OV495 lead free available in a lead-free package companion HDR image processor for automotive applications product brief High Performance Image Signal Processor Companion Chip for Automotive Imaging OmniVision's OV495 is an image signal processor (ISP) companion chip that pairs with OmniVision's family of automotive RAW image sensors for advanced automotive imaging applications. The OV495 enables electronic distortion and perspective correction without video compression artifacts, making it an ideal ISP solution for next generation rear view camera and camera monitor system (CMS) applications. The OV495 is compatible with OmniVision's OX03A, OX02A, OV2775, OV10650, and OV10640 automotive image sensors. The OV495 can process video streams of up to 2 megapixels in resolution at a maximum of 60 frames per second (fps), with distortion and perspective correction to enable different viewing modes and angles. The OV495 also supports overlay capability for features, such as parking guidance, to enable highperformance vision systems. The OV495 comes in an AEC-Q100 Grade 2 qualified 7 x 7 mm BGA package and contains an advanced set of safety mechanisms to enable ASIL rated camera systems. Find out more at www.ovt.com. OV495 Applications Rear View Camera E-Mirror Surround View System Camera Monitoring System (CMS) Ordering Information Product Features OV00495-U69G-2C (lead-free) 169-pin BGA, packed in tray AEC-Q100 grade 2 qualified OV00495-U69G-TC (lead-free) 169-pin BGA, packed in tape and reel SCCB master/slave interface for sensor and ASIC configuration advanced 150Mp/s throughput ISP for high quality image capturing and video streaming local and global tone mapping support supports four-wire or two-wire serial interface to retrieve stored firmware from external memory devices, such as EEPROM up to 3-capture HDR combination on-chip PLL to generate internal clocks supports distortion correction (DC) / perspective correction (PC) up to 190 degrees on-chip voltage regulator 1.8V to 1.1V supports four independent layers, line and global Product Specifications power supply: - core: 1.1V 5% - I/O: 1.8V 5% or 3.3V 5% brown-out detection circuit and output flag temperature range: - operating: -40C to +105C ambient temperature and -40C to +125C junction temperature package dimensions: 7 mm x 7 mm supports 2x2 lane MIPI RX/TX and 1x4 lane MIPI RX/TX transparency control for each layer, 32 color/palette per image and sizes up to 1080p overlay supports 12-bit DVP input, shared with MIPI RX (1.2 Gbps/lane) on-chip DDR supports 12-bit DVP output, shared with MIPI TX embedded information including frame counter, temperature, and register data supports 24-bit DVP output, for each image to enable critical shared with BT1120 output automotive safety applications embedded 32-bit RISC processor for auto white balance (AWB) high performance and flexibility automatic exposure control (AEC) / automatic gain control (AGC) supports 1K bits of one-time programmable memory (OTP) supports statistics data of up to four user programmable ROIs JTAG boundary scan Functional Block Diagram SPI flash OV495 sensor DVP IN sensor MIPI RX IDC SCCBM0 SCCBM1 UART I/F SPI I/F brown out load HDR ISP OSD DDR2 DC/PC embedded line 32-bit RISC CPU AWB boot ROM AEC FSIN0 FSIN1 tone mapping 4275 Burton Drive Santa Clara, CA 95054 USA Version 1.7, April 2019 Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com DVP OUT sensor MIPI TX sensor NTSC video PLL PRAM JTAG sensor SCCBS firmware temperature sensor BT1120 regulator OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision and the OmniVision logo are registered trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners. SDA/SCL XCLK 6 ~ 36 MHz