2-1
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
Table of Contents
Application Equipment
HL1910E/HL2010E Light duty heating tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3, 2-4
ThermoGun HG Medium duty heating tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5, 2-6
CV-1981 and
CV-1983 Heavy duty hot-air heating tool . . . . . . . . . . . . . . . . . . . . . . . . .2-7, 2-8
IR-1891 Heating work station for short length tubing . . . . . . . . . . . . . .2-9, 2-10
Model 81CE Heating oven for large, complex assemblies . . . . . . . . . . . .2-11, 2-12
RBK-ILS- Installation of splice sealing products adjacent to
Processor MKII ultrasonic welder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-13, 2-14
Model 105 Table-top or stand alone tunnel oven . . . . . . . . . . . . . . . . . .2-15, 2-16
Model 16B Table top belt heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-17, 2-18
Model 19 Belt heater for processing a broad range of products . . . . .2-19, 2-20
Model 20 Upgraded belt heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-21, 2-22
VBH-1 Versatile bed heater for large assemblies and substrates . . . . .2-23, 2-24
2-2
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Engineering Notes
2-3
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
HL1910E/HL2010E
Light Duty Heating Tool
Product Facts
Light duty, portable hot air
heater
The HL2010E tool is
switched on and off at the
three-stage switch and the
temperature can be contin-
uously adjusted over a
range of 50°C-630°C by the
pushbuttons. The tempera-
ture can be increased or
reduced by 10°C steps. An
LCD display shows the
actual temperature.
The HL1910E tool is
switched on and off at the
two-stage switch and the
temperature can be contin-
uously adjusted over a
range of 50°C-600°C at the
thumbwheel (the numbers
on it serve as guide only,
1 means 50°C and max.
temperature of 600°C is
attained at 9).
A bench stand allowing use
of both the HL2010E and
the HL1910E as a bench
tool is available as an
option. Only two reflectors
are required to cover most
applications of heat-shrink-
able tubing and SolderSleeve
terminations.
There is an adaptor avail-
able, which allows the use
of PR type reflectors.
The HL2010E and HL1910E
hot air heat guns are
designed to work with a
standard line voltage
(120V) on a wide variety of
Raychem heat-shrinkable
products. These tools are
suitable for occasional use
and are not recommended
for applications requiring
high duty cycles. Both tools
supply forced hot air with
an adjustable heat setting
to meet the requirements of
many different installation
situations. A three position
switch controls the air flow
(150/300/500 l/min)
Available in: Americas Europe Asia Pacific
■■
2-4
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
HL1910E/HL2010E (Continued)
Description Part Number
HL2010E-120V tool: HL2010E-KIT-120V CJ2087-000
HL1910E-120V tool: HL1910E-KIT-120V CJ2086-000
HL2010E/HL1910E Accessories: HL1802E-074616 - SolderSleeve
Terminators Reflector 832011-000
HL1802E-070519 - Heat-Shrinkable
Tubings Reflector 022611-000
HL1802E-ADAPT-PR Adaptor for
PR Series Reflector 444817-000
PR-13C-REFLECTOR 991974-000
PR-25D-REFLECTOR 989523-000
HL2010E-BENCH-STD CJ2085-000
Ordering Information
Technical Specifications Voltage 120V AC
Power 2000W
Air flow 150 - 500 l/min
Weight 920g
Length 280 mm
Noise <70dB
2-5
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
ThermoGun HG
Medium Duty Heating Tool
Product Facts
Stand-mounted or
handheld, rugged unit for
heavy-duty use
Built-in stand and turbo-fan-
driven blower
Adjustable side vents
Adjustable temperature
1680 to 2160 watts
Large reflector size
High heat output for fast
installation
Specifications
Applications
Used for installing molded
parts onto adapters or
harnesses and installing
a broad range of heat-
shrinkable products, includ-
ing boots and tubing up to
three inches in diameter.
Available in: Americas Europe Asia Pacific
■■
Model Power Requirements Input Watts Temperature Range CFM* RPM**
HG-501A 120 V, 60 Hz, 14 A 1680 260°C–399°C [500°F–750°F] 23 1700
HG-502A 230 V, 50/60 Hz, 7 A 1680 260°C–399°C [500°F–750°F] 23 1700
HG-751A-C 120 V, 60 Hz, 18 A 2160 399°C–538°C [750°F–1000°F] 23 1700
HG-752A 230 V, 50/60 Hz, 9 A 1740 399°C–538°C [750°F–1000°F] 23 1700
*CFM = Cubic feet per minute.
**RPM = Revolutions per minute.
2-6
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
ThermoGun HG (Continued)
Model* Housing Color Part No.
HG-501A Red 462047-000
HG-502A Red 389363-000
HG-751A-C Red 926935-000
HG-752A Red 026239-000
Accessories Tubing Application Part No.
A-160-HG standard reflector Diameters up to 19.05 [0.75] 991017-000
A-170-HG large tubing reflector Diameters of 19.05–50.8 [0.75–2] 991018-000
TG-23 small boot reflector Diameters up to 44.5 [1.75] 991026-000
TG-24 large boot reflector 991027-000
*Complete with bench stand.
Ordering Information
Accessories
A-160-HG reflector
(P/N 991017) for short
lengths of tubing up to
19.05 [.75] in diameter.
Must be ordered separately.
A-170-HG reflector
(P/N 991018) for short lengths
of tubing 19.05–50.8 [.75–2]
in diameter.
Must be ordered separately.
TG-23 reflector (P/N 991026)
for boots up to 44.45
[1.75] in diameter.
Must be ordered separately.
2-7
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
CV-1981 and CV-1983
Heavy Duty Hot-Air
Heating Tool
Product Facts
Robust, double-insulated,
heavy-duty unit
Highest-wattage unit
(1600–2260 watts)
Integral stand that allows
use as bench tool
Safe, quiet operation
Precisely variable
temperature
Variety of reflectors
available
Easy fixturing for dual
opposing heating
Specifications
Applications
Used for installing dual wall
or single wall tubing up to
three inches in diameter
and for installing
SolderSleeve devices.
Closed loop version (PID)
also available.
Available in: Americas Europe Asia Pacific
■■
Electrical Supply
CV-1981-MK2 120 V and 230 V
CV-1983 120 V and 230 V
CV-1981 PID 120 V and 230 V
Power Consumption
CV-1981-MK2 1600 W
CV-1983 2260 W/3060 W
CV-1981 PID 1600 W
Total System Noise
CV-1981-MK2 65dB
CV-1983 65dB
CV-1981 PID >70dB
Length
CV-1981-MK2 340 mm [13.4 in]
CV-1983 320 mm [12.6 in]
CV-1981 PID 350 mm [13.8 in]
Weight
CV-1981-MK2 1.3 Kg [2.90 lb]
CV-1983 1.5 Kg [3.30 lb]
CV-1981 PID 1.4 Kg [3.10 lb]
Air Flow
CV-1981-MK2 Max 230 l/min
CV-1983 Max 500 l/min
CV-1981 PID 230 l/min
Product Range
All dual wall, single wall and molded part products.
Various devices products.
For other Raychem products , contact TE.
2-8
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
CV-1981 and CV-1983 (Continued)
Application Part No.
PR-12 reflector Tubing: 6.3–25.4 mm [0.25 in–1 in] 991973-000
PR-13 reflector Tubing: Up to 6 mm [0.25 in] 991963-000
PR-13C reflector Large SolderSleeve products 991974-000
PR-21 reflector Tubing: Up to 25.4 mm [1 in] 991984-000
PR-24 reflector Tubing/molded parts: 25.4–34.93 mm [1 in–1.38 in] 991964-000
PR-24A reflector Tubing/molded parts: 34.93–60.33 mm [1.38 in–2.38 in] 991989-000
PR-25 reflector SolderSleeve products: Up to 7 mm [0.28 in] 991965-000
PR-25D reflector SolderSleeve products: 6.3–12.7 mm [0.25 in–0.50 in] 989523-000
PR-26 reflector Small SolderSleeve products 991967-000
PR-33 reflector SolderSleeve products: 19.05–25.4 mm [0.75 in–1 in] 997768-000
AD-1962 adapter for larger-barrel CV-1983 989172-000
PR-34 reflector SolderSleeve products: 12.0–20.0 mm [0.47 in–0.79 in] 989111-000
PR-51 Special narrow reflector for molded part transitions 113069-000
[21.5 x 3.5 mm nozzle] [.85 in x .14 in]
Accessories
Ordering Information Equipment Description Part No. Voltage Hz
CV-1981-120V1600W-CANMK2 A42716-000* 120V 50/60 Hz
CV-1981-120V1600W-UKMK2 E95798-000 120V 50/60 Hz
CV-1981-230V1600WMK2 813914-000 230V 50/60 Hz
CV-1981-230V1600W-SEVMK2 F25836-000 230V 50/60 Hz
CV-1981-230V1600-UKMK2 340970-000* 230V 50/60 Hz
CV-1983-110V-2260W-UK 441753-000 120V 50/60 Hz
CV-1983-220V-2260W 773898-000 230V 50/60 Hz
CV-1983-220V-2260W-UK 985426-000 230V 50/60 Hz
CV-1983-220V-3060W 538361-000 230V 50/60 Hz
CV-1983-220V-3060W-UK 231866-000 230V 50/60 Hz
CV-1981-120V-1600W-CANPIDF 839218-000 120V 50/60 Hz
CV-1981-120V-1600W-UKPID 928826-000 120V 50/60 Hz
CV-1981-230V-1600WPID 958770-000 230V 50/60 Hz
CV-1981-230V-1600W-SEVPIDF 434366-000 230V 50/60 Hz
CV-1981-230V-1600W-UKPIDF 385828-000 230V 50/60 Hz
AD-1962 989172-000 ——
CV-1981-MK2
CV-1983
CV-1981-PID
CV-1983 Barrel Adapter
*Note: A42716 supersedes and replaces 538005
340970 supersedes and replaces 923002
2-9
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
IR-1891
Heating Work Station for
Short Length Tubing
Product Facts
Automatic cycle start once
heater is manually
positioned over product,
which gives improved
process control
(recommended for adhesive-
lined heat-shrinkable tubing
e.g. sealing applications)
Automatic heating head
retraction at end of cycle
prevents damage to
components
Multiple product fixture
assemblies give increased
process rates
Cooling fan above each
fixture assembly maintains
holding fixture at an
acceptable temperature
before initiating the heating
cycle. The operator then
continues with loading/
unloading the other work
station whilst the heating
cycle is taking place.
