SCHRACK General Purpose Relays Power PCB Relay RT1 n 1 pole 12 / 16 A, 1 CO or 1 NO contact n DC- or AC-coil n Sensitive coil 400 mW n 5 kV / 10 mm coil-contact, reinforced insulation n Ambient temperature 85C (DC-coil) n WG version: Product in accordance to IEC60335-1 Applications Boiler control, timers, garage door control, POS automation, interface modules F0144-C Approvals V REG.-Nr. 6106, Z E214025, b 14385, B C0786 Technical data of approved types on request Contact data Contact configuration 1 CO or 1 NO contact Contact set single contact Type of interruption micro disconnection Rated voltage / max. switching voltage AC 250 / 400 VAC Rated current 12 A 16 A Limiting continuous current 12 A 16 A, UL: 20 A Maximum breaking capacity AC 3000 VA 4000 VA Limiting making capacity, max 4 s, df 10% 25 A 30 A Contact material AgNi 90/10, AgNi 90/10 gold plated Rated frequency of operation with / without load DC coil: 6 / 1200 min-1 AC coil: 6 / 600 min-1 Operate- / release time DC coil max 8 / 6 ms Bounce time DC coil, NO / NC contact max 4 / 6 ms Contact ratings Type Contact IEC 61810 RT314 DC-coil RT314 DC-coil RT314 DC-coil RT114 DC-coil RT114 AC-coil UL 508 RT314 RT334 RT314 EN60947-5-1 RT314 DC-coil EN60730-1 RT314 DC-coil NO CO NO NO NO Load 16 A, 16 A, 10 A, 12 A, 12 A, 250 VAC, 250 VAC, 400 VAC, 250 VAC, 250 VAC, cos=1 cos=1 cos=1 cos=1 cos=1 NO / NC 20 A, 250 VAC, general purpose NO 16 A, 250 VAC, general purpose NO 1 hp, 240 VAC Ambient temp. [C] Cycles 85C 85C 85C 85C 70C 30x103 10x103 150x103 50x103 100x103 85C 85C 40C 6x103 50x103 1x103 NO / NC 2 A, 24 VDC DC13 NO 12(2) A, 250 VAC 6.050 85C 100x103 Coil data Rated coil voltage range DC coil AC coil Operative range to IEC 61810 Coil insulation system according UL1446 5...110 VDC 24...230 VAC 2 class F 1 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RT1 (Continued) Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 005 5 3.5 0.5 62+10% 403 006 6 4.2 0.6 90+10% 400 009 9 6.3 0.9 200+10% 400 012 12 8.4 1.2 360+10% 400 024 24 16.8 2.4 1440+10% 400 048 48 33.6 4.8 5520+10% 417 060 60 42.0 6.0 8570+12% 420 110 110 77.0 11.0 28800+12% 420 All figures are given for coil without preenergization, at ambient temperature +23C Other coil voltages on request Coil versions, AC-coil 50Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power 50 Hz 50 Hz 50 Hz VAC VAC VAC Ohm VA 524 24 18.0 3.6 350+10% 0.76 615 115 86.3 17.3 8100+15% 0.76 620 120 90.0 18.0 8800+15% 0.75 700 200 150.0 30.0 24350+15% 0.76 730 230 172.5 34.5 32500+15% 0.74 All figures are given for coil without preenergization, at ambient temperature +23C Insulation Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 61810-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree 12 A version 16 A version Rated voltage system Overvoltage category 5000 Vrms 1000 Vrms W 10 / 10 mm IIIa PTI 250 V reinforced micro disconnection 250 V 3 3 3 2 240 V 230 / 400 V III Other data Mechanical endurance DC coil > 30 x 106 cycles AC coil > 10 x 106 cycles Material RoHS - Directive 2002/95/EC compliant as per product date code 0413 Resistance to heat and fire, WG version according EN60335-1, par.30 Environment Ambient temperature range DC coil -40...+85C AC coil -40...