Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
N-Channel Junction Silicon FET
Capacitor Microphone Applications
Ordering number:ENN4755
2SK2219
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
82599TH (KT)/63094MT (KOTO) BX-0346 No.4755–1/4
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Package Dimensions
unit:mm
2058A
[2SK2219]
Features
· Ultrasmall-sized package permitting 2SK2219-
applied sets to be made small and slim.
· Especially suited for use in audio, telephone capaci-
tor microphones.
· Excellent voltage characteristic.
· Excellent transient characteristic.
· Adoption of FBET process.
˚C
˚C
Electrical Characteristics at Ta = 25˚C
1 : Source
2 : Drain
3 : Gate
SANYO : MCP
* : The 2SK2219 is classified by IDSS as follows : (unit : µA) Continued on next page.
Marking : D
IDSS rank : 21, 22, 23
0.3
0.650.65
2.0
0.425 1.250
2.1
0.425
0.15
0 to 0.1
0.2
0.3 0.6
0.9
12
3
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVniarD-ot-etaGV
ODG 02–V
tnerruCetaGI
G01Am
tnerruCniarDI
D1Am
noitapissiDrewoPelbawollAP
D001Wm
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55–
042120410532201200532023
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
egatloVnwodkaerBniarD-ot-etaGV
ODG)RB( IGAµ001–=02–V
tnerruCniarDegatloVetaG-oreZI
SSD VSD V,V5= SG 0=*041*005µA
egatloVffotuCV
)ffo(SG VSD I,V5= DAµ1=2.0–6.0–2.1–V
ecnattimdArefsnarTdrawroF|sfy|V
SD V,V5= SG zHk1=f,0=5.02,1Sm
ecnaticapaCtupnIssiCV
SD V,V5= SG zHM1=f,0=1.4Fp
ecnaticapaCrefsnarTesreveRssrCV
SD V,V5= SG zHM1=f,0=88.0Fp
2SK2219
No.4755–2/4
Continued from preceding page.
Test Circuit
Voltage Gain
Frequency Characteristic
Distortion
Reduced Voltage Characteristic
Ta=25°C, VCC=4.5V, RL=1kΩ, Cin=15pF, See specified Test Circuit
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
niaGegatloVG
VVNI zHk1=f,Vm01=0.3–Bd
citsiretcarahCegatloVdecudeR ∆GVV VNI V,zHk1=f,Vm01= CC 5.4= →V5.12.1–5.3–Bd
citsiretcarahCycneuqerF ∆GfV zH011otzHk1=f 0.1–Bd
ecnadepmItupnIniZzHk1=f52MΩ
ecnadepmItuptuOoZzHk1=f 007 Ω
noitrotsiDcinomraHlatoTDHTV
NI zHk1=f,Vm03=0.1%
egatloVesioNtuptuOV
ON VNI evrucA,0= 011–Bd
2SK2219
No.4755–3/4
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of August, 1999. Specifications and information herein are subject to
change without notice.
2SK2219
PS No.4755–4/4
