Q SERIES O8mm (.315") Panel Mount LED Indicators Distinctive features and specification VOY1603R3US Features * 8mm panel mounting LED indicator * 5mm colored diffused epoxy lens or 5mm water clear super bright LEDs * Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body * Prominent, recessed and flush bezel styles * 2VDC - 220VAC * (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations (2.0 x 0.5) solder lug/faston terminals on tricolor versions * IP67 sealing option (EN60529) * Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA Max Reverse Voltage: 5V Viewing Angle: 30-100 (dependant on model) Life Expectancy: 100,000 hours Temperature Range: -40 to +85C (operating & storage) Torque: 20 to 25cNm O 8.00 +0.15/-0.0 PANEL CUTOUT 10,00 0,394 AF 2,00 0,079 M8 x 0,75 THREAD Standard LED Intensity Prominent and Recessed Flush Forward Voltage HE Red 80mcd 8mcd 2.0V Green 60mcd 6mcd 2.2V Yellow 50mcd 6mcd 2.1V Blue 1600mcd 50mcd 3.3V White 1600mcd 500mcd 3.3V Orange 60mcd 110mcd 2.2V Bi-color (Typical) (Red/Green) 14/30mcd 15/10mcd 2.0V/2.2V Tri-color (Typical) (Red/Green/Yellow) 60/15/13mcd 15/10/6mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. Super Bright LED HE Red Green Yellow Blue White Orange Prominent and Recessed 5,000mcd 10,000mcd 4,000mcd 2,200mcd 2,500mcd 4,000mcd Flush 1,300mcd 1,200mcd 350mcd 280mcd 950mcd 500mcd Forward Voltage 2.2V 3.3V 2.0V 3.3V 3.3V 2.2V Hyper Bright LED HE Red Green Yellow Orange Prominent and Recessed 6,000mcd 1,900mcd 1,600mcd 2,400mcd Flush 980mcd 300mcd 250mcd 110mcd Forward Voltage 2.2V 3.3V 2.0V 2.2V Luminous intensity will be reduced with lower operating current. Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current. Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. APEM www.apem.com 1 Q SERIES O8mm (.315") Panel Mount LED Indicators Technical Drawings PROMINENT BEZEL 28,75 1,132 5,10 0,201 8,75 0,344 10,50 0,413 20,88 0,822 19,38 0,763 M8x0,75 5,10 0,201 8,75 0,345 10,50 0,413 200,0 +/-10 [7,874 +/-0,393] 5,10 0,201 8,75 0,344 12,50 0,492 SHORT BODY SOLDER LUG/FASTONS 18,00 0,709 16,50 0,650 EXTENDED SHORT BODY SOLDER LUG/FASTONS M8x0,75 2,8x0,8 [0,11x0,031] 5,10 0,201 8,75 0,344 12,50 0,492 200,0 +/-10 [7.874+/-0,393] 9,50 0,374 9,50 0,374 M8x0,75 9,50 0,374 9,50 0,374 5,10 0,201 8,75 0,344 12,50 0,492 SHORT BODY PINS REAR EPOXY WIRES SHORT BODY WIRES M8x0,75 200,0+/-10 [7,874+/-0,393] 5,10 0,201 8,75 0,344 22,50 0,886 0,50 0,020 1,25 0,049 1,25 0,049 9,50 0,374 REAR EPOXY PINS M8x0,75 9,50 0,374 8,00 0,315 6,50 0,256 22,50 0,886 2,8x0,5[0.11x0.019] M8x0,75 10,00 0,394 9,35 0,368 5,10 0,201 8,75 0,344 15,50 0,610 10,00 0,394 9,35 0,009 0,50 0,020 1,25 0,049 1,25 0,049 5,10 0,201 8,75 0,344 9,50 ,374 10,00 0,394 9,35 0,368 5,10 0,201 8,75 0,344 M8x0,75 M8x0,75 2,8x0,8[0,11x0,031] 0,50 0,020 1,25 0,049 1,25 0,049 M8x0,75 WIRES PINS 9,50 0,374 9,50 0,374 SOLDER LUG/FASTONS RECESSED BEZEL 25,50 1,004 31,75 1,250 9,50 0,374 2 200,0+/-10 [7,874+/-0,393] SHORT BODY SOLDER LUG/FASTONS 9,50 0,374 M8x0,75 2,8x0,8[0,11x0,031] 9,50 0,374 3,00 0,118 8,75 0,344 15,50 0,610 200,00 +/-10 [7,874+/-0,393] 9,50 0,374 SHORT BODY PINS M8x0,75 3,00 0,118 8,75 0,344 13,50 0,531 SHORT BODY WIRES M8x0,75 200,00+/-10 [7,874+/-0,393] 3,00 0,118 8,75 0,344 15,50 0,610 18,00 0,709 16,50 0,650 EXTENDED SHORT BODY SOLDER LUG/FASTONS 2,8x0,5[0.11x0.019] M8x0,75 20,00 0,787 18,50 0,728 M8x0,75 0,50 0,020 1,25 0,049 1,25 0,049 9,50 0,374 3,00 0,118 8,75 0,344 13,50 0,531 3,00 0,118 8,75 0,344 25,50 1,004 REAR EPOXY WIRES REAR EPOXY PINS M8x0,75 8,00 ,315 6,50 0,256 0,50 0,020 1,25 0,049 1,25 0,049 3,00 0,118 8,75 0,344 M8x0,75 9,50 0,374 10,00 0,394 9,35 0,368 