http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2011.1.13
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Film Type
0.6±0.03
0.3±0.03 0.3±0.03
0.15±0.05
(in mm)
Polarity Marking
0.6 to 56nH 68 to 120nH
Colored Side Polarity Marking
Colored Side
0.6±0.03
0.3±0.03 0.3±0.03
0.15±0.05
Chip Inductor (Chip Coil) for High Frequency Film Type
LQP03T_02 Series (0201 Size)
■ Dimensions ■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 15000
J330mm Paper Tape 50000
BBulk(Bag) 500
■ Rated Value (p: packaging code)
Part Number Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQP03TN0N6B02p
0.6nH±0.1nH 500MHz 850mA 0.07ohm 14 500MHz 6000MHz
LQP03TN0N6C02p
0.6nH±0.2nH 500MHz 850mA 0.07ohm 14 500MHz 6000MHz
LQP03TN0N7B02p
0.7nH±0.1nH 500MHz 800mA 0.08ohm 14 500MHz 6000MHz
LQP03TN0N7C02p
0.7nH±0.2nH 500MHz 800mA 0.08ohm 14 500MHz 6000MHz
LQP03TN0N8B02p
0.8nH±0.1nH 500MHz 800mA 0.08ohm 14 500MHz 6000MHz
LQP03TN0N8C02p
0.8nH±0.2nH 500MHz 800mA 0.08ohm 14 500MHz 6000MHz
LQP03TN0N9B02p
0.9nH±0.1nH 500MHz 750mA 0.10ohm 14 500MHz 6000MHz
LQP03TN0N9C02p
0.9nH±0.2nH 500MHz 750mA 0.10ohm 14 500MHz 6000MHz
LQP03TN1N0B02p
1.0nH±0.1nH 500MHz 750mA 0.10ohm 14 500MHz 6000MHz
LQP03TN1N0C02p
1.0nH±0.2nH 500MHz 750mA 0.10ohm 14 500MHz 6000MHz
LQP03TN1N1B02p
1.1nH±0.1nH 500MHz 750mA 0.10ohm 14 500MHz 6000MHz
LQP03TN1N1C02p
1.1nH±0.2nH 500MHz 750mA 0.10ohm 14 500MHz 6000MHz
LQP03TN1N2B02p
1.2nH±0.1nH 500MHz 750mA 0.10ohm 14 500MHz 6000MHz
LQP03TN1N2C02p
1.2nH±0.2nH 500MHz 750mA 0.10ohm 14 500MHz 6000MHz
LQP03TN1N3B02p
1.3nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N3C02p
1.3nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N4B02p
1.4nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N4C02p
1.4nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N5B02p
1.5nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N5C02p
1.5nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N6B02p
1.6nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N6C02p
1.6nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N7B02p
1.7nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
Operating Temperature Range: -55 to +125°C
Only for reflow soldering.
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2011.1.13
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Film Type
Part Number Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQP03TN1N7C02p
1.7nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N8B02p
1.8nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N8C02p
1.8nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N9B02p
1.9nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN1N9C02p
1.9nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN2N0B02p
2.0nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN2N0C02p
2.0nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN2N1B02p
2.1nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN2N1C02p
2.1nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN2N2B02p
2.2nH±0.1nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN2N2C02p
2.2nH±0.2nH 500MHz 600mA 0.15ohm 14 500MHz 6000MHz
LQP03TN2N3B02p
2.3nH±0.1nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N3C02p
2.3nH±0.2nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N4B02p
2.4nH±0.1nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N4C02p
2.4nH±0.2nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N5B02p
2.5nH±0.1nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N5C02p
2.5nH±0.2nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N6B02p
2.6nH±0.1nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N6C02p
2.6nH±0.2nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N7B02p
2.7nH±0.1nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N7C02p
2.7nH±0.2nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N8B02p
2.8nH±0.1nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N8C02p
2.8nH±0.2nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N9B02p
2.9nH±0.1nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN2N9C02p
2.9nH±0.2nH 500MHz 500mA 0.20ohm 14 500MHz 6000MHz
LQP03TN3N0B02p
3.0nH±0.1nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N0C02p
3.0nH±0.2nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N1B02p
3.1nH±0.1nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N1C02p
3.1nH±0.2nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N2B02p
3.2nH±0.1nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N2C02p
3.2nH±0.2nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N3B02p
3.3nH±0.1nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N3C02p
3.3nH±0.2nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N4B02p
3.4nH±0.1nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N4C02p
3.4nH±0.2nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N5B02p
3.5nH±0.1nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N5C02p
3.5nH±0.2nH 500MHz 450mA 0.25ohm 14 500MHz 6000MHz
LQP03TN3N6B02p
3.6nH±0.1nH 500MHz 400mA 0.30ohm 14 500MHz 6000MHz
LQP03TN3N6C02p
3.6nH±0.2nH 500MHz 400mA 0.30ohm 14 500MHz 6000MHz
LQP03TN3N7B02p
3.7nH±0.1nH 500MHz 400mA 0.30ohm 14 500MHz 6000MHz
LQP03TN3N7C02p
3.7nH±0.2nH 500MHz 400mA 0.30ohm 14 500MHz 6000MHz
Operating Temperature Range: -55 to +125°C
Only for reflow soldering.
