Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 0444164951
Printed: 2013-07-03
Part Number: 0444164951
Frequency Range: Broadband Frequencies 25-300 MHz (43 & 44 materials)
Description: 44 ROUND CABLE CORE ASSEMBLY
Application: Suppression Components
Where Used: Cable Component
Part Type: Round Cable Snap-Its
Mechanical Specifications
Weight: 17.000 (g)
Part Type Information
Round cable snap-its can easily accommodate round cables or bundled wires with diameters from 2.5 mm (.100'') to
25.4 mm (1.000''). These assemblies are available in four ferrite material classes to suppress differential or
common-mode conducted EMI from 1 MHz into the GHz region. The polypropylene cases are meeting the RoHS restrictions
of hazardous substances and have a flammability rating of UL94 V-0.
-Round cable snap-it assemblies are controlled for impedances only. Minimum impedance values are specified for the + marked
frequencies. The minimum impedance is typically the listed impedance less 20%.
-Single turn impedance tests for the 31, 43, 44 and 46 material are performed on the 4193A Vector Impedance Analyzer. The 61
material parts are tested on the 4291A RF Impedance Analyzer. Cores are tested with the shortest practical wire length.
-Many of the snap-it parts have round core equivalents. See Round Cable EMI Suppression Cores section of our catalog.
-'B' Dimension is the core Dimension.
-Round Cable Snap-it Kits are available for each of the four suppression materials. 31 Snap-It Kit (0199000030),
43 Snap-It Kit (0199000031), 46 Core and Snap-It Kit (0199000032) and 61 Snap-It Kit (0199000033).
-Explanation of Part Numbers: Digits 1 & 2 = product class and 3& 4 = material grade.
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 0444164951
Printed: 2013-07-03
Mechanical Specifications
Dim mm mm nominal inch
tol inch misc.
A 17.30 - 0.680 -
B 5.10 - 0.201 -
C 36.20 - 1.420 -
D 8.40 - 0.331 -
E - - - -
F - - - -
G - - - -
H - - - -
J - - - -
K - - - -
Land Patterns
VW XYZ
ref
-- ---
-- ---
Winding Information
Turns Wire 1st Wire 2nd Wire
Tested Size Length Length
- - - -
Reel Information
Tape Width Pitch Parts 7 '' Parts 13 '' Parts 14 ''
mm mm Reel Reel Reel
- ----
Package Size
Pkg Size
-
(-)
Electrical Specifications
Typical Impedance ( )
10 MHz 90
25 MHz+ 144
100 MHz+ 245
250 MHz 257 Connector Plate
# Holes # Rows
- -
Electrical Properties
Legend
+ Test frequency
Preferred parts, the suggested choice for new designs,have shorter lead times and are more readily available.
The column H(Oe) gives for each bead the calculated dc bias field in oersted for 1 turn and 1 ampere direct current. The actual dc H field in
the application is this value of H times the actual NI (ampere-turn) product. For the effect of the dc bias on the impedance of the bead material,
see figures 18-23 in the application note How to choose Ferrite Components for EMI Suppression.
A ½ turn is defined as a single pass through a hole.
l/A - Core Constant l e: Effective Path Length
Ae: Effective Cross-Sectional Area Ve: Effective Core Volume
AL- Inductance Factor (L
__
N2)Nl - Value of dc Ampere-turns
N/AWG - Number of Turns/Wire Size for Test Coil
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 0444164951
Printed: 2013-07-03
See next page for further material specifications.
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 0444164951
Printed: 2013-07-03
Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) 324-7748 www.fair-rite.com
Fair-Rite Product's Catalog
Part Data Sheet, 0444164951
Printed: 2013-07-03
