TECHNICAL DATA SHEET 1/3 R222.450.721 TWO HOLE FLANGE SHROUD 0.4MM Series : SMP SMOOTH BORE All dimensions are in mm. . po . ao COMPONENTS BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS - PLATING (m) MATERIALS STAINLESS STEEL PASSIVATED . - - Issue : 0529 B In the effort to improve our products, we reserve the right to make changes judged to be necessary. TECHNICAL DATA SHEET 2/3 R222.450.721 TWO HOLE FLANGE SHROUD 0.4MM Series : SMP SMOOTH BORE PACKAGING Standard 100 Unit `W' option SPECIFICATION Other Contact us ELECTRICAL CHARACTERISTICS Impedance Frequency VSWR NA + Insertion loss RF leakage -( Voltage rating Dielectric withstanding voltage Insulation resistance NA NA 0.000 NA NA NA NA NA GHz x F(GHz) Maxi F(GHz) dB Maxi - F(GHz)) dB Maxi Veff Maxi Veff mini M mini ENVIRONMENTAL Operating temperature Hermetic seal Panel leakage OTHER CHARACTERISTICS Assembly instruction Others : MECHANICAL CHARACTERISTICS Center contact retention Axial force - Mating end Axial force - Opposite end Torque NA N mini AN N mini NA N.cm mini Recommended torque Mating Panel nut NA N.cm NA N.cm Mating life Weight -65/165 C NA Atm.cm3/s NA 1000 Cycles mini 0.332 g Issue : 0529 B In the effort to improve our products, we reserve the right to make changes judged to be necessary. TECHNICAL DATA SHEET TWO HOLE FLANGE SHROUD 0.4MM 3/3 R222.450.721 Series : SMP SMOOTH BORE ADDITIONAL INFORMATIONS MOUNTING INSTRUCTIONS Check the quality of the soldering, as well as the position of the glass seal in the package. Place the receptacle and pre-assemble screw on the package. Mount the alignment tool R2821.860.024 into the flange to ensure a good concentricity. Screw the receptacle on the package. Remove the aligning positioner. Issue : 0529 B In the effort to improve our products, we reserve the right to make changes judged to be necessary.