https://www.phoenixcontact.com/us/products/1436673
28.10.2013Page1/5
Flush-type connector-SACC-CI-M12MSD-4CON-L90 SH SCO-1436673
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://download.phoenixcontact.com)
Sensor/actuator flush-type connector, plug, 4-pos., D-coded, shielded, with angled solder connection, only
contact insert
Key commercial data
Packing unit 1 1
Minimum order quantity 20 1
Weight per Piece (excluding packing) 4.75 GRM
Custom tariff number 85366990
Country of origin Germany
Technical data
Ambient conditions
Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket)
Degree of protection IP67
General
Rated current at 40°C 4 A
Rated voltage 60 V
Number of positions 4
Contact resistance ≤ 3 mΩ
Insulation resistance ≥ 100 MΩ
Coding D - data
Standards/regulations M12 connector IEC 61076-2-101
Status display No
Surge voltage category II
Pollution degree 3
Connection method Solder pins
https://www.phoenixcontact.com/us/products/1436673
28.10.2013Page2/5
Flush-type connector-SACC-CI-M12MSD-4CON-L90 SH SCO-1436673
Technical data
General
Mounting type PCB mounting
Material
Inflammability class according to UL 94 V0
Contact material CuZn
Contact surface material Au
Contact carrier material PA 66
Sealing material FKM / EPDM
Classifications
eCl@ss
eCl@ss 4.0 27060306
eCl@ss 4.1 27060306
eCl@ss 5.0 27061801
eCl@ss 5.1 27260701
eCl@ss 6.0 27279220
eCl@ss 7.0 27440103
eCl@ss 8.0 27440103
ETIM
ETIM 3.0 EC002061
ETIM 4.0 EC002061
ETIM 5.0 EC002061
UNSPSC
UNSPSC 6.01 31251501
UNSPSC 7.0901 31251501
UNSPSC 11 31251501
UNSPSC 12.01 31251501
UNSPSC 13.2 31251501
Approvals
Approvals
Approvals
UL Recognized / GOST / GOST
https://www.phoenixcontact.com/us/products/1436673
28.10.2013Page3/5
Flush-type connector-SACC-CI-M12MSD-4CON-L90 SH SCO-1436673
Approvals
Ex Approvals
Approvals submitted
Approval details
UL Recognized
mm²/AWG/kcmil 26-20
Nominal current IN 4 A
Nominal voltage UN 250 V
GOST
GOST
Accessories
Accessories
Panel mounting base
Housing screw connection-SACC-M12-SCO PLUG-1551493
M12 SPEEDCON housing screw connection for M12 male inserts, with O-ring, for all SPEEDCON-capable THR and
wave soldering contact carriers
https://www.phoenixcontact.com/us/products/1436673
28.10.2013Page4/5
Flush-type connector-SACC-CI-M12MSD-4CON-L90 SH SCO-1436673
Accessories
Housing screw connection-SACC-M12-SCO PLUG L90-1436709
M12-SPEEDCON housing screw connection for M12 male inserts, with flat gasket, for all Speedcon-compatible THR and
wave soldering contact carriers
Housing screw connection-SACC-M12 PLUG PRESS-1437892
M12 pin, housing screw connection, press-in version, for all Speedcon-compatible THR and wave soldering contact
carriers
Drawings
Schematic diagram
3
4
21
Pin assignment M12 male connector, 4-pos., D-coded, male side
Drilling diagram
15
4xØ1,3
5,8
9,8
±0,05
3,54
9,8
12,34
Ø1±0,05
Ø2,05+0,05
Ø2,8+0,05
2
Drilling diagram only valid in connection with the SACC-
M12-SCO PLUG L90 housing (order no. 1436709)
https://www.phoenixcontact.com/us/products/1436673
28.10.2013Page5/5
Flush-type connector-SACC-CI-M12MSD-4CON-L90 SH SCO-1436673
Dimensioned drawing
29,6
Ø1
8,5
15,9
M12 flush-type connector, plug, contact carrier, side view
Dimensioned drawing
15,9
19,2
M12 flush-type connector, plug, contact carrier, front view
Dimensioned drawing
Ø7
Ø1
Optionally with O-ring (green) for tight seal when plugged in.
- the axial mating force of 80 N per connector may
not be exceeded when using with assembled O-ring!
- Avoid radial forces!
Dimensioned drawing
10
20
9,2
12,5
2
≤1,5
Locked area on the PCB
© Phoenix Contact 2013 - all rights reserved
http://www.phoenixcontact.com