The IR-1891-220V-Shuttle-
Retn is provided with
closed loop temperature
control and in addition the
heat head is ‘locked’ into
position by use of an elec-
tromagnet during the heat-
ing cycle.
Once the other workstation
has been loaded and the
first installation is complete,
the heat head is moved into
position over the product
and the next heating cycle
initiated. Heating times vary
typically from 3 to 30
seconds depending on the
size and type of tubing
product. Process rates up
to 1200 pieces/hour can be
achieved depending on the
heating time and the time
taken by the operator to
load and unload the work-
pieces. The installation
temperature/power can be
varied according to product
type/size and required
cycle times.
The heating elements,
which are continuously
energized, are of the infra-
red medium wave length
type and consist of a coiled
resistance wire contained
in quartz glass tubes. The
closed loop temperature
control uses similar elements
but having integral thermo-
couple sensors.
Applications
The IR-1891 is suitable for
the installation of a range of
Raychem heat-shrinkable
tubing products onto a
variety of small components,
e.g. ring terminals, Faston
terminals and small con-
nectors etc. The machine
is provided with two work
stations and a moveable
heating head.
Each workstation is pro-
vided with supports for
tooling fixtures (which must
be specified and ordered
separately). These support
the workpieces and locate
the tubing products. The
operator loads the work-
pieces into the fixtures at
one of the workstations,
ensures that the tubing
product is correctly posi-
tioned and then slides the
heat head into position
Available in: Americas Europe Asia Pacific
2-10
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
IR-1891 (Continued)
Description Part No.
*IR-1891-220V-Shuttle-Retn 289588-000
*IR-1891-220V-Retn-Syl 613148-000
*Note: The descriptions given here DO NOT include the supply of the necessary tooling fixtures.These are designed
for each individual application.
Ordering Information
Description Part No.
Grippers:
IR-1891-SI-GRP-165-RD-1mm Red Gripper with 1mm hole 629602-000
IR-1891-SI-GRP-165-CL-2mm Clear Gripper with 2mm hole 112676-000
IR-1891-SI-GRP-165-BK-3mm Black Gripper with 3mm hole F83221-000
IR-1891-SI-GRP-165-WT-6mm White Gripper with 6mm hole 629602-000
Fixtures:
IR-1891-Quick-Rel-ESS-6/1 ESS Cap (6/1) Fixture 096735-000
IR-1891-Quick-Rel-ESS-8/2 ESS Cap (8/2) Fixture 148597-000
IR-1891-Tool-Fixt-Bas-ESS Base Unit for Fixtures 760221-000
Note: A wider range of tooling fixtures and grippers designed for previous applications are available. Please contact
TE for details.
Accessories
Technical Specifications Electrical Supply 230 V Single Phase
Power Consumption 1600 W
Operating Temperature 650°C max
Process Rate 1200 / hour maximum depending on application and operator
Heating Times 3 to 30 seconds depending on application
System Noise < 70 dB
Dimensions – 508636-000 L1100 x H650 x D500 mm [L43 x H25 x D20 in]
Dimensions – 613148-000 / 167309-000 / 289588-000 L1100 x H900 x D500 mm [L43 x H35 x D20 in]
Base Plate Dimensions 289588-000 / 167309-000 L1040 x D450 mm [L41 x D18 in]
Base Plate Dimensions 613148-000 L1040 x D397 mm [L41 x D16 in]
Product Range Wide range of Raychem tubing products in particular LSTT, RNF-3000, RNF-100, HTAT, ATUM.
Maximum diameter 20 mm [0.8 in] and maximum length 60 mm [2.0 in]
2-11
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
Model 81CE
Discrete Heater for Heat-
Shrinkable Tubing Products
Product Facts
Closed-loop time and
temperature control
Controlled process
Adaptable for different
applications
Bench top design
CE approved for worldwide use
Heater operation and over
temperature alarm lights
into the upper heating ele-
ment connected to a closed
loop temperature controller.
An alarm light illuminates
whenever the actual heat-
ing element temperature
varies from the set point
temperature.
Controlled Oven Dwell Time
The oven dwell time is
selected using a 3-digit
thumb wheel digital timer.
The time can be set
between 1 and 999 sec-
onds for precise heating
ensuring each assembly
being processed sees the
same precise amount of heat.
Minimal Skill Requirements
There are clearly marked
guides for aligning the
assembly as well as the
tubing or device being
processed. The operator
only has to center the
assembly, then the tubing,
and load it into the spring
loaded jaws on either side
of the heating chamber. The
jaws grip and carry the
assembly into the heating
chamber and back to the
home position when the
time has expired. A protec-
tion circuit prevents the
cycle from being initiated if
the oven is not at the
desired set point, prevent-
ing assemblies from being
processed incorrectly. The
small footprint allows the
processor to be placed in
close proximity to a welder,
allowing a single operator
to accomplish two tasks.
Versatility
The processor is designed
to process a broad range of
Raychem heat-shrinkable
tubing products up to
25 mm [1.0 in] in diameter
and 127 mm [5.0 in] in
length. The infrared energy
source is well-suited to effi-
Applications
The Model 81CE is a CE
Certified discrete-type table
top heater which provides a
controlled process for
recovering a wide variety of
Raychem heat-shrinkable
products onto wire assem-
blies or other suitable sub-
strates.
Assemblies are loaded into
spring loaded jaws on
either side of the heating
chamber which takes the
assemblies into the oven for
a pre-set number of sec-
onds, then returns them to
the home position for
removal.
Controlled Heating Zone
The Model 81 CE processor
has two stamped foil heating
elements that are manufac-
tured to a strict wattage
specification. Consistent
temperatures are controlled
by a thermocouple embedded
Available in: Americas Europe Asia Pacific
■■
cient processing of either
single-wall or adhesive-
lined tubing. Temperature
and time can be controlled
to accommodate a wide
variety of products and
substrates.
Safety Features:
• Circuit breaker for current
surges
• Emergency Stop
• Pinch points eliminated
by the housing design
• An over-temperature
switch that shuts off all
power in the event of an
overheat condition
• Automatic cool-down cir-
cuit to prevent heat dam-
age to integral
components
• Circuit to prevent cycle
initiation until the oven is
up to temperature
2-12
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
Model 81CE (Continued)
Electrical Part No. 071965 Part No. 704393-000
Power Requirements 120 VAC, 1, 50/60 Hz, 15 A 220 VAC, 1 , 208-240 VAC, 15 A
Heating elements 2 ea. 400 watt stamped foil with quartz face infrared, one top & bottom
Timing System Eagle Digital Timer, 1 to 999 seconds
Mechanical
Pneumatic cylinder requirement 30 - 40 PSI clean shop air for jaw traversing
Dimensions cm [in.]
Control box dimensions 43.2 cm [17 in] L x 21.6 cm [8.5 in] W x 16.5 cm [6.5 in] H
Control box weight 7.7 Kg [17 lb]
Heating chamber dimensions 38 cm [15 in] L x 24 cm [9.5 in] W x 34.3 cm [13.5 in] H
Heating chamber weight 18 Kg [40 lbs]
Shipping dimensions 61 cm [24 in] x 61 cm [24 in] x 53 cm [21 in]
Shipping weight 41 Kg [90 lbs]
Tubing sizes
Inside diameter Up to 25 mm [1 in]
Length Up to 127 mm [5 in]
Version Description Part No.
Model 81CE -120 Volt CLTEQ-M81CE-120V-HTR 071965-000
Model 81CE - 220 Volt CLTEQ-M81CE-240V-HTR 704393-000
Specifications and
Dimensions
2-13
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
RBK-ILS-Processor MkII
Installation of Splice
Sealing Products Adjacent
to Ultrasonic Welder
Product Facts
Increased heating
element life
Installation times,
temperatures and product
size information (individual
selection)
Sequenced installations
Operator key lock/password
protection levels
Automatic heater retraction
on mains failure
Automatic calibration (single
cycle)
RS232 interface allows
time, temperature and
product sizes for the next
installation to be transferred
from a remote machine (e.g.
an ultrasonic welding tool)
Machine hours and
installation cycle counters
Software upgradeable to
support special applications
Air cooling can be provided
to an optional stub splice
fixture in the RBK-Proc-Mk2-
Proc-Aircool version
Automatic communication
with upstream ultrasonic
welder can allow time
and temperature to be
automatically set without
operator intervention.
The operator is able to
efficiently load both
machines and so minimize
‘dead time’. Installing
Raychem splice sealing
products immediately after
welding gives reduced
installation time and earliest
possible mechanical pro-
tection for the welded joint.
The operator positions the
splice sealing product cen-
trally over the splice joint
and then locates the
assembly into the gripper
mechanism.
The wire assembly is
automatically ejected, with
the splice sealing product
installed and the joint area
sealed, insulated and strain
relieved. In-line or stub-type
splices can be installed.
Applications
The RBK-ILS-Processor
MkII is a semi-automatic
unit designed specifically
to install splice sealing
products onto ultrasonically
welded or crimped splice
joints used in automotive
harnesses.
The tool can operate in
several modes:
Stand-alone — operator
sets time and temperature.
Sequenced — preset
times and temperatures
can be sequenced auto-
matically (and can also
be randomly selected
from sequence stored.)
Available in: Americas Europe Asia Pacific
■■
2-14
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
RBK-ILS-Processor MkII (Continued)
Description Part No.
Equipment RBK-Proc-Mk2-Processor 740331-000
RBK-Proc-Mk2-Proc-Aircool A96930-000
Accessories Stub splice fixture - RBK-ILS-Proc-Stub-Sp-Fix 981721-000
Air cooled stub splice fixture - RBK-ILS-Proc-Air-Cool-Kit 843800-000
8 mm ring terminal fixture - RBK-ILS-Proc-Termfix-08mm 049857-000
Ordering Information
Technical Specifications Electrical Supply 220V-240V-50Hz
Power Consumption 1.7 Amps (Max)
Operating Temperature 550°C [1022°F] (Max)
(500°C [932°F] recommended)
Machine Cycle Times for splice sealing products 6 to 20 seconds depending on wire size
used on typical range of automotive splices and the number or wires used
T
otal System Noise <80dB
Dimensions 390 x 365 x 225 mm [15 x 14 x 9 in]
Weight 18 Kg [40 lb]
Product Range RBK-ILS-125 Products Sizes 1 to 3A
RBK-ILS-85 Products Sizes 6/1 to 12/3
For Other Raychem Products (eg RBK-VWS, RBK-ESS….) Contact TE
2-15
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
Model 105
Tabletop Tunnel Oven
Product Facts
Closed-loop speed and
temperature control
Continuous controlled
process
Adaptable for different
applications
CE approved for worldwide use
Heater operation and over-
temperature alarm lights
the heat zone. The upper
chamber is equipped with
adjustable heat shields to
maximize the oven heating
efficiency for various appli-
cations.
Controlled Heating Zone
The Model 105 Tunnel Oven
has two stamped foil heat-
ing elements that are manu-
factured to a strict wattage
specification. Consistent
temperatures (ambient to
700ºC) are controlled by a
thermocouple embedded
into the upper heating ele-
ment connected to a
closed-loop temperature
controller. An alarm light
illuminates whenever the
actual heating element tem-
perature varies from the set
point temperature.
Conveyor Speed Control
The conveyor speed is pre-
cisely set by a 3-digit
potentiometer. The SCR
drive controller and DC
drive motor ensure constant
conveyor speed at any
potentiometer setting from
100 to 999 [0.2 to 5.0 feet
per minute], for precise
heating of assemblies.
Minimal Skill Requirements
The open loading area of
the entry section of the
M105 requires that the
operator simply place an
assembly on the mesh con-
veyor belt within the effec-
tive width of the heat zone
and collect it at the oppo-
site end.
Versatility
The processor is designed
to process a broad range of
heat-shrinkable products up
to 76.2 mm [3 in] in diame-
ter and infinite length. The
infrared energy source is
well-suited to efficient pro-
cessing of either single-wall
Applications
The Model 105 Tunnel Oven
is a reliable and versatile
process heater which pro-
vides a controlled process
for a wide variety of heat-
shrinkable products.
The M105 is designed as
an integrated modular unit.
Assemblies are placed on
the entry section of a mesh
conveyor belt, transported
through the heating chamber,
across a bank of cooling
fans then discharged from
the rear of the conveyor.
The M105 has two upper
heating chamber height
positions, 54 mm [2.11 in]
and 98 mm [3.86 in].The
position is adjusted by
removing the pivot pins and
relocating them in the bear-
ing stands.
The upper chamber is
cantilevered to permit pro-
cessing of assemblies that
require only a portion of the
assembly to pass through
Available in: Americas Europe Asia Pacific
■■
or adhesive-lined
tubing. Heat output and
drive speed can be con-
trolled to accommodate a
wide variety of products
and substrates.
Safety Features:
• Emergency Stop
• Automatic cool-down
circuit to extend the life of
the components
• Over-temperature switch
that shuts off all power in
the event of an overheat
condition
• Lockout on temperature
and speed controllers to
prevent unauthorized
changes
• Audible alarm indication
of a heater failure
• Circuit breaker for current
overload
2-16
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
Model 105 (Continued)
Electrical
Power requirements 210-240 VAC, 20A, 1, 50/60 Hz
Heating elements (2) 1500 watt infrared stamped foil with black quartz face, one top & bottom
Drive system DC gear motor with closed loop motor controller, 3-digit thumbwheel
Air flow (cooling) 4 – 100 CFM fans, 2 - for upper heater housing, 2 – for product cooling
Operating temperature Set Point (Heater Surface) - Ambient to 700°C, Throughput = 50° to 200°C
Mechanical
Conveyor belt system Wire mesh 70% open, with optional Teflon coating
Belt Speed 6.1 cm [0.2 ft] to 152 cm [5.0 ft] per minute
Dimensions cm [in]
Processor dimensions 99 cm [39 in] L x 68.5 cm [27 in] W x 41.7 cm [16.5 in] H
Processor weight 68 Kg [150 lb]
Control box dimensions 51.5 cm [20.25 in] L x 21.0 cm [8.25 in] W x 17.8 cm [7.0 in] H
Control box weight 7.7 Kg [17 lb]
Shipping dimensions 134.6 cm [53 in] L x 116.8 cm [46 in] W x 63.5 cm [25 in] H
Shipping weight 146 Kg [320 lbs]
Tubing sizes
T
ubing diameter (max) Up to 76.2 mm [3.0 in]
Tubing length (max) 356 mm [14 in] perpendicular to belt travel, unlimited length parallel to belt travel
Version Description Part No.
Model 105 Tunnel Oven CLTEQ-M105-TUNNEL-OVEN 955018-000
Specifications and
Dimensions
2-17
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
Model 16B
Tabletop Belt Heater
Product Facts
Closed-loop speed and
temperature control
Continuous controlled
process
Adaptable for different
applications
Bench top design
Heater operation and over-
temperature alarm lights
closed-loop temperature
controller. An alarm light
illuminates whenever the
actual heating element tem-
perature varies from the set
point temperature.
Speed Control
The belt speed is selected
using a 3-digit thumbwheel
via a closed-loop motor
controller and DC gear
motor.
Minimal skill requirements
There are clearly marked
guides for aligning the
assembly as well as the
tubing or device being
processed. The operator
only has to center the
assembly then the tubing
and slide it into the belts.
The belts grip and carry the
assembly through the heat-
ing and cooling zone,
depositing them into the
unloading bin.
Labor costs are reduced
significantly because once
an operator loads an
assembly, that operator can
begin preparing another
assembly. The throughput
rate is usually limited by the
rate at which the operator
can load assemblies into
the processor.
Versatility
The processor is designed
to process a broad range of
heat-shrinkable products up
to 19 mm [0.75 in] in diam-
eter and 90 mm [3.5 in] in
length. The infrared energy
source is well-suited to effi-
cient processing of either
single-wall or adhesive-
lined tubing. Heat output
can be controlled to
accommodate a wide vari-
ety of products and sub-
strates.
Applications
The Model 16B is our small-
est (tabletop) conveyor type
processor which provides a
controlled process for a
wide variety of heat-shrink-
able tubing products.
Double-sided timing belts
on the top and bottom of
the processing chamber
draw the assemblies through
a thermally controlled
infrared heat zone and then
through a fan-cooled cool-
ing zone before depositing
them into the unloading bin.
Controlled Heating Zone
The Model 16B processor
has two stamped foil heat-
ing elements that are manu-
factured to a strict wattage
specification. Consistent
temperatures (ambient to
650º C) are controlled by a
thermocouple embedded
into the upper heating
element connected to a
Available in: Americas Europe Asia Pacific
■■
Safety Features:
• Circuit breaker for current
surges
• Pinch points protected by
the housing
• Belts that do not pinch
with significant force
An over-temperature
switch that kills power in
the event of an overheat
condition
• Automatic cool-down
circuit to prevent heat
damage to components
2-18
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
Model 16B (Continued)
Electrical Part No. 827429-000 Part No. 584313-000, 047143-000
Power Requirements 120 VAC, 1, 220 VAC, 1 ,
50/60 Hz, 20 A 208-240 VAC, 15 A.
Heating elements 2 ea. 1000 watt stamped foil infrared with quartz face
Drive system DC gear motor with closed loop motor controller, 3-digit thumbwheel
Air flow (cooling) 2 – 100 CFM fans in the upper heater housing
Mechanical
Conveyor belt system Double sided timing belts; two on each side of the processor –
pitch 9.5 mm [0.375 in]
Belt Speed Up to 288 cm / min [7.5 ft / min]
Dimensions cm [in]
Processor dimensions 48 cm [19 in] W x 109 cm [43 in] L x 33 cm [13 in] H
Processor weight 41 Kg [90 lbs]
Shipping dimensions 61 cm [24 in] W x 112 cm [43 in] L x 56 cm [22 in] H
Shipping weight 68 Kg [150 lbs]
Tubing sizes
T
ubing diameter (max) Up to 19 mm [0.75 in]
Tubing length (max) Up to 90 mm [3.5 in]
Version Description Part No.
Model 16B - 120 volt CLTEQ-M16B-120V-3WIR 827429-000
Model 16B - 220 volt (4-wire) CLTEQ-M16B-220V-4-WR 584313-000
Model 16B - 220 volt Mod. CLTEQ-M16B-220V-3W-M 047143-000
(3 wire with Transformer)
Specifications and
Dimensions
2-19
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
Model 19
Belt Heater for Heat-
Shrinkable Tubing Products
Product Facts
Closed-loop speed and
temperature control
Continuous controlled
process
Adaptable for different
applications
CE approved for worldwide use
Self-diagnostic circuitry
Parts counter and hour meter
Control Heating Zone
The Model 19 processor
has two stamped foil heating
elements that are manufac-
tured to a strict wattage
specification.
Consistent temperatures
(ambient to 700ºC) are con-
trolled by a thermocouple
embedded into the upper
heating element connected
to a closed loop tempera-
ture controller. An alarm
light illuminates whenever
the actual heating element
temperature varies from the
set point temperature.
Speed Control
The belt speed is selected
using a 3-digit thumbwheel
(on the front panel) via a
closed loop motor controller
and DC gear motor.
Minimal Skill Requirements
There are clearly marked
guides for aligning the
assemblies as well as the
tubing or device being
processed. The operator
only has to center the
assembly, then the tubing
and slide it into the belts.
The belts grip and carry the
assemblies through the
heating and cooling zones,
depositing them into the
unloading bin.
Versatility
The processor is designed
to process a broad range of
Raychem heat-shrinkable
products up to 25 mm [1 in]
in diameter and 178 mm
[7 in] in length. The infrared
energy source is well-suited
to efficient processing of
either single wall or adhe-
sive-lined
Applications
The Model 19 conveyor
type processor is a reliable
and versatile process
heater which provides a
controlled process for a
wide variety of heat-shrink-
able products.
Double-sided timing belts
on either side of the upper
and lower heating cham-
bers draw the assemblies
through a thermally con-
trolled infrared heat zone,
then through a fan-cooled
zone before depositing
them into the unloading bin.
The processor was designed
to meet the requirements
of the European Safety
Directives and is CE
approved, allowing for
worldwide use.