+70C Vibration resistance (function), NO / NC cont. 20 / 5 g, 30 ... 500 Hz Shock resistance (destruction) 100 g Category of protection RTII - flux proof, RTIII - wash tight Processing Mounting pcb or on socket Mounting position any Mounting distance DC / AC coils W 0 / W 2.5 mm Resistance to soldering heat flux-proof version 270C / 10 s wash-tight version 260C / 5 s Relay weight 14 g Packaging unit 20 / 500 pcs Accessories For details see datasheet Accessories Power Relay RT 2 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RT1 (Continued) Dimensions S0272-BB *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. PCB layout / terminal assignment Bottom view on solder pins 12 A, pinning 3.5 mm 12 A, pinning 5 mm 16 A, pinning 5 mm S0418-CB 1 CO contact S0418-CN 1 CO contact 1 CO contact S0163-BG 1 NO contact S0418-CA S0163-BC 1 NO contact 1 NO contact S0163-BF S0163-BD S0163-BH Product key S0163-BE Typical product key RT 3 1 4 024 Type RT Power PCB Relay RT1 Version 1 12 A, pinning 3.5 mm, flux proof B 2 12 A, pinning 5 mm, flux proof *) 3 16 A, pinning 5 mm, flux proof D Contact configuration 1 1 CO contact (1 form C) 3 Contact material 4 AgNi 90/10 5 Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 Preferred types in bold print *) Wash tight version on request 12 A, pinning 3.5 mm, wash tight 16 A, pinning 5 mm, wash tight 1 NO contact (1 form A) AgNi 90/10 gold plated (for type RT31.) (domestic appliances) 3 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change. SCHRACK General Purpose Relays Power PCB Relay RT1 (Continued) Product key RT114005 RT114006 RT114012 RT114024 RT114048 RT114110 RT114524 RT114615 RT114730 RT134012 RT134024 RT214012 RT214024 RT314005 RT314006 RT314012 RT314024 RT314048 RT314060 RT314110 RT314524 RT314615 RT314730 RT315012 RT315024 RT315730 RT334012 RT334024 RT334048 RTB14005 RTB14012 RTB14024 RTB14048 RTD14005 RTD14006 RTD14012 RTD14015 RTD14024 RTD14048 RTD34005 RTD34012 RTD34024 Version 12 A pinning 3.5 mm flux proof Contacts 1 CO contact Cont. material AgNi 90/10 Coil DC-coil AC-coil 1 NO contact 12 A, pinning 5mm flux proof 16 A pinning 5 mm flux proof DC-coil 1 CO contact AC-coil AgNi 90/10 gold plated 1 NO contact 12 A pinning 3.5 mm wash tight AgNi 90/10 1 CO contact 16 A pinning 5 mm wash tight 1 NO contact DC-coil AC-coil DC-coil Coil 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 110 VDC 24 VAC 115 VAC 230 VAC 12 VDC 24 VDC 12 VDC 24 VDC 5 VDC 6 VDC 12 VDC 24 VDC 48 VDC 60 VDC 110 VDC 24 VAC 115 VAC 230 VAC 12 VDC 24 VDC 230 VAC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 6 VDC 12 VDC 15 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC Part number 1393239-7 1393239-8 1419108-1 1-1393239-3 1-1393239-4 1-1393239-6 1-1393239-7 1-1393239-8 1-1393239-9 2-1393239-6 3-1393239-0 5-1393239-4 5-1393239-5 9-1393239-1 9-1393239-3 9-1393239-5 9-1393239-8 1393240-1 1393240-2 1393240-3 1393240-4 1393240-6 1393240-7 1-1393240-1 1-1393240-4 1-1419108-1 4-1393240-5 4-1393240-8 5-1393240-0 1-1393238-2 1-1393238-5 1-1393238-9 2-1393238-1 5-1393238-9 6-1393238-0 6-1393238-2 6-1393238-4 6-1393238-8 6-1393238-9 8-1393238-3 3-1419108-5 3-1419108-8 4 Datasheet Rev. IJ1 Issued 2009/10 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change.