TECHNICAL DATA SHEET
1 / 3
TWO HOLE FLANGE SHROUD 0.4MM R222.450.721
SMOOTH BORE
Series : SMP
Issue : 0529 B
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
All dimensions are in m m.
..
po ao
COMPONENTS
BODY
CENTER CONTACT
OUTER CONTACT
INSULATOR
GASKET
OTHERS PARTS
-
-
MATERIALS
STAINLESS STEEL
-
-
PLATING (
µm
)
PASSIVATED .
-
-
TECHNICAL DATA SHEET
2 / 3
TWO HOLE FLANGE SHROUD 0.4MM R222.450.721
SMOOTH BORE
Series : SMP
Issue : 0529 B
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
PACKAGING SPECIFICATION
Standard Unit
O
ther
100 ‘W’ option Contact us
ELECTRICAL CHARACTERISTICS ENVIRONMENTAL
Impedance NA Ω
O
perating temperature -65/165 ° C
Frequency NA GHz
H
ermetic seal NA Atm.cm3/s
VSWR NA +0.000 x F(
G
Hz) Maxi
P
anel leak ag e NA
Insertion los s NA
√F(
G
Hz) dB Maxi
RF leakage - ( NA
- F(GHz)) dB Maxi
Voltage rating NA Veff Max i
Dielectric withstanding voltage NA Veff mini
Insulation resistan ce NA MΩ mini
OTHER CHARACTERISTICS
Assembly instruction
O
thers
:
MECHANICAL CHARACTERISTICS
Center contact retention
Axial force – Mating end NA N mini
Axial force – Opposite end AN N mini
Torque NA N.cm mini
Recommended torque
Mating NA N.cm
Panel nut NA N.cm
Mating life 1000 Cycles mini
Weight 0.332 g
TECHNICAL DATA SHEET
3 / 3
TWO HOLE FLANGE SHROUD 0.4MM R222.450.721
SMOOTH BORE
Series : SMP
Issue : 0529 B
In the effort to improve our products, we reserve the right to make changes judged to be
necessary.
ADDITIONAL INFORMATIONS
MOUNTING INSTRUCTIONS
Check the quality of the soldering, as well as
the position of the glass seal in the package. Place the receptacle and pre-assemble screw
on the package.
Mount the alignment tool R2821.860.024 into
the flange to ensure a good concentricity.
Screw the receptacle on the package.
Remove the aligning positioner.
