Installation Instructions and Notes
1. Place the insulator over the chassis as shown.
2. Place LPT80 or NLP65 power supply over the insulator as shown.
3. Align the 4x power supply to the chassis standoff.
4. Secure 4 pan head screws with washer provided with in kit as shown.
5. Place the cover over LPT80 or NLP65 power supply as shown.
6. Align the 4x cover to the U-bracket countersink holes.
7. Secure 4 countersink screws provided with in kit as shown.
8. Overall dimensions: 5.906 (150) x 3.858 (98) x 1.798 (44.4).
9. 9.Base plate has three sets of customer mountings:
a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm)
b. Side mounting (2X) 4mm clear holes plus 2 keyways. (See keyway detail)
c. Side mounting (4X) M3 inserts. Max. screw penetration 0.236 (6mm)
10.Ensure insulator is correctly fitted in base under PCB to maintain safety creepage
and clearances.
11.Ensure base is firmly connected to supply earth via the earth stud marked
12.When using this enclosure, ensure that relevant safety standards (e.g. EN60950) are com-
plied with, in respect to creepage and clearance distances, and distances through insulation.
13.All dimensions are in inches (mm)
Ø0.35 [Ø8.8] Ø0.14 [Ø3.6]
0.25 [6.4]
GROUND STUD
INPUT TERMINALS
OUTPUT TERMINALS
INSULATOR
(4X) STANDOFF
Rev. 08.31.07
LPX80 Enclosure
1 of 2
Embedded Power for
Business-Critical Continuity
LPX80
Enclosure
Installation Notes
LPX80 • Cover Enclosure Kit
LPX80 will fit the LPT8X and NLP65
power supplies.
Materials
1 Base
1 Cover
4 M 3X6mm pan head screws
with spring washer
4 M 3X6mm countersunk screws
1 M4 nut
1 M4 star washer
1 M4 spring washer
1 Plastic insulator sheet
Americas
5810 Van Allen Way
Carlsbad, CA 92008
USA
Telephone: +1 760 930 4600
Facsimile: +1 760 930 0698
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
16th - 17th Floors, Lu Plaza
2 Wing Yip Street, Kwun Tong
Kowloon, Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
For global contact, visit:
www.astecpower.com
www.artesyn.com
technicalsupport@astec.com
technicalsupport@artesyn.com
While every precaution has been taken to ensure
accuracy and completeness in this literature, Emerson
Network Power assumes no responsibility, and disclaims
all liability for damages resulting from use of this
information or for any errors or omissions.
Rev. 08.31.07
LPX80 Enclosure
2 of 2
Embedded Power for
Business-Critical Continuity
A
A
A
A
INPUT
WIRING
ACCESS
OUTPUT
WIRING ACCESS
(2X) M3 INSERTS
M3 INSERTS
(4X) MARKED "A"
(2X) Ø4mm MTG HOLES
SEE KEYWAY DETAILS
(4X) M3 STANDOFF
FOR MTG POWER SUPPLY
(2X) M3 INSERTS
1.181 30.0[]
1.134 28.8[]
0.984 25.0[]
2.236 56.8[]
3.858 98.0[]
5.906 150.0[]
(2X) 4.331 110.0[]
(2X) 0.364 9.3[]
(2X) 0.787 20.0[]
(2X) 3.543 90.0[]
(2X) 4.803 122.0[]
(2X) 0.787 20.0[]
(2X) 0.591 15.0[]
1.748 44.4[]
(2X) 0.738 18.8[]
(2X) 2.756 70.0[]
(2X) 2.55 65[]
(2X) 0.551 14.0[]
(2X) 0.657 16.7[]
(2X) 0.354 9.0[]
(2X) 3.150 80.0[]
Emerson Network Power and the Emerson
Network Power logo are trademarks and
service marks of Emerson Electric Co.
©2007 Emerson Electric Co.
Emerson Network Power.
The global leader in enabling
business-critical continuity.
EmersonNetworkPower. com
AC Power
Connectivity
DC Power
Embedded Power
Inbound Power
Integrated Cabinet Solutions
Outside Plant
Precision Cooling
Site Monitoring and Services
