GBL005 thru GBL10 Vishay Semiconductors formerly General Semiconductor Glass Passivated Single-Phase Bridge Rectifier Case Type GBL Features 0.825 (20.9) 0.815 (20.7) 0.125 (3.17) x 45 degrees Chamfer Reverse Voltage 50 and 1000 V Forward Current 4.0 A * This series is UL listed under the Recognized Component Index, file number E54214 * Glass passivated chip junction * High case dielectric strength * Typical IR less than 0.1A * High surge current capability * Ideal for printed circuit boards 0.421 (10.7) 0.411 (10.4) 0.080 (2.03) 0.060 (1.50) 0.098 (2.5) 0.075 (1.9) 0.095 (2.41) 0.080 (2.03) 0.098 (2.5) Mechanical Data 0.718 (18.2) 0.682 (17.3) Lead Depth 0.022 (0.56) 0.018 (0.46) 0.075 (1.9) 0.050 (1.27) 0.040 (1.02) 0.210 (5.3) 0.190 (4.8) 0.040 (1.02) 0.030 (0.76) 0.140 (3.56) 0.128 (3.25) 0.026 (0.66) 0.020 (0.51) Polarity shown on front side of case, positive lead beveled corner. Dimensions in inches and (millimeters) Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 260C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension Mounting Position: Any Weight: 0.071 oz., 2.0 g Epoxy meets UL 94V-0 Flammability Rating Packaging codes/options: 1/400 EA. per Bulk Tray Stack Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Symbol GBL 005 GBL 01 GBL 02 GBL 04 GBL 06 GBL 08 GBL 10 Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Parameter Maximum DC blocking voltage Maximum average forward rectified output current at TC=50C TA=40C Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) TJ=150C Rating for fusing (t<8.3ms) Typical thermal resistance per leg Operating junction storage and temperature range Electrical Characteristics IF(AV) 4.0(1) 3.0(2) A IFSM 150 A I2t 93 A2sec RJA RJL 22(2) 3.5(1) C/W TJ, TSTG -55 to +150 C Ratings at 25C ambient temperature unless otherwise specified. Maximum instantaneous forward drop per leg at 4.0 Amperes VF 1.00 V Maximum DC reverse current at rated TA= 25C DC blocking voltage per leg TA=125C IR 5.0 500 A Typical junction capacitance per leg at 4.0V, 1MHz CJ 95 40 pF Notes: (1) Unit mounted on 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3cm) Al. plate (2) Unit mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5" (12 x12mm) copper pads Document Number 88609 24-Aug-04 www.vishay.com 1 GBL005 thru GBL10 Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 2 -- Maximum Non-Repetitive Peak Forward Surge Current Per Leg 5.0 60 Hz Resistive or Inductive Load Heat-Sink Mounting 3.0 x 3.0 x 0.11" Thick (7.5 x 7.5 x 0.3cm) Aluminum Plate 4.0 3.0 2.0 P.C.B. Mounting 0.47 x 0.47" (12 x 12mm) Copper pads with 0.375" (9.5mm) lead length 1.0 Peak Forward Surge Current (A) Average Forward Output Current (A) Fig. 1 -- Derating Curves Output Rectified Current 0 150 TJ = TJ max. Single Sine-Wave (JEDEC Method) 100 50 1.0 Cycle 0 0 10 1 150 100 50 Fig. 4 -- Typical Reverse Leakage Characteristics Per Leg 100 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) Fig. 3 -- Typical Forward Voltage Characteristics Per Leg 10 1 0.1 TJ = 25C Pulse width = 300s 1% Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 500 100 0.1 TA = 25C 0.01 0 1.6 100 50 -- 400V 600 -- 1000V Reverse Voltage (V) www.vishay.com 2 80 60 100 Fig. 6 -- Typical Transient Thermal Impedance Per Leg Transient Thermal Impedance (C/W) Junction Capacitance (pF) TJ = 25C f = 1.0MHz Vsig = 50mVp-p 10 40 20 Percent of Rated Peak Reverse Voltage (V) 1,000 1 50 -- 400V 600 -- 1000V 1 Fig. 5 -- Typical Junction Capacitance Per Leg 0.1 TA = 125C 10 Instantaneous Forward Voltage (V) 10 100 Number of Cycles at 60Hz Ambient Temperature (C) 100 100 10 1 0.1 0.01 0.1 1 10 100 t, Heating Time (sec.) Document Number 88609 24-Aug-04