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2011.1.13
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Film Type
Part Number Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQP03TN3N8B02p
3.8nH±0.1nH 500MHz 400mA 0.30ohm 14 500MHz 6000MHz
LQP03TN3N8C02p
3.8nH±0.2nH 500MHz 400mA 0.30ohm 14 500MHz 6000MHz
LQP03TN3N9B02p
3.9nH±0.1nH 500MHz 400mA 0.30ohm 14 500MHz 5700MHz
LQP03TN3N9C02p
3.9nH±0.2nH 500MHz 400mA 0.30ohm 14 500MHz 5700MHz
LQP03TN4N3H02p
4.3nH±3% 500MHz 350mA 0.40ohm 14 500MHz 5300MHz
LQP03TN4N3J02p
4.3nH±5% 500MHz 350mA 0.40ohm 14 500MHz 5300MHz
LQP03TN4N7H02p
4.7nH±3% 500MHz 350mA 0.40ohm 14 500MHz 4400MHz
LQP03TN4N7J02p
4.7nH±5% 500MHz 350mA 0.40ohm 14 500MHz 4400MHz
LQP03TN5N1H02p
5.1nH±3% 500MHz 350mA 0.40ohm 14 500MHz 4200MHz
LQP03TN5N1J02p
5.1nH±5% 500MHz 350mA 0.40ohm 14 500MHz 4200MHz
LQP03TN5N6H02p
5.6nH±3% 500MHz 350mA 0.40ohm 14 500MHz 4000MHz
LQP03TN5N6J02p
5.6nH±5% 500MHz 350mA 0.40ohm 14 500MHz 4000MHz
LQP03TN6N2H02p
6.2nH±3% 500MHz 300mA 0.60ohm 14 500MHz 4000MHz
LQP03TN6N2J02p
6.2nH±5% 500MHz 300mA 0.60ohm 14 500MHz 4000MHz
LQP03TN6N8H02p
6.8nH±3% 500MHz 300mA 0.60ohm 14 500MHz 3900MHz
LQP03TN6N8J02p
6.8nH±5% 500MHz 300mA 0.60ohm 14 500MHz 3900MHz
LQP03TN7N5H02p
7.5nH±3% 500MHz 300mA 0.60ohm 14 500MHz 3700MHz
LQP03TN7N5J02p
7.5nH±5% 500MHz 300mA 0.60ohm 14 500MHz 3700MHz
LQP03TN8N2H02p
8.2nH±3% 500MHz 250mA 0.70ohm 14 500MHz 3600MHz
LQP03TN8N2J02p
8.2nH±5% 500MHz 250mA 0.70ohm 14 500MHz 3600MHz
LQP03TN9N1H02p
9.1nH±3% 500MHz 250mA 0.70ohm 14 500MHz 3300MHz
LQP03TN9N1J02p
9.1nH±5% 500MHz 250mA 0.70ohm 14 500MHz 3300MHz
LQP03TN10NH02p
10nH±3% 500MHz 250mA 0.70ohm 14 500MHz 3200MHz
LQP03TN10NJ02p
10nH±5% 500MHz 250mA 0.70ohm 14 500MHz 3200MHz
LQP03TN12NH02p
12nH±3% 500MHz 250mA 0.70ohm 12 500MHz 2900MHz
LQP03TN12NJ02p
12nH±5% 500MHz 250mA 0.70ohm 12 500MHz 2900MHz
LQP03TN15NH02p
15nH±3% 500MHz 250mA 0.70ohm 12 500MHz 2600MHz
LQP03TN15NJ02p
15nH±5% 500MHz 250mA 0.70ohm 12 500MHz 2600MHz
LQP03TN18NH02p
18nH±3% 500MHz 200mA 0.80ohm 12 500MHz 2200MHz
LQP03TN18NJ02p
18nH±5% 500MHz 200mA 0.80ohm 12 500MHz 2200MHz
LQP03TN22NH02p
22nH±3% 500MHz 150mA 1.90ohm 12 500MHz 2200MHz
LQP03TN22NJ02p
22nH±5% 500MHz 150mA 1.90ohm 12 500MHz 2200MHz
LQP03TN27NH02p
27nH±3% 500MHz 140mA 2.30ohm 12 500MHz 2000MHz
LQP03TN27NJ02p
27nH±5% 500MHz 140mA 2.30ohm 12 500MHz 2000MHz
LQP03TN33NJ02p
33nH±5% 300MHz 120mA 2.95ohm 9 300MHz 1700MHz
LQP03TN39NJ02p
39nH±5% 300MHz 120mA 3.00ohm 9 300MHz 1500MHz
LQP03TN47NJ02p
47nH±5% 300MHz 100mA 3.60ohm 9 300MHz 1300MHz
LQP03TN56NJ02p
56nH±5% 300MHz 100mA 3.90ohm 9 300MHz 1200MHz
LQP03TN68NJ02p
68nH±5% 300MHz 50mA 8.00ohm 8 300MHz 1100MHz
LQP03TN82NJ02p
82nH±5% 300MHz 50mA 10.0ohm 8 300MHz 1000MHz
LQP03TNR10J02p
100nH±5% 300MHz 40mA 10.0ohm 8 300MHz 900MHz
Operating Temperature Range: -55 to +125°C
Only for reflow soldering.
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
4
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2011.1.13
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Film Type
Part Number Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQP03TNR12J02p
120nH±5% 300MHz 40mA 12.0ohm 8 300MHz 800MHz
0
20
40
60
80
100 1000 10000
Frequency (MHz)
Q
120nH
82nH
56nH
27nH
3.0nH
10nH
1
10
100
1000
100 1000 10000
Frequency (MHz)
Inductance (nH)
10nH
3nH
56nH 27nH
82nH
120nH
Operating Temperature Range: -55 to +125°C
Only for reflow soldering.
■ Q-Frequency Characteristics (Typ.) ■ Inductance-Frequency Characteristics (Typ.)
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
