 2.540 0.127 (0.100 0.005) Dimensions mm (inches) 0.102 min / 0.254 max (0.004 min / 0.010 max) 2.287 0.127 (0.090 0.005) CPC1394GR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.000.30 (0.6300.012) B0=5.00 (0.197) K0=4.20 (0.165) K1=3.70 (0.146) A0=10.01 (0.394) P=12.00 (0.472) Dimensions mm (inches) Embossed Carrier Embossment NOTES: 1. All dimensions meet EIA-481-C requirements 2. Unless otherwise noted, tolerances = 0.10 (0.004) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-CPC1394-R02 (c)Copyright 2010, Clare, Inc. All rights reserved. Printed in USA. 11/1/2010