DO NOT
SCALE FROM
THIS PRINT
-S: STANDOFFS
(USE BSW-36-X-S,
SEE TABLE 1)
OPTION
-G: GOLD, 20Au / 50 Ni MIN CONTACT, 3 AU / 50 Ni MIN
ON TAIL
-T: MATTE TIN CONTACT AND TAIL (STYLE -04 ONLY)
-S: SELECTIVE, 30 Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
-H: HEAVY GOLD, 30 Au / 50 Ni MIN ON
CONTACT, 3 Au / 50 MIN Ni ON TAIL (STYLE -04 ONLY)
-L: SELECTIVE GOLD, 10Au / 50 Ni MIN ON
CONTACT, MATTE TIN TAIL
PLATING SPECIFICATION
(VALUES GIVEN ARE IN MICRO INCHES)
-04: C-8-5-X
(STANDARD I/W FORCES)
-24: C-17-5-X
(LOW I/W FORCES)
LEAD STYLE
SEE TABLE 1
ROW SPECIFICATION
-02 THRU -36 (PER ROW)
No OF POSITIONS
BSW-1XX-XX-X-X-X
+.03[.8])
((No OF POS x .10[2.5])
.060 1.52
(SEE NOTE 4)
.350
REF
8.89
"D"
±.010
2
MAX SWAY
(EITHER DIRECTION)
-D/-S/-M
BSW-36-X-X
C2
.200 5.08
REF
.100 2.54
REF
2
MAX SWAY
(EITHER DIRECTION)
-S
C
LC
L
.250 6.35
REF
.170 4.32
REF
-M
C
L
C
L
.400 10.16
REF
.100
REF
2.54
.100
REF
2.54
.100
REF
2.54
-D
C
L
C
L
C
L
C
L
.30 7.6
R
.042 1.07
(SEE TABLE 1)
"B"
CONTACT
SCALE 1.5:1
CRITICAL 1 DIMMENSION MUST BE VERIFIED AT
BEGINNING, MIDDLE, AND END OF EACH LOT
C-08-5-X or
C-17-5-X
A
C1
.005
A
-D/-D-S
0171
72 02
-M
5001
-S/-S-S
01 50
C
FINAL ASSEMBLY
POSITION NUMBER LAYOUT
AG
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
.100 BOTTOM MOUNT SOCKET ASSEMBLY
BY:
BSW-1XX-XX-X-X-X
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
PURVIS
03/31/1998
2
1
SHEET SCALE: 2:1
F:\DWG\MISC\MKTG\BSW-1XX-XX-X-X-X-MKT.SLDDRW
NOTES:
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 3lbs.
3. MAXIMUN ALLOWABLE BOW: .003[.08] INCH/INCH
AFTER ASSEMBLY
4. "END WALLS" AFTER CUTTING SHOULD BE .023[.58]
5. MAXIMUM CUT FLASH: .010[.25].
6. THE IDENTIFICATION SIDE IS TO BE DOWN OR AGAINST
THE FORM TOOLING.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
MATERIAL:
INSULATOR: PET, UL 94 VO, COLOR: BLACK
CONTACT: PHOS BRONZE
REVISION AG
+.03[.8])
((No OF POS x .10[2.5])
.060 1.52
(SEE NOTE 4)
.365
REF
9.27
"C"
2
MAX SWAY
(EITHER DIRECTION)
-D-S/-S-S
BSW-36-X-X
STANDOFFS
(-S OPTION)
C2
.200 5.08
REF
.100 2.54
REF
-S-S
C
L
C
L
.400 10.16
REF
.100
REF
2.54
.100
REF
2.54
.100
REF
2.54
-D-S
C
L
C
L
C
LC
L
SEE NOTE 6
FINAL ASSEMBLY
SHEET OF
.100 BOTTOM MOUNT SOCKET ASSEMBLY
BY:
BSW-1XX-XX-X-X-X
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
PURVIS
03/31/1998
2
2
SHEET SCALE: 2:1
BSW-1XX-XX-X-X-X
F:\DWG\MISC\MKTG\BSW-1XX-XX-X-X-X-MKT.SLDDRW
REVISION AG
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
