SPECIFICATIONS:
Models: XD150W-XX, XD150W-XXF, XD150W-XXM
ATTENUATORS
7/16 - DIN, up to 4 GHz, 150 Watts
XD150W-ATT: REV H
Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only.
Design, specifications are subject to change without notice. Contact factory for technical
specifications before purchasing and/or use.
Surface
3.46 [87.9]
SQ.
TYPICAL
END VIEW
may be Added to this
Custom Mtg. hole Config.
Allow for Free Air Flow Around fins to Assure
Units must be Mounted in such a way as to
Performance
Pictured
Male/Male Connectors
Female/Female Connectors
Model Number:
Model Number:
XD150W-XXM
XD150W-XXF
Male/Female Connectors
Length: 7.41 ±.08 [188.2 ±2.0]
Model Number: XD150W-XX
Note: Units are Unidirectional, Therefore Input Connector MUST be specified & will be Indicated on Unit
Length: 7.55 ±.08 [191.8 ±2.0]
Length: 7.27 ±.08 [184.7 ±2.0]
XD150W-XXYModel Number:
HOW TO ORDER:
DC - 4 GHz, 30 dB; 7/16 - DIN, Male/Fem
Model Number:
Model Number:
DC - 2.5 GHz, 3 dB; 7/16 - DIN, Fem/Fem
DC - 2.5 GHz, 20 dB; 7/16 - DIN, Male/Male
Connector Configuration
= Male/Female
M = Male/Male
F = Fem/Fem
2D150W-3F
2D150W-20M
Ordering Examples:
Model Number: 4D150W-30
dB Value
Freq. Range
2 = DC - 2.5 GHz
4 = DC - 4 GHz
Mechanical:
Electrical:
Mates with DIN 47 223
Derated Linearly to 30 Watts @ +125 C
(5uSec Pulse, .05% Duty Cycle)
o
Silver or White Bronze Plated Beryllium Copper
-54°C to +125°C
Anodized Aluminum
Silver or White Bronze Plated Brass
50 Ohms
2 kW Max.
150 Watts Avg. @ +25°C
DC - 4.0 GHz
Attenuation Accuracy
Operating Temp Range
Housing
7/16 - DIN Connectors
Conductors
Peak Power
Input Power
Impedance
Input VSWR
Frequency Range
3&6dB
10&20dB ±1.0dB
±1.5 dB
Standard dB Values* 3, 6, 10, 20, 30 & 40 dB
DC - 1.5 GHz 2.5 - 3 GHz
±0.50 dB
±0.50 dB
Standard Freq. Values 2.5 & 4 GHz
1.40:1 Max.1.15:1 Max.
1.5 - 2.5 GHz
1.30:1 Max.
±1.0 dB
±0.75 dB
30&40dB ±0.75 dB ±1.5 dB±1.0 dB
Aeroflex / Inmet, Inc. 300 Dino Drive, Ann Arbor, MI 48103 • U.S.A.
888-244-6638 or 734-426-5553 FAX: 734-426-5557
www.aeroflex.com/inmet • inmetsales@aeroflex.com
•
•
4.965 ±.025
[126 .00 ±0.64]
8-32UNC-2B TAP
x .50 [12.7] DP.
4.125 [105]
1.75
[44.5]
7.41 ±.08
[188.2 ±2.0]
.23 [5.8]
M4x0.7TAP
x .50 [12.7] DP.
2x Ø1.98
[50.3]
INPUT
