Rev. 7
Aluminum Electrolytic Capacitors
MERITEK
RF Series
(High R.C. , High Reliability)
F
EATURES
High ripple current, low E.S.R. and long life.
Suitable for electronic ballast, adaptor and switching power
S
PECIFICATIONS
Item Characteristic
Operating Temp Range - 40 ~ +105C - 25 ~ +105C
Rated Working Voltage 160 ~ 400VDC 450VDC
Capacitance Tolerance
(120Hz 20C) 20%(M)
Leakage Current
(20C)
I 0.06CV+10(uA)
＊After 2 minutes
I : Leakage Current (A)
C : Rated Capacitance(F)
V : Working Voltage (V)
Surge Voltage
(20C)
W.V. 160 200 250 400 450
S.V. 200 250 300 450 500
Dissipation Factor ( tan )
(120Hz 20C)
W.V. 160 200 250 400 450
tan 0.15 0.15 0.15 0.24 0.24
Low Temperature Stability Impedance ratio at 120Hz
Rated Voltage (V) 160~250 400 450
-25C / +20C 3 6 6
-40C / +20C 4 6 -
Load Life After hours (D ≤ 8mm 2000hrs, D ≥ 10mm 3000hrs) application of W.V. and +105C ripple
current value , the capacitor shall meet the following limits. ( DC + ripple peak voltage rated
working voltage )
Capacitance Change
20% of initial value.
Dissipation Factor 200% of initial specified value
Leakage Current initial specified value
Shelf Life At +105C no voltage application after 1000 hours, the capacitor shall meet the limits for load life
characteristics. ( with voltage treatment )
P
ART
N
UMBER
S
YSTEM
D
IMENSIONS
(mm)
D 10 12.5 16 18
F 5.0 5.0 7.5 7.5
d 0.6 0.6 0.8 0.8
a 1.5 1.5 1.5 1.5
RF 160V 101 M TA 16x25
Meritek Series
Rated Voltage
Rated Capacitance
Express in micro farad(uF), First two digits are
significant figures, Third digit denotes number of
zeros. ‘R’ denotes decimal point for values less
than 10uF
Tolerance
M - 20%
Package
Code TA TR Blank
Tape & Ammo Tape & Reel
Case size – (D) Diameter x (L) Length in mm (Optional)
Rev. 7
Aluminum Electrolytic Capacitors
MERITEK
RF Series
(High R.C. , High Reliability)
R
IPPLE
C
URRENT
C
OEFFICIENTS
Frequency(Hz) 120 1k 10k 100k
W.V. Multiplie
r
160~450 D=10mm 0.25 0.61 0.88 1.0
D>10mm 0.35 0.66 0.89 1.0
C
ASE
S
IZE &
M
AX
R
IPPLE
C
URRENT
Cap.
(uF)
V 160 200 250
Item DxL IMP. R.C. DxL IMP. R.C. DxL IMP. R.C.
4.7 10x16 3.45 150
10 10x16 1.47 220 10x16 1.47 220 10x20 2.70 240
22 10x20 0.80 350 10x20 0.80 350 12.5x20 1.47 380
33 10x20 0.62 430 12.5x20 0.62 460 12.5x25 1.15 510
47 12.5x20 0.50 550 12.5x25 0.50 610 16x25 0.92 610
68 12.5x20 0.39 660 12.5x25 0.39 730 16x31.5 0.71 810
100 16x25 0.32 890 16x31.5 0.32 980 18x35.5 0.59 1110
220 16x35.5 0.17 1540 18x35.5 0.17 1640 18x40 0.31 1730
Cap.
(uF)
V 400 450
Item DxL IMP. R.C. DxL IMP. R.C.
2.2 10x16 4.94 110
3.3 10x20 2.60 170 10x20 4.11 150
4.7 10x25 2.20 220 12.5x20 3.47 190
10 12.5x25 1.72 340 12.5x25 2.72 300
22 16x25 0.94 510 16x31.5 1.48 500
33 16x31.5 0.73 690 16x31.5 1.15 620
47 16x31.5 0.59 820 18x31.5 0.92 780
68 16x31.5 0.46 990
100 18x31.5 0.38 1280
120 18x35.5 0.32 1480
150 18x40 0.26 1740
180 18x40 0.23 1910
Temperature(C) 65 75 85 95 105
Multiplier 1.8 1.65 1.50 1.25 1.00
Case size :
DxL (mm)
Max. impedance :
Ω 20
C 100kHz
Max. ripple current :
mA(rms) 105
C 100kHz
