88 -0,2 2,9 -0,3 6,4 -0,1 date ERNI XXXXXXX 5,2 -0,1 RC 2 11,6 max. Stecklange mating length Datum class 2,5 0,2 Anforderungsstufe a b c d Stecklange / mating length 2,54 31x2,54=78,74 a32 4,8 +0,2 +0,1 1 -0,1 a1 0,3 11,3 6 +0,1 2,8 E = early mate, late break / voreilend S = standard L = late mate, early break / nacheilend 90 0,1 d32 THR = through hole reflow Isolierwerkstoff / housing material : PA46 GF 30 Bauart 4 / type 4 Anforderungsstufe 2 = 400 Steckzyklen / performance class 2 = 400 mating cycles Fehlende Mae und Angaben nach IEC 60 603-2 / DIN EN 60 603-2 2,5 -0,2 d1 13,7max. 85,2 +0,2 3x2,54=7,62 95 max. L S E 0,8 0,1 2,54 0,8 0,1 0,6 Missing information and dimensions per IEC 60 603-2 / DIN EN 60 603-2 Bestuckungsplan / contact layout 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Bedruckung siehe Zeichnung 294905 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S Leiterplatten-Lochbild / PCB drillhole pattern S S S S S S S S 1 0,1 +0,1 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S Marking see drawing 294905 a b c d alle Locher 0,05 all holes 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 a b c d 0,3 3x 2,54 =7,62 2,54 2,8 S S S S 2,54 31x 2,54 =78,74 90 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. S S S S Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Messerleiste RD 128 THR+Clip Male Con. RD 128 THR+Clip 374460 www.ERNI.com - 02.06.2009 Index Date Class STVRD I A3