DETAIL A
SCALE=6X
.016±.002
FINISH:
SEE NOTE
SEE NOTE
A
B
C
D
7
8
A
B
C
D
12
3
4
5
6
TNIRD ANGLE
.XXX
TO OTHERS. REPRODUCED OR USED FOR
OF TYCO. MUST BE RETURNED TO TYCO (HTS668-U)
ELECTRONICS. NOT TO BE DISCLO SED
7
ANGLES
ANY PURPOSES EXCEPT AS AUTHORIZED
ON DEMAND, ON COMPLETI ON OF ORDERS
8
C-9-1542004-7
DWG. NO.
ASSEMBLY
31mm HEATSINK
TOLERANCES ARE:
UNLESS OTHERWISE
SPECIFIED
.XX
.
DATE
DRAWN BY:
ENGINEER:
E.TAO 01/07/04
TITLE:
SