)SUNON [sercimcarion FOR srrnovat CUSTOMER DESCRIPTION DIMENSIONS MODEL EIN APPROVED NO APPROVED BY (AUTHORIZED) DAWN.}| Chcahad 2/7 \CHKD. 4 DC BRUSHLESS FAN 60X60X15 mm KD1206PHBI1 H SPEC.NO D601125 ISSUE DATE 02.01.2001 EDITION 0 REVISE DATE E.SPEC ED60224 EH ROARS Al SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. 12FL., 120 CHUNG CHENG IST RD., KAOHSIUNG, TAIWAN, R.0.C.> TEL:886-7-7163069(41 LINES) FAX:886-7-7163086~89SUNON DC BRUSHLESS FAN MODEL: KD1206PHB1 P/N > H | CHARACTERISTICS) 1. Motor Design : Patented single-coil DC brushless 4 poles motor design. 2. Insulation Resistance : More than 500M ohm between internal stator and lead wire(+) measured by DC 500V. 3. Dielectric Strength . : Applied AC 500V for one minute or AC 600V for 2 seconds between housing and lead wire(+) 4, Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with microphone at a distance of one meter _ from the fan intake. 3. Input power, Current & Speed : Measured after continuous 30 minutes operation at rated voltage in clean air at ambient temperature of 25 degrees C. 6. Tolerances : +15% on rated power and current. 7. Motor Protection : Locked rotor protected. 8. Air Performance : Measured by a double chamber. The value are recorded when the fan speed is stabilized at rated voltage. ae | we ke ete SRT 4B SSA SPEC.NO D601125 REVISE D pol aR OR gs SUNONWEALTH ELECTRIC ISSUE DATE] 02.01.2001 |E DITI IN He, 7 ik MACHINE INDUSTRY CO.,LTD.| PAGE 2 OF 6SUNON SPECIFICATIONS MODEL: KD1206PHBI1 P/N 7H 1-1. Rated Voltage 1-2. Operating Voltage Range 1-3. Starting Voltage 1-4. Rated Speed 1-5. Air Delivery 1-6. Static Pressure 1-7. Rated Current 1-8. Rated Power 1-9. Noise Level 1-10. Direction of Rotation 1-11. Operating Temperature 1-12. Storage Temperature 1-13. Bearing System | 1-14. Weight 1-15. Safety 1-16. Vibration 12 VDC 5-13.8 VDC 5 VDC 4300 RPM + 500 RPM 21 CFM 0.18 Inch-H20 0.15 AMP 1.8 WATTS 37.5 dB(A) Counter-clockwise viewed front fan blade -10 to +70 Deg.C -40 to +70 Deg.C Precise ball bearing system 39 g UL/CUR/TUV/CE Approvals Vibration of acceleration 1.5G and Frequency 5~50~5Hz is applied in the 3 directions(X,Y,Z) for 30 minutes, each Direction at the cycle of 1 minute. BERR LRG AR Al SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO D601125 | REVISE D ISSUE DATE| 02.01.2001 JE DITYO 05 qn0774 pol, q + PAGE 3 OF 6 \ ct = ; VTESUNON MODEL : KD1206PHB1 P/N :H PERFORMANCE CURVES STATIC PRESSURE mm-E20. Inch-H20 0.20 0.10 0.56 1.12 CEM m/mi n EE RR LAR SRG Al SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO D601125 REVISE ISSUE DATE 02. 01. 2001 EDITI PAGE 4 OF 6SUNON MATERIAL 2-1. Frame 2-2. Impeller 2-3. Bobbin 2-4. Lead Wire | DIMENSIONS Thermoplastic PBT of UL 94V-0 Thermoplastic PBT of UL 94V-0 Thermoplastic PBT of UL 94V-0 UL2468,26AWG,+RED;-BLACK 4-843 SUNON UL2468 #26AWG BLACK +RED~:BLACK RED 540.3 i 300450 5010.3 60+0.5 1.Air Flow Direction: Label side. 2.The Best Mounting Direction: In any orientation. 440.3 AIR FLOW Es BERR LER AIR Al SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. SPEC.NO D601125 ISSUE DATE] 02. 01. 2001 PAGE 5 OF 6SUNON 1, SUNON will not guarantee the products if the application of our products is exceeded the limitation which is specified on this specification. 2. In case of change of the specification specified on this document, a written notice is requested in advance. 3. Please do not touch the impeller with pressure and never bring the fan with lead wire. The bearings and lead wire may be damaged. 4. No guarantee on the products against the safety problem or failure caused by powder dust, drop of water or insect. 5. If there is any data or related documentation different from this data sheet, this data sheet is the principal reference. 6. For the purpose of MIS, please indicate SPEC No. on every order. 7. In case of the fan has no polarity protection function, wires with same color (electrode) must be connected together during the assembly. (i.e. red + red, black + black) or the fan will be damaged immediately. 8. Please do not use the fan in the environment of corrosive gas or liquid or any detrimental gas. ~ 9. Please do not store the fan in the environment of high / low temperature, high humidity or any detrimental gas. Please store the fan within 6 months, every 6 months, there shall be a linkage of electric current to the fan, even though the fan is stored in room temperature. 10.While the fan is in operation, please do not lock the fan intentionally for a long period of time, since the continuous stoppage will result in over-heat and damage of the fan. 11.During the installation of the fan, please pay substantial attention to possible noise cause by resonance vibration and vibration. 12.During the testing of the fan, please be sure to use finger guard to insure safety. 13.Unless otherwise specified, if there is any doubt in the judgement, the temperature and relative humidity range of environment will be take in according to the standard test condition as 25C and 65%. eee RE yeh x. BeBe TSR OaRAR SPEC.NO D601125 |REVISE DAE SUNONWEALTH ELECTRIC ISSUE DATE] 02.01.2001 [E DITION MACHINE INDUSTRY CO.,LTD.! PAGE 6 OF 6 2,10