Raychem Specification Control Drawing Thermofit Division Europe a) Part as supplied. - A DIA - TCFS*%*%% _Q*%*_ 2 SCH AN NAAN ON NAN CONDUCTIVE HOT-MELT ADHESIVE a - - x J DIA HOT-MELT ADHESIVE b) Part after unrestricted recovery. HEAT RECOVERABLE SCREEN KITS TO INCLUDE CLEANING TISSUE, 4 PIECE 100 GRIT EMERY CLOTH & 14 PIECE OF ATUM. KIT TO BE USED IN CONJUNCTION WITH TCFS INSTALLATION PROCEDURE. Dimensions (in millimetres) A M A/F L p JO PART No. min min max THREAD Nut NOM 10% Ref a b b b TCFS-12 7.4 8 5.0 Mie x 1.5 17 24 50 15 TCFS-16 10.14 13 6.0 M16 x 1.5 22 2g 65 17 TCFS-20 14.1 415 7.2 Me0 x 1.5 27 34 77 20 TCFS-24 419.1 19 8.5 Me4 x 1.5 30 38 90 25 TCFS-30 24.4 24 10.0 M30 x 1.5 36 47 115 30 TCFS-36 30.4 33 15.8 M36 x 1.5 41 52 140 30 Copyright (!) Urheberrechte The copyright in this drawing is the property of Raychem Ltd.The drawing is issued on condition that it is not copied, reproduced or disclosed to a third party, either in whole or in part without the prior written consent of Raychem Ltd. Drawn A.LILLEY. Approval Desi Ae utes Checked AG Issue Date November 1992 Conforms to ISO Recommendations rl 3rd Angle Projection Not to Scale f=H@)E.C.R. Iss. Date No. Details of Change e |}February 1987] 5028 ADHESIVE CHANGED 3 |January 1989 |5438 Ja CHANGED 4 October 1991 |H0044 L was 4 5 |November 1992]H0125 S/S 30 L WAS 48 Material (-25) DIESEL RESISTANT ELASTOMER Part Numbering System. TCFS#-*-0%*-25CH THREAD LENGTH (20mm standard) (5mm increments) FEEDTHROUGH MATERIAL/FINISH 49B Aluminium alloy plated cadmium olive drab over electroless nickel 19C Aluminium alloy plated electroless nickel 62C Stainless steel plated electroless nickel FEEDTHROUGH SIZE Raychem Thermofit Division, Europe, Swindon, Wiltshire, England. Telephone: (0793) 528171 Fax: 697923