TRANSISTOR OPTOCOUPLERS SFH615A-1/2/3/4 SM ISOCOM 4 3 1 2 (R) LTD DESCRIPTION These devices are single, optocouplers. Each channel is composed of a Gallium Arsenide infra-red emitting diode and a silicon phototransistor. Package styles for these devices include 4 pin with surface mount, butt cut and gull wing options available. The same electrical die, assembly processes and materials are used for each channel of each device shown below. Therefore absolute maximum ratings, recommended operating conditions, electrical specifications and performance characteristics are identical for all units. Any exceptions, due to packaging variations and limitations, are as noted. Isocom Ltd supplies a multitude of plastic optocouplers for all applications varying from standard transistor optos through to Darlington's and Schmitt Trigger devices. It's massive family of optos vary in speed allowing maximum opportunity to engineers worldwide. All devices are performance guaranteed between temperatures and have completed rigorous testing. The Company's customers can be assured of our commitment to stringent quality, reliability and inspection standards, as demonstrated by our existing approvals. Other customer specific options can also be offered. FEATURES Performance guaranteed over -45C to +100C temperature range Manufactured and tested in BS9000 and CECC20000 approved premises High current transfer ratio 7500V electrical isolation Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use. Isocom Ltd cannot accept liability for any errors or omissions. For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email Isocom@isocomoptocouplers.com Or go to the Isocom Website @: Http://www.isocom.uk.com ABSOLUTE MAXIMUM RATINGS Storage Temperature Operating Temperature Lead Soldering Temperature Input-to-Output Isolation Voltage -65C to +100C -45C to +100C 260C 1.6mm from case for 10S x7500VDC Input Diode Forward DC Current Reverse DC Voltage Peak forward Current Power Dissipation 50mA 7V 1.5mA 100mW 10S duration Derate linearly above 100C at 1.6W/C. Output Transistor Collector-Emitter Voltage Emitter-Collector Voltage Collector-Base Voltage Collector Current Collector Current Power Dissipation 50V 7V 70V 50mA 100mA 100mW BVCEO BVECO BVCBO For t = 1mS For . Derate linearly above 100C at 1.4W/C PACKAGES 7.62 6.50 4.60 3.50 0.26 10.00 0.4 1.00 1.20 2.54 0.26 GULL WING and Dil version are available for all the above. Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use. Isocom Ltd cannot accept liability for any errors or omissions. For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email Isocom@isocomoptocouplers.com Or go to the Isocom Website @: Http://www.isocom.uk.com ELECTRICAL CHARACTERISTICS TA = 25C U.O.S. (each channel where appropriate). Input Diode Electrical Characteristics Parameter Symbol Test Conditions Forward Voltage VF IF = 10mA IF = 10mA, TA = 125C IF = 10mA, TA = -55C Reverse Breakdown VR IR = 0.1mA Voltage Reverse Current IR VR = 3V Capacitance CIN V = 0, f = 1MHz Output Detector Electrical Characteristics Collector-Emitter IC = 1mA BVCEO Breakdown Voltage (See note 1 below) Collector-Base Breakdown IB = 0.1mA BVCBO Voltage (See note 1 below) Emitter-Collector BVECO IE = 0.1mA Breakdown Voltage Emitter-Base Breakdown BVEBO IB = 0.1mA Voltage Collector-Emitter Leakage ICEO VCE = 20V, IF = 0 Current VCE = 20V, IF = 0, TA = 125C Coupled Electrical Characteristics DC Current Transfer Ratio IC/IF (See note 3) IF = 10mA, VCE = 5V SFH615A-1 SFH615A-2 SFH615A-3 SFH615A-4 IF = 10mA, IC = 2.5mA Device Min 0.7 0.7 0.7 7 Typ 1.18 1.10 1.29 - Max 1.4 1.2 1.5 - Units V - 25 100 - A pF 50 - - V 70 - - V 7 - - V 5 - - V - 6 100 nA - 8 100 A 40 63 100 160 - - 100 125 200 320 0.3 % Collector-Emitter VCE Saturation Voltage (Sat) Input to Output Capacitance CIO VIO = 0, f = 1mhz (See note 2 below) 2 5 Input to Output Resistance RIO VIO = 500V (See note 2 below) 1011 Isolation Voltage VIO (See note 2 below) 7500 Delay Time td VCC = 5V, IC = 2mA 3.3 7 Rise Time tr RL = 100Ohms 5.0 8 Storage Time ts 0.4 0.8 Fall Time tf 4.8 8 Turn -on Time ton VCC = 5V, If = 5mA 4 15 Turn-off Time toff RL = 1KOhms 8 20 Notes 1. BVCEO and BVCBO can be selected to suit customer specifications. 2. Measured between input when leads 1, 2 and 3 are shorted together, and output when leads 4, 5 and 6 are shorted together. 3. A higher CTR can be selected to suit customer specification as a standard part. Isocom Ltd reserves the right to change the details on this specification without notice. Please consult Isocom Ltd prior to use. Isocom Ltd cannot accept liability for any errors or omissions. For sales enquiries, or further information, please contact our sales office at: Isocom Ltd, Hutton Close, Crowther Industrial Estate, District 3, Washington, NE38 0AH Tel: +44 0191 4166 546 Fax: +44 0191 4155 055 Email Isocom@isocomoptocouplers.com Or go to the Isocom Website @: Http://www.isocom.uk.com V V pF VDC S S S S S S