i l 2 l 3 l 4 l 5 I] 6 l 7 l 8 l 9 ECN.NO. MODIFY.CONTENT DATE 10080261 Revd release 03/05 10 Modify Dimension Tolerance 12/26 3 A B 19120139 c #9080002 ADD Card detection switch 08/20/19 [QJo.10[B] : 2.4020.15 aS 1.55 (5.975) 0.5040.05 | CD Switch CD Switch | [- = =F 2 3 o- CG ,__| => a} to ampt Sol m i O 3 a 3 o| i Ss] os g| | : sl 5 ~ 3 = [ 3 = : | No.8 | Ng an 1H No.1 2-0.85 | TD _|L. e-0.s02006 fd 11400841XX_ 7.70 8 v0.10 L 64 Plating Au fu on contact area, Tin 120u Min on solder tail. S o a 3 11.10-0.05 2 |__. 65 Plating Au 3u on contact area, Tin 120u Min on solder tail. s je @ of 11.95 i 66 Plating Au 5u on contact area, Tin 120u Min on solder tail. |] - 67 Plating Au 10u on contact area, Tin 120u Min on solder tail. = t 68 Plating Au 15u on contact area, Tin 120u Min on solder tail. Card Center 0.025 ____ 9 Plating Au 30u on contact area, Tin 120u Min on solder tail. GENERAL TOLERANCE FILE.NO. C11400841 PART.NO. 11400841XX DRAWN Rosey MATERIAL SCALE N/A X.40.50 +5" REV. C : 080 x = * WILE Wire 39 te Fas CHECKED Weison. lu DATE 08 /20 /2019 UNIT mm X40. xt SIZE yx025| wxeT AA @-+ SHEET 1/A APPROVED Tom Amphenol Shouhmin Industry 1 I Z I 3 I 4 I 5 6 I Z I 8 I g8 l 9 REV. ECN.NO. MODIFY.CONTENT DATE Rafer to Sheet t of 11.95 { WS) -_- te J Amphenol | PIN Assignments ] | PIN NO.| Micro SD | 1 |Date Line[ Bit 2] Card Detect / | 2 |pate Line[Bit 3] oe] > | 3 |Command/Response s| S| = LU 4 |Supply voltage 2 | 5 [Clock - | 6 |Supply voltage ground | 7 _|Date Line[ Bit 0] . 8 Date Line[ Bit 1] 7 Micro SD Card OOOOOOIOOS SRR RG os 4 g : : RR vooowopoeorvorrong < _ Card detection switch: tol 2 IRR ooo g| S| = NM | oo 21 L1|_ | 0.80 0.80 _| || = (4.5) (5.5) | Switcho I | /-Connector Center | O Detect (it) Not | (Card Ejected) 7, Uh Note: Swite 2 . S 1. Material: So "| IL. Housing: LCP Black UL 94V-0 (Card Fully pushed in) Sls Contact: Copper alloy * Shell: Stainless steel 2. Plating: 10.90 Contact Area: Plating Au RECOMMENDED P.C.B LAYOUT Solder tail: Plating Tin P.C.B TOLERANCE: 0.05 Shell: Plating weldable Ni [=] Connector Area 3. Tail Coplanarity 0.142mm Maz. 4. Material should be fufilled Amphenol SPEC.4SSNO02 and SSNOO4. ZA PAD Area BSSes8] Pattern Prohibited Area GENERAL TOLERANCE | FILE.NO. c11400841 PART.NO. 1400841XX DRAWN Rosey MATERIAL SCALE N/A X.40.50 x. 5 REV. C TLE sew 0 in ah CHECKED Weison lu DATE 08 /20 /2019 UNIT mm. .X+0.38 xt 2 SIZE ; yxLO 25 Nx AA @-+ SHEET 1/A APPROVED Tom Amphenol Shouhmin Industry 1 I 2 I I 4 I 5 I 7 8 I 9