FEATURES
•Highest CV in Standard EIA Size
•Extremely Low ESR
•Operating Temperature: -55˚C to 125˚C
•Polymer Cathode Technology
•High Frequency Capacitance Retention
•Non-Ignition Failure Mode
•Capacitance: 150 to 1500 F
•Voltage: 2.5V to 10V
•Molded Case (pick-and-place precision)
•100% Accelerated Steady State Aging
•100% Surge Current Testing
•Utilizes Multiple Tantalum Anode Technology
•Volumetric Efficiency
•Use Up to 90% of Rated Voltage (10% Derating)
•Self-Healing Mechanism
•True SMT Capability
•RoHS Compliant/Lead Free
CONDUCTIVE POLYMER CHIP CAPACITORS
T530 SERIES - High Capacitance/Ultra-Low ESR
Conductive Polymer Surface Mount
T530 RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert lead material designation from ordering information on page 56. Higher voltage
ratings and tighter tolerance product may be substituted within the same size at KEMET’S option. Voltage substitutions will
be marked with the higher voltage rating.
OUTLINE DRAWINGS
DIMENSIONS - MILLIMETERS (INCHES)
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
(1) To complete KEMET Part Number, insert lead material designation from ordering information on page 57. Higher voltage ratings and tighter tolerance product
may be substituted within the same size at KEMET's option. Voltage substitutions willl be marked with the higher voltage rating.
w/'T= 20°C
@ -55°C to
105°C
w/'T= 2°C
@ 125°C
470.0 D T530D477M2R5A(1)E005 118µA 8.0 5.0 7.1 2.3
470.0 D T530D477M2R5A(1)E006 118µA 8.0 6.0 6.5 2.1
470.0 D T530D477M2R5A(1)E010 118µA 10.0 10.0 5.0 1.6
560.0 D T530D567M2R5A(1)E005 140µA 8.0 5.0 7.1 2.3
680.0 Y T530Y687M2R5A(1)E005 170µA 8.0 5.0 7.2 2.3
680.0 Y T530Y687M2R5A(1)E006 170µA 8.0 6.0 6.6 2.1
680.0 D T530D687M2R5A(1)E006 170µA 8.0 6.0 6.5 2.1
680.0 D T530D687M2R5A(1)E010 170µA 8.0 10.0 5.0 1.6
680.0 X T530X687M2R5A(1)E006 170µA 8.0 6.0 6.7 2.1
1000.0 Y T530Y108M2R5A(1)E005 250µA 8.0 5.0 7.2 2.3
1000.0 Y T530Y108M2R5A(1)E006 250µA 8.0 6.0 6.6 2.1
1000.0 X T530X108M2R5A(1)E004 250µA 8.0 4.0 8.2 2.6
1000.0 X T530X108M2R5A(1)E005 250µA 8.0 5.0 7.3 2.3
1000.0 X T530X108M2R5A(1)E006 250µA 8.0 6.0 6.7 2.1
1500.0 X T530X158M2R5A(1)E005 375µA 8.0 5.0 7.3 2.3
470.0 D T530D477M003A(1)E010 141µA 8.0 10.0 5.0 1.6
680.0 D T530D687M003A(1)E010 204µA 8.0 10.0 5.0 1.6
1000.0 X T530X108M003A(1)E010 300µA 8.0 10.0 5.2 1.6
1500.0 X T530X158M003A(1)E008 450µA 8.0 8.0 5.8 1.8
330.0 D T530D337M004A(1)E005 132µA 8.0 5.0 7.1 2.3
330.0 D T530D337M004A(1)E006 132µA 8.0 6.0 6.5 2.1
470.0 D T530D477M004A(1)E006 188µA 8.0 6.0 6.5 2.1
470.0 D T530D477M004A(1)E010 188µA 8.0 10.0 5.0 1.6
470.0 Y T530Y477M004A(1)E005 188µA 8.0 5.0 7.2 2.3
470.0 Y T530Y477M004A(1)E006 188µA 8.0 6.0 6.6 2.1
680.0 Y T530Y687M004A(1)E005 272µA 8.0 5.0 7.2 2.3
680.0 X T530X687M004A(1)E004 272µA 8.0 4.0 8.2 2.6
680.0 X T530X687M004A(1)E005 272µA 8.0 5.0 7.3 2.3
680.0 X T530X687M004A(1)E006 272µA 8.0 6.0 6.7 2.1
680.0 X T530X687M004A(1)E010 272µA 8.0 10.0 5.2 1.6
1000.0 X T530X108M004A(1)E006 400µA 8.0 6.0 6.7 2.1
