Product Overview NCP1851: Smallest 1.6A High Innovation Switching Battery Charger For complete documentation, see the data sheet Product Description The NCP1851 is a fully programmable single cell Lithium-ion switching battery charger optimized for charging from a USB compliant input supply and AC adaptor power source. The device integrates a synchronous PWM controller, power MOSFETs, and the entire charge cycle monitoring including safety features under software supervision. An optional battery FET can be placed between the system and the battery in order to isolate and supply the system. The NCP1851 junction temperature and battery temperature are monitored during charge cycle, and both current and voltage can be modified accordingly through I2C setting. The charger activity and status are reported through a dedicated pin to the system. The input pin is protected against overvoltages. Features * * * * * * * * * * 1.6A buck converter with integrated pass devices Input current limiting to comply to USB standard 500mA boosted supply for USB OTG peripherals Dynamic power path with external battery FET High accuracy voltage and current regulation Input over voltage protection up to +28V Reverse leakage protection prevents battery discharge Protected USB Transceiver supply switch Factory mode Battery temperature sensing for safe operation (JEITA) Applications End Products * High Efficiency Charging Line-up * * * * Smart Phone Handheld Devices PDA Tablets Part Electrical Specifications Product Compliance Status Type NCP1851FCCT1G Pb-free NEW Li-Ion/Polymer 1 Halide free Number of VCC Min (V) Cells Charged 3.6 VCC Max (V) ID Max (uA) Features Package Type 28 5 Max. Charge Current 1.6A Flip-Chip-25 Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 5/18/2012