Available in: Americas Europe Asia Pacific
■■
tubing. Temperature and
speed can be controlled
to accommodate a wide
variety of products and
substrates.
Safety Features:
• Emergency Stop
• Automatic cool-down
circuit to extend the life
of the components
• Over-temperature switch
that shuts off all power in
the event of an overheat
condition
• Lockout on temperature
and speed controllers to
prevent unauthorized
changes
2-20
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
Model 19 (Continued)
Electrical
Power requirements 210-240 VAC, 20A, 1, 50/60 Hz
Heating elements 2 X Standard = 1580W, Wide = 1660W, Narrow = 880W
Drive system DC gear motor with closed loop motor controller; 3-digit thumbwheel
Air flow (cooling) 2 – 100 CFM fans in the upper heater housing
Operating temperature Set Point (Heater Surface) - Ambient to 700°C, Through-put = 50° to 200°C
Mechanical
Conveyor belt system Double sided timing belts; two on each side of the processor –
pitch 9.5 mm [0.375 in]
Belt Speed Up to 152 cm / min [5.0 ft / min]
Dimensions cm [in]
Processor dimensions 53 cm [21 in] W x 135 cm [53 in] L x 45 cm [18 in] H
Shipping dimensions 66 cm [26 in] W x 147 cm [58 in] L x 58 cm [23 in] H
Processor weight 56 Kg [120 lbs]
Shipping weight 86 Kg [190 lbs]
Tubing sizes
Tubing diameter (max) Up to 2.5 cm [1.0 in]
Tubing length (max) Up to 12.7 cm [4.0 in] Standard or 178 mm [7.0 in] with Model 19 - Wide
Version Description Part No.
Model 19 - Standard (3.75 in. Elements) CLTEQ-M19-BELT-HTR 714529-000
Model 19 - Wide (6 in. Elements) CLTEQ-M19-BELT-HTR-6IN 075135-000
Model 19 - Narrow (1.5 in. Elements) CLTEQ-M19-BELTHTR-SS D43037-000
Optional Attachments
Floor Stand with wheels IR-1900-FLOOR-STAND 889664-000
Specifications and
Dimensions
2-21
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
Model 20
Belt Heater for Heat-
Shrinkable Tubing Products
Product Facts
Closed-loop speed and
temperature control
Continuous controlled
process
Adaptable for different
applications
CE approved for worldwide use
Heater operation and over-
temperature alarm lights
into the upper heating
element connected to a
closed loop temperature
controller. An alarm light
illuminates whenever the
actual heating element
temperature varies from
the set point temperature.
Speed Control
The belt speed is selected
using a 3-digit thumbwheel
(on the front panel) via a
closed-loop motor controller
and DC gear motor.
Minimal Skill Requirements
There are clearly marked
guides for aligning the
assemblies as well as the
tubing or device being
processed. The operator
only has to center the sub-
strate, then align the tubing
and slide the assembly into
the belts. The belts grip
and carry the assemblies
through the heating and
cooling zones, depositing
them into the unloading bin.
Versatility
The processor is designed
to process a broad range of
Raychem heat-shrinkable
products up to 25 mm [1 in]
in diameter and 127 mm [4 in]
in length. The infrared
energy source is well-suited
to efficient processing of
either single wall or adhe-
sive-lined tubing. Temperature
and speed can be con-
trolled to accommodate a
wide variety of products
and substrates.
Safety Features:
• Emergency Stop
• Automatic cool-down cir-
cuit to extend the life of
the components
Applications
The Model 20 conveyor
type processor is a reliable
and versatile process
heater, which provides a
controlled process for a
wide variety of heat-shrink-
able products.
Double-sided timing belts
on either side of the upper
and lower heating cham-
bers draw the assemblies
through a thermally con-
trolled infrared heat zone,
then through a fan-cooled
zone before depositing
them into the unloading bin.
Controlled Heating Zone
The Model 20 processor
has two stamped foil heat-
ing elements that are manu-
factured to a strict wattage
specification. Consistent
temperatures (ambient to
700ºC) are controlled by a
thermocouple embedded
• Over-temperature switch
that shuts off all power in
the event of an overheat
condition
• Lockout on temperature
and speed controllers to
prevent unauthorized
changes
New Features
• Self-locking support post
in the upper heating
chamber for servicing,
maintenance and emer-
gency cool down
• Reversing motor relay
which runs the timing
belts in reverse until the
Set Point temperature has
been reached, preventing
the operator from loading
assemblies into the
machine
• Hinged lower side panels
for access to compo-
nents, making routine
service and maintenance
much easier
Available in: Americas Europe Asia Pacific
■■
2-22
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
Model 20 (Continued)
Electrical
Power requirements 210-240 VAC, 20A, 1, 50/60 Hz
Heating elements 2 X Standard = 1580W, Wide = 1660W, Narrow = 880W
Drive system DC gear motor with closed loop motor controller; 3-digit thumbwheel
Air flow (cooling) 2 – 100 CFM fans in the upper heater housing
Operating temperature Set Point (Heater Surface) - Ambient to 700°C, Through-put = 50° to 200°C
Mechanical
Conveyor belt system Double sided timing belts; two on each side of the processor –
pitch 9.5 mm [0.375 in]
Belt Speed Up to 152 cm / min [5.0 ft / min]
Dimensions cm [in]
Processor dimensions 53 cm [21 in] W x 135 cm [53 in] L x 45 cm [18 in] H
Shipping dimensions 66 cm [26 in] W x 147 cm [58 in] L x 58 cm [23 in] H
Processor weight 56 Kg [120 lbs]
Shipping weight 86 Kg [190 lbs]
Tubing sizes
Tubing diameter (max.) Up to 25 mm [1.0 in]
Tubing length (max.) Up to 104 mm [4.0 in] stand
Version Description Part No.