KEMET Part Number DCL
VR
DF %
120Hz
ESR
m:@100
kHz 25°C
Max
Ripple Current (Arms)
@ 100 kHz
2.5 Volt Rating at 105°C (1.7 Volt Rating at 125°C)
3 Volt Rating at 105°C (2 Volt Rating at 125°C)
4 Volt Rating at 105°C (2.7 Volt Rating at 125°C)
Capaci-
tance
µF
Case
Size
56
W
K
X
CATHODE (-) END
VIEW
SIDE VIEW ANODE (+) END
VIEW
T
G
SS
B
B
HH
BOTTOM VIEW
E F
A
L
Termination
cutout at
KEMETs
Option,
either end
R
P
KEMET EIA
D 7343-31 7.3 ± 0.3 4.3 ± 0.3 2.8 ± 0.3 2.4 1.3 0.10 ± 0.10 0.13 3.8 3.5 3.5
Y 7343-40 7.3 ± 0.3 4.3 ± 0.3 4.0 max 2.4 1.3 0.10 ± 0.10 0.13 3.8 3.5 3.5
X 7373-43 7.3 ± 0.3 4.3 ± 0.3 4.0 ± 0.3 2.4 1.3 0.10 ± 0.10 0.13 3.8 3.5 3.5
T (Ref) A (Min) G (Ref) E (Ref)F ±0.1 S ±0.3 X (Ref)
Case Size LWH
Rated
V
oltage
(V)
Rated
Capaci-
tance
(μF)
Case Code/
Case Size KEMET Part Number
DC
Leakage
µA @
20°C max/
5min
DF% @
20°C
120 Hz
Max
ESR
mΩ @
20°C
100 kHz
Max
Maximum
allowable
ripple current
(mArms)
100kHz*
MSL
Reflow
Temp
≤ 260ºC
470 D/7343-31 T530D477M2R5A(1)E005 118 8.0 5.0 7100
470 D/7343-31 T530D477M2R5A(1)E006 118 8.0 6.0 6500
470 D/7343-31 T530D477M2R5A(1)E010 118 10.0 10.0 5000
560 D/7343-31 T530D567M2R5A(1)E005 140 8.0 5.0 7100
680 Y/7343-40 T530Y687M2R5A(1)E005 170 8.0 5.0 7300
680 Y/7343-40 T530Y687M2R5A(1)E006 170 8.0 6.0 6600
680 D/7343-31 T530D687M2R5A(1)E006 170 8.0 6.0 6500
680 D/7343-31 T530D687M2R5A(1)E010 170 8.0 10.0 5000
680 X/7343-43 T530X687M2R5A(1)E006 170 8.0 6.0 6700
1000 Y/7343-40 T530Y108M2R5A(1)E005 250 8.0 5.0 7300
1000 Y/7343-40 T530Y108M2R5A(1)E006 250 8.0 6.0 6600
1000 X/7343-43 T530X108M2R5A(1)E004 250 8.0 4.0 8200
1000 X/7343-43 T530X108M2R5A(1)E005 250 8.0 5.0 7300
1000 X/7343-43 T530X108M2R5A(1)E006 250 8.0 6.0 6700
1500 X/7343-43 T530X158M2R5A(1)E005 375 8.0 5.0 7300
470 D/7343-31 T530D477M003A(1)E010 141 8.0 10.0 5000
680 D/7343-31 T530D687M003A(1)E010 204 8.0 10.0 5000
1000 X/7343-43 T530X108M003A(1)E010 300 8.0 10.0 5200
1500 X/7343-43 T530X158M003A(1)E008 450 8.0 8.0 5800
330 D/7343-31 T530D337M004A(1)E005 132 8.0 5.0 7100
330 D/7343-31 T530D337M004A(1)E006 132 8.0 6.0 6500
470 D/7343-31 T530D477M004A(1)E006 188 8.0 6.0 6500
470 D/7343-31 T530D477M004A(1)E010 188 8.0 10.0 5000
470 Y/7343-40 T530Y477M004A(1)E005 188 8.0 5.0 7300
470 Y/7343-40 T530Y477M004A(1)E006 188 8.0 6.0 6600
680 Y/7343-40 T530Y687M004A(1)E005 272 8.0 5.0 7300
680 X/7343-43 T530X687M004A(1)E004 272 8.0 4.0 8200
680 X/7343-43 T530X687M004A(1)E005 272 8.0 5.0 7300
680 X/7343-43 T530X687M004A(1)E006 272 8.0 6.0 6700
680 X/7343-43 T530X687M004A(1)E010 272 8.0 10.0 5200
1000 X/7343-43 T530X108M004A(1)E006 400 8.0 6.0 6700
3
3
32.5
3
4
Rated
V
oltage
(V)
Rated
Capaci-
tance
(μF)
Case Code/
Case Size KEMET Part Number
DC
Leakage
µA @
20°C max/
5min
DF% @
20°C
120 Hz
Max
ESR
mΩ @
20°C
100 kHz
Max
Maximum
allowable
ripple current
(mArms)
100kHz*
MSL
Reflow
Temp
≤ 260ºC
220 D/7343-31 T530D227M006A(1)E005 139 8.0 5.0 7100
220 D/7343-31 T530D227M006A(1)E006 139 8.0 6.0 6500
330 D/7343-31 T530D337M006A(1)E006 208 8.0 6.0 6500
330 D/7343-31 T530D337M006A(1)E010 208 8.0 10.0 5000
330 Y/7343-40 T530Y337M006A(1)E005 208 8.0 5.0 7300
330 Y/7343-40 T530Y337M006A(1)E006 208 8.0 6.0 6600
330 Y/7343-40 T530Y337M006A(1)E010 208 8.0 10.0 5100
470 Y/7343-40 T530Y477M006A(1)E005 296 8.0 5.0 7300
470 X/7343-43 T530X477M006A(1)E004 296 8.0 4.0 8200
470 X/7343-43 T530X477M006A(1)E005 296 8.0 5.0 7300
470 X/7343-43 T530X477M006A(1)E006 296 8.0 6.0 6700
470 X/7343-43 T530X477M006A(1)E010 296 8.0 10.0 5200
680 X/7343-43 T530X687M006A(1)E010 428 8.0 10.0 5200
680 X/7343-43 T530X687M006A(1)E018 428 8.0 18.0 3900
150 D/7343-31 T530D157M010A(1)E005 150 8.0 5.0 7100
150 D/7343-31 T530D157M010A(1)E006 150 8.0 6.0 6500
150 D/7343-31 T530D157M010A(1)E010 150 8.0 10.0 5000
220 D/7343-31 T530D227M010A(1)E006 220 8.0 6.0 6500
220 D/7343-31 T530D227M010A(1)E010 220 8.0 10.0 5000
220 Y/7343-40 T530Y227M010A(1)E006 220 8.0 6.0 6600
330 X/7343-43 T530X337M010A(1)E004 330 8.0 4.0 8200
330 X/7343-43 T530X337M010A(1)E005 330 8.0 5.0 7300
330 X/7343-43 T530X337M010A(1)E006 330 8.0 6.0 6700
330 X/7343-43 T530X337M010A(1)E010 330 8.0 10.0 5200
150 X/7343-43 T530X157M016A(1)E015 240 8.0 15.0 4200
150 X/7343-43 T530X157M016A(1)E025 240 8.0 25.0 3300
150 X/7343-43 T530X157M016A(1)E040 240 8.0 40.0 2600
*100kHz to 500kHz, 45º C
3
10
16
3
3
6.3
(1) To complete KEMET part number, insert lead material designation from ordering information on page 57.
Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET's
option. Voltage substitutions will be marked with the higher voltage ratings.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CONDUCTIVE POLYMER CHIP CAPACITORS
T530 SERIES - High Capacitance/Ultra-Low ESR
KMKM
(KM) KEMET
High Capacitance/
Ultra-Low ESR
158
505
Rated
Voltage KEMET ID
Picofarad Code
PWC*
Polarity
Indicator
K3
T530 ORDERING INFORMATION
COMPONENT MARKING
T530X/T510E/T491E 1,000μF
Capacitance vs. Frequency
T530X/T510E/T491E 1,000μF
Impedance & ESR vs. Frequency
T530 SERIES CONSTRUCTION
“505” = The 5th week
of 2005.
RECOMMENDED
TEMPERATURE/VOLTAGE DERATING
Tin/Lead (SnPb 5% Pb minimum)
* S - Not recommended for new design
57
Conductive Polymer Surface Mount
*Pb-free supply is not guaranteed with the ‘S’ termination code.
This termination code not available effective 15 July 2007.
ESR
Expressed in Milliohms
T530 X 158 M 003 A T E008
Tantalum
Series
530 – Multiple Anode Polymer
Case Size
D, X, Y
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros.
Capacitance Tolerance
M = ±20% Voltage
Note: 006 = 6.3
Failure Rate
A = Not Applicable
Lead Material
T = 100% Tin (Sn) Plated*
H = Standard Solder Coated
(SnPb 5% Pb minimum)
G = Gold
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Tape & Reel Packaging
KEMET’s Molded Tantalum and Aluminum Chip
Capacitor families are packaged in 8 mm and 12 mm plastic
tape on 7" and 13" reels, in accordance with EIA Standard
481-1: Taping of Surface Mount Components for Automatic
Handling. This packaging system is compatible with all tape
fed automatic pick and place systems.
Right Hand
Orientation
Only
(+) (–)
Embossed Carrier
Embossment
Top Tape Thickness
.10mm (.004") Max Thickness
8mm ±.30
(.315 ±.012")
or
12mm ±.30
(.472 ±.012") 178mm (7.00")
or
330mm (13.00")
8mm (0.315")
or
12mm (0.472") 180mm (7.0")
or
330mm (13.0")
QUANTITIES PACKAGED PER REEL
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
TANTALUM AND ALUMINUM CHIP CAPACITORS
Packaging Information
Packaging
*Standard reel packaging is not mandatory.
*Bulk packaging also available using C-7610.
92
KEMET EIA
R 2012-12 8 2,500 10,000
I 3216-10 8 3,000 12,000
S 3216-12 8 2,500 10,000
T 3528-12 8 2,500 10,000
M 3528-15 8 2,000 8,000
U 6032-15 12 1,000 5,000
L 6032-19 12 1,000 5,000
W 7343-15 12 1,000 3,000
Z 7343-17 12 1,000 3,000
V 7343-20 12 1,000 3,000
A 3216-18 8 2,000 9,000
B 3528-21 8 2,000 8,000
C 6032-28 12 500 3,000
D 7343-31 12 500 2,500
Y 7343-40 12 500 2,000
X 7343-43 12 500 2,000
E 7260-38 12 500 2,000
Case Code Tape
Width-mm 7" Reel* 13" Reel
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 Newton to 1.0 Newton (10g to 100g)
12 mm 0.1 Newton to 1.3 Newton (10g to 130g)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier
tape shall be 165to 180from the plane of the carrier tape. During peeling, the carrier and/or cover tape
shall be pulled at a velocity of 300 ±10 mm/minute.
3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")
reels (with C-7280). Note that 13” reels are preferred.
4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
Embossed Carrier Tape Configuration: Figure 1
NOTES
1. B1 dimension is a reference dimension for tape feeder clearance only.
2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location and hole location shall be applied independent of each other.
3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require
additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)
4. The cavity defined by A0,B0,and K0shall be configured to surround the part with sufficient clearance such that the chip does not pro-
trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical
restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm
maximum in the pocket (not applicable to vertical clearance.)
Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)
Constant Dimensions — Millimeters (Inches)
Tape Size D0EP
0P2T Max T1Max
8 mm 1.5 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.100
and +0.10 -0.0
12 mm (0.059 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.004)
+0.004, -0.0)
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch B1Max. D1Min. F P1R Min. T2Max W A0B0K0
Note 1 Note 2 Note 3 Note 4
8 mm Single 4.4 1.0 3.5 ±0.05 4.0 ±0.10 25.0 2.5 8.0 ±0.30
(4 mm)
(0.173) (0.039) (0.138 ±0.002) (0.157 ±0.004) (0.984) (0.098) (.315 ±0.012)
12 mm Double 8.2 1.5 5.5 ±0.05 8.0 ±0.10 30.0 4.6 12.0 ±0.30
(8 mm) (0.323) (0.059) (0.217 ±0.002) (0.315 ±0.004) (1.181) (0.181) (0.472 ±0.012)
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
94
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Embossed Carrier Tape Configuration (cont.)
Sketch D: Tape Camber (Top View)
Allowable camber to be 1 mm/250 mm.
250mm (9.843)
1mm (0.039) Max.
1mm (0.039) Max.
Table 2 – REEL DIMENSIONS (Metric will govern)
Figure 3: Reel Dimensions (Metric Dimensions will govern)
Tape Size A Max B* Min C D* Min N Min W1W2Max W3
8 mm 330.0 1.5 13.0 ± 0.20 20.2 50.0 8.4 14.4 7.9 Min
(12.992) (0.059) (0.512 ± 0.008) (0.795) (1.969) +1.5, -0.0 (0.567) (0.311)
See (0.331 10.9 Max
Note 3 +0.059, -0.0) (0.429)
12 mm 330.0 1.5 13.0 ± 0.20 20.2 Table 1 12.4 18.4 11.9 Min
(12.992) (0.059) (0.512 ± 0.008) (0.795) +2.0, -0.0 (0.724) (0.469)
(0.488 15.4 Max
+0.078, -0.0) (0.606)
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
Figure 2:
Tape Leader
& Trailer
Dimensions
(Metric
Dimensions
Will Govern)
400mm (15.75) Min.
20°
95
Packaging
