Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOVTM 25S Varistor Series UltraMOV(R) 25S Varistor Series RoHS Description The UltraMOV(R) 25S Varistor Series is designed for applications requiring high peak surge current ratings and high energy absorption capability. UltraMOVTM varistors are primarily intended for use in AC Line Voltage applications such as Surge Protective Devices (SPD), Uninterruptable Power Supplies (UPS), AC Power Taps, AC Power Meters, or other products that require voltage clamping of high transient surge currents from sources such as lightning, inductive load switching, or capacitor bank switching. Agency Approvals Agency Agency Approval Agency File Number UL1449 E320116 22.2-1 091788 IEC 61051-1, IEC61051-2, IEC 60950-1 (Annex Q) 116895 Additional Information Datasheet Resources Samples These devices have 25mm square forms are produced in a radial lead package and offered with straight leads. UltraMOV(R) 25S varistors are manufactured with recognized epoxy encapsulation and are rated for ambient temperatures up to 85C with no derating. This 25S Series is LASER-branded and is supplied in bulk packaging. Features * Lead-free and RoHS compliant. * Custom voltage types available * High peak surge current rating (ITM) 22kA, single 8/20s pulse, (25mm) * Standard lead form and lead space options * Standard operating voltage range compatible with common AC line voltages (115 to 750VAC) Absolute Maximum Ratings * For ratings of individual members of a series, see Device Ratings and Specifications chart Continuous Steady State Applied Voltage: UltraMOV(R) 25S Varistor Series Units AC Voltage Range (VM(AC)RMS) 115 to 750 V DC Voltage Range (VM(DC)) 150 to 970 V 22,000 A Transients: Peak Pulse Current (ITM) 8x20s Current Wave Single Pulse Single-Pulse Energy Capability (WTM) 2ms Current Wave 230 to 890 J Operating Ambient Temperature Range (TA) -55 to +85 C Storage Temperature Range (TSTG) -55 to +125 C <0.01 %/C Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current Hi-Pot Encapsulation (COATING Isolation Voltage Capability) Dielectic Withstand DC for 1 min per MIL-STD-202, Method 301 Insulation Resistance of the Epoxy Coating 2500 V 1000 M CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/01/18 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOVTM 25S Varistor Series Ratings & Specifications Part Number Branding V25S115P V25S130P V25S140P V25S150P V25S175P V25S230P V25S250P V25S275P V25S300P V25S320P V25S385P V25S420P V25S440P V25S460P V25S510P V25S550P V25S625P V25S750P P25S115 P25S130 P25S140 P25S150 P25S175 P25S230 P25S250 P25S275 P25S300 P25S320 P25S385 P25S420 P25S440 P25S460 P25S510 P25S550 P25S625 P25S750 Maximum Rating (85C) Continuous Transient Peak Surge Energy AC Volts DC Volts Current 2ms 8 x 20s WTM ITM VM(DC) 1x VM(AC)RMS 1 x Pulse Pulse (V) (V) (J) (A) 115 150 230 22000 130 170 255 22000 140 180 285 22000 150 200 300 22000 175 225 315 22000 230 300 400 22000 250 320 435 22000 275 350 470 22000 300 385 500 22000 320 420 540 22000 385 505 630 22000 420 560 655 22000 440 585 675 22000 460 615 690 22000 510 670 700 22000 550 745 765 22000 625 825 800 22000 750 970 890 22000 Specifications (25C) Maximum Clamping Voltage at 100A, 8 x 20s UL 1449 Voltage Protection Rating Typical Capacitance f = 1MHz VNOM Max VC VPR C 198 225.5 242 264 297 396 429 473 517 561 682 748 786.5 825 902 1001 1100 1320 295 335 355 390 450 585 640 700 765 825 1010 1100 1160 1220 1335 1475 1625 1950 400 500 500 500 600 700 800 900 1000 1000 1200 1500 n/a n/a n/a n/a n/a n/a (pF) 4500 3900 3500 3200 2550 1900 1750 1610 1450 1350 1080 1000 900 870 820 750 660 550 Varistor Voltage at 1mA DC Test Current VNOM Min (V) 162 184.5 198 216 243 324 351 387 423 459 558 612 643.5 675 738 819 900 1080 (V) Note: Average powder dissipation of transients should not exceed 1.5 watts. Transient V-I Characteristics Curves Peak Current, Energy and Power Derating Curve Peak Pulse Current Test Waveform for Clamping Voltage 100 PER C EN T O F PEAK VAL U E P E R C E N T O F R A TE D V A L U E 100 80 60 40 20 0 O1 0 Figure 1 50 55 50 60 70 80 90 100 110 120 130 AM BIEN T T EM PER AT U R E (C ) For applications exceeding 85C ambient temperature, the peak surge current and energy ratings must be reduced as shown above. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/01/18 Figure 2 t t1 T IM E t2 01 = Virtual Origin of Wave T = Time from 10% to 90% of Peak T1 = Rise Time = 1.25 x T T2 = Decay Time Example - For an 8/20 s Current Waveform: 8s = T1 = Rise Time 20s = T2 = Decay Time Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOVTM 25S Varistor Series Transient V-I Characteristic Curve 10000 M a xim u m P e a k Vo lta g e (V ) 625 440 420 385 510 460 750 550 1000 115 100 0.0 0 0 0 1 0.0 0 0 1 0.0 0 1 0.0 1 Figure 3 130 0.1 140 150 175 1 10 250 230 100 275 300 1000 320 10000 100000 P e a k C u rre n t (A ) Pulse Rating Curve 100000 1 2 15 10000 Peak Current (A) 1 02 1 03 1000 1 04 1 05 1 06 100 10 1 Figure 4 10 100 1000 10000 Impulse Duration (s) Note: Repetitive surge capability is qualified and tested based on 8/20us current waveform (not combination waveform) and UL1449 40.7.3 (Edition 4) test condition. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/01/18 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOVTM 25S Varistor Series Wave Solder Profile Non Lead-free Wave Solder Profile Lead-free Wave Solder Profile 300 300 250 TEMPERATURE (C) TEMPERATURE (C) Maximum Wave 260C Maximum Wave 240C 250 200 150 100 50 200 150 100 50 0 0 0 0.5 1 Figure 5 1.5 2 2.5 3 3.5 4 TIME(MINUTES) Physical Specifications 0 0.5 1 1.5 Figure 6 2 2.5 3 3.5 4 TIME(MINUTES) Environmental Specifications -55C to +85C Lead Material Copper Clad Steel Wire Operating Temperature Soldering Characteristics Solderability per MIL-STD-202, Method 208 Storage Temperature -55C to +125C Insulating Material Cured, flame retardant epoxy polymer meets UL94V-0 requirements Humidity Aging +85C, 85% RH, 1000 hours +/-10% typical voltage change Device Labeling Marked with LF, voltage, UL/CSA Logos, and date code Thermal Shock +85C to -40C 5 times +/-10% typical voltage change Solvent Resistance MIL-STD-202, Method 215 Moisture Sensitivity Level 1, J-STD-020 UltraMOV(R) 25S Varistor Series for High-Temperature Operating Conditions: Phenolic coated devices are available with improved maximum operating temperature 125C. These devices also have improved temperature cycling capability. Ratings and specifications are per standard series except Hi-Pot Encapsulation (Isolation Voltage Capability) = 500V. To order: add 'X1347' to part number (e.g. V25S150PX1347). These devices are NOT UL, CSA, CECC or VDE certified.Contact factory for further details. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/01/18 Metal-Oxide Varistors (MOVs) Radial Lead Varistors > UltraMOVTM 25S Varistor Series Product Dimensions (mm) D A max b min b max D max e min e max L A V25S115P E e1 E max 1.5 2.7 5.7 V25S130P 1.6 2.9 5.9 1.7 3.0 6.0 V25S150P 1.8 3.1 6.1 V25S175P 1.9 3.3 6.3 V25S230P 2.0 3.4 6.4 V25S250P 2.1 3.5 6.5 V25S275P 2.3 3.7 6.7 2.4 3.9 6.9 2.6 4.1 7.1 V25S385P 3.0 4.7 7.7 V25S420P 3.3 5.0 8.0 V25S440P 3.4 5.2 8.2 V25S460P 3.6 5.4 8.4 V25S510P 1.6 3.4 8.7 V25S320P e e1 max V25S140P V25S300P b e1 min 32.5 0.95 1.05 28 11.7 13.7 V25S550P 1.9 3.9 9.2 V25S625P 2.3 4.3 9.6 V25S750P 3.1 5.4 10.7 L min 25.4 Notes 1. Additional optional lead form, packaging and lead spacing requirements are subject to availability and to minimum order requirements. Please contact factory for details. 2. Nickel Barrier Wire option (Suffix 'X2855')Standard parts use Tin-Coated Copper wire. Nickel Barrier Coated Wire is available as an option. This is Copper Wire with a flashing of Nickel, followed by a top coat of Tin. To order please add suffix 'X2855' to end of standard part number. Contact factory for more details if required. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. (c) 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/01/18