Model 20 - Standard (3.75 in. Elements) MODEL20CE-BELT-HEATER CB8546-000
Optional Attachments
Floor Stand with wheels IR-1900-FLOOR-STAND 889664-000
Specifications and
Dimensions
2-23
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
2
Application Equipment
VBH-1
Versatile Bed Heater for
Large Assemblies and
Substrates
Product Facts
The Versatile Bed Heater
(VBH-1) is the latest
generation of reliable and
versatile process heaters.
Closed-loop speed and
temperature control
Controlled process
Adaptable for a large variety
long length and heat
sensitive applications
Heater operation and over-
temperature alarm lights
Heater and track are sold
seperately. See available
track lengths on page 2-24.
Speed Control
The belt speed is selected
using a 3-digit thumbwheel
(on the front panel) via a
closed-loop motor controller
and DC gear motor.
Controlled Heating Zone
The VBH-1 processor has
two stamped foil heating
elements that are manufac-
tured to a strict size and
wattage specification.
Consistent temperatures
(ambient to 650ºC) are con-
trolled by a thermocouple
embedded into the upper
heating element connected
to a closed loop tempera-
ture controller. An alarm
light illuminates whenever
the actual heating element
temperature varies from the
set point temperature.
Minimal Skill Requirements
The open loading area of
the holding fixtures on the
VBH-1 requires that the
operator simply place the
assembly on the holding
fixtures within the effective
width of the heat zone. The
assemblies can be removed
once the heater transporter
has passed over the assem-
blies and has come to a
complete stop in either the
right or left parking stations.
Versatility
The traveling heater is
designed to process a
broad range of heat-shrink-
able products up to 127
mm [5 in] in diameter and
infinite length.
The infrared energy source
is well-suited for efficient
processing of either single-
wall or adhesive-lined tubing.
Heat output and drive speed
can be controlled to accom-
modate a wide variety of
products and substrates.
Applications
The VBH-1 is an integrated
modular unit consisting of
an upper and lower heater
chamber with a transporter
base and motorized wheels
that are directed through an
aluminum track. The heater
transporter automatically
stops when it reaches the
parking station at either end
of the process area.
It has been designed to
accommodate a large vari-
ety of difficult to process
applications. With an
adjustable upper heating
chamber the heater separa-
tion can be adjusted from
37 mm [1.5 in] to a 150 mm
[6 in] gap enabling the unit
to process heat-shrinkable
tubing products up to 127
mm [5 in} in diameter. The
upper and lower chambers
are provided with adjustable
heat shields to maximize
the oven heating efficiency.
Available in: Americas Europe Asia Pacific
■■
Safety Features
Emergency Stop
Automatic cool-down
circuit to extend the life
of the components
Over-temperature switch
that shuts off all power in
the event of an overheat
condition
Lockout on temperature
and speed controllers to
prevent unauthorized
changes
Safety guards to protect
operator from moving
parts and hot surfaces
2-24
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
VBH-1 (Continued)
Electrical
Power Requirements 208/240 VAC, 1, 50/60 Hz, 20 A
Heating elements 2 X From 600 to1600 watt infrared stamped foil with quartz face
Drive system 1/12 hp DC motor with SCR Drive controller with a 3 digit speed potentiometer
Air flow (Cooling) 2 X 100 CFM fans in the upper heater housing / control box and 1 in lower chamber
Operating temperature Set Point (Heater Surface) - Ambient to 650°C, Through-put = 50° to 250°C
Mechanical
Moving oven speed 12.7 cm [0.50 ft] to 254 cm [10.0 ft] / Minute
Heater separation Adjustable from 37 mm [1.5 in] to 150 mm [6 In] Upper Position
Effective heating length 355 mm [14 in]
Effective heating width 254 mm [10 in]
Dimensions cm [in]
Control box dimensions 407 mm [16 in] L x 305 mm [15 in] W x 125 mm [5 in] H
Heating Chamber dimensions 457 mm [18 in] L x 407 mm [16 in] W x 533 mm [21 in] H – Full extension
Heating System weight 30 Kg [66 lb]
Tubing sizes
Tubing diameter Up to 127 mm [5 in]
T
ubing length 255 mm [10 in] perpendicular to heater travel, unlimited length parallel to heater
Heating unit Description Part No.
VBH-1 Bed Heater VBH-1-BED-HTR-220V-3WR CJ1047-000
Track Description Part No.
10 ft. Aluminum Track VBH-1-BED-HTR-TRACK-10FT CJ1494-000
15 ft. Aluminum Track VBH-1-BED-HTR-TRACK-15FT CM6819-000
Specifications and
Dimensions
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TE Connectivity:
CLTEQ-M16B-120V-3WIR