9,50 0,374 3,00 0,118 8,75 0,344 WIRES M8x0,75 2,8x0,8[0,11X0,393] 0,50 0,020 1,25 0,049 1,25 0,049 M8x0,75 PINS 9,40 0,370 9,40 ,370 SOLDER LUG/FASTONS 3,00 0,118 8,75 0,344 15,50 0,610 10,00 0,394 9,35 0,368 www.apem.com 3,00 0,118 8,75 0,344 18,50 0,728 10,00 0,394 9,35 0,368 APEM Q SERIES O8mm (.315") Panel Mount LED Indicators Technical Drawings FLUSH BEZEL 33,85 1,333 1,00 0,039 8,75 0,344 9,50 0,374 1,00 0,039 8,75 0,344 15,60 0,614 200,0+/-10 [7,874+/-0,393] SHORT BODY SOLDER LUG/FASTONS 9,50 0,374 2,8x0,8[0,11x0,031] M8x0,75 200,0+/-10 [7,874+/-0,393] 1,00 0,039 8,75 0,344 17,60 0,693 M8x0,75 18,00 0,709 16,50 0,650 EXTENDED SHORT BODY SOLDER LUG/FASTONS 2,8x0,5[0.11x0.019] M8X0,75 9,50 0,374 9,50 0,374 9,50 0,374 M8x0,75 SHORT BODY WIRES M8x0,75 SHORT BODY PINS 9,50 0,374 20,00 0,787 18,50 0,728 200,0 +/-10 [7.874+/-0,393] 27,60 1,087 REAR EPOXY WIRES 0,50 0,020 1,25 0,049 1,25 0,049 9,50 0,374 M8x0,75 1,00 0,039 8,75 0,344 15,60 0,614 APEM 1,00 0,039 8,75 0,344 27,60 1,087 REAR EPOXY PINS 1,00 0,039 8,75 0,344 17,60 0,693 8,00 0,315 6,50 0,256 0,50 0,020 10,00 0,394 9,35 0,368 1,25 0,049 1,25 0,049 1,00 0,039 8,75 0,344 M8x0,75 M8x0,75 0,50 0,020 1,25 0,049 1,25 0,049 2,8x0,8[0,11x0,031] WIRES PINS 9,50 0,374 M8x0,75 9,50 0,374 SOLDER LUG/FASTONS 1,00 0,039 8,75 0,344 17,60 0,693 10,00 0,394 9,35 0,368 www.apem.com 1,00 0,039 9,75 0,384 21,60 0,850 10,00 0,394 9,35 0,368 3 Q SERIES O8mm (.315") Panel Mount LED Indicators Overview STANDARD OPTIONS The Q8 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 8 P 8 G XX Y 12 E SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING Q 8 = O8mm 1 = Solder Lug/ Fastons (2.8 x 0.8) C = Bright Chrome XX = Fixed Light R = Red 02 = no resistor* (Blank) = Unsealed R = Recessed B = Black Chrome G = Green 06 = 6VDC E = IP67 F = Flush 2 = Pins G = Satin Grey KK = Flashing Light (12V - 28VDC) YY = Bi-color B = Blue ZZ = Tri-color W = White P = Prominent 3 = Wires 4 = Rear epoxy Pins Y = Yellow O = Orange 5 = Rear epoxy Wires 12 = 12VDC 12A = 12VAC/DC 24 = 24VDC 24A = 24VAC/DC HR = Hyper Bright Red 28 = 28VDC HG = Hyper Bright Green 28A = 28VAC/DC HY = Hyper Bright Yellow 7 = Short body Wires 110 = 110VAC HO = Hyper Bright Orange 220 = 220VAC 8 = Short body Lug/ Fastons (2.8 x 0.8) SR = Super Bright Red 6 = Short body Pins SG = Super Bright Green 9 = Extended short body solder Lug/ Fastons (2.8 x 0.5) SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White SO = Super Bright Orange RG = Red/Green Example Q8P3CXXY02E O8mm, prominent bezel, 200mm wire termination bright chrome finish, fixed light, yellow 2VDC LED, IP67 panel sealed RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/Green * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternative voltages consult APEM * Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced - Bi-colors are available up to 28VDC. [AC products not available] * Take care when soldering to the Faston terminals (recommended solder temperature 300C - 3 sec) * Terminal options 6,7 & 9 are only available up to 28V (DC Only) tri-color not available with terminal 9 * Terminal code 8 is only available without integral resistor * Maximum panel thickness 7mm * We recommend using Hyperbright orSuperbright LEDs for use at 110VAC and 220VAC * The Tri-color LED has red and green LEDs when both are connected yellow is produced * Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) * Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode * Tri-color pins are center (-) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red * = For resistorless versions (02) please refer to the forward voltage on page 1 4 www.apem.com APEM