SDK CONNECTOR Reverse Type Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 5V AC, DC * Temperature range: 25C to +85C (including temperature rise in applying electrical current) * Recommended PC board thickness: 0.6 to 1.0mm When it is mounted on the FPC, recommendable reinforcing layer thickness is 0.6mm min. * Contact resistance: (Signal part) Initial value/30m max. After environmental testing/60m max. (Switch part) Initial value/100m max. After environmental testing/100m max. * Insulation resistance: 1,000M min. at 500V DC * Withstanding voltage: 500V AC/minute * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. This connector is designed for SD Card & MMC (Multi media card), complying with the SD Card Association standard, and is with the switch for Write-protection & Carddetection. And due to Push-push mechanism design, its card can be easily ejected by push-push operation. * Space saving design, 27.1mm(W)x 30.1mm(D)x 2.8mm(H) * The enough amount of card ejection (8.4mm) * 10,000 mating cycles is guaranteed. * Prevention of reverse card insertion PC board layout (viewed from component side) and Assembly layout 0.05 13.225 0.05 9.925 0.05 9.075 0.05 7.075 0.05 8.325 0.05 6.725 5.4750.05 5.50.05 3.8750.05 3.1250.05 0.05 1.875 0.05 0.05 0.625 1.2 0.05 11-1.1 0.05 0.05 0.05 0.05 26.1 13.425 2.5 1 GND 0.05 1.6 9.7MAX 0.05 1.6 9.7MAX 0.05 Pattern prohibition area 0.05 14.475 13.225 1.3 3.7 22.3 25.3 2.5 GND 0.1 Write protect switch 1 [GND] Connector outline 1 0.05 0.05 0.05 14.675 4.5 0.05 0.8 0.05 1 0.9 0.05 23.1 1.2 0.05 0.05 0.05 0.9 2.1 Circuit No.7 Circuit No.8 Circuit No.5 Circuit No.6 Circuit No.4 Circuit No.3 Circuit No.2 Circuit No.1 GND GND 1.2 8.8 [GND] 0.05 18.2MAX 26.1 0.05 Card detection switch 1 Card detection switch 2 1.2 0.1 30.5MIN 0.05 1.45 0.05 Circuit No.9 Write protect switch 2 SDK CONNECTOR Reverse Type Connector 9.925 9.075 Circuit No.7 Circuit No.8 Card detection switch 2 Housing, Guide: Heat resisting resin, UL94V-0 Contact: Copper alloy, nickel-undercoated, selective gold-plated Card detection switch: Copper alloy, nickel-undercoated, gold-plated Write protect switch: Copper alloy, nickel-undercoated, selective gold-plated, selective tin-plated (reflow treatment) Card lock, Joint rod, Spring: Stainless Shell: Stainless, nickel-undercoated, selective tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Card center (8.4) 2.8 43.7 when releasing a card 35.3 when putting in a card 29.7 34.3 when pushing in a card 25.3 8 Circuit No.5 Circuit No.6 0.625 Circuit No.4 3.125 1.875 Circuit No.2 Circuit No.3 3.875 Circuit No.1 450 Material and Finish 6.725 5.125 0.4 5.475 Circuit No.9 Q'ty / reel 8.325 7.075 Card detection switch 1 Model No. SDKR-9BRS-K13-G-TB 14.175 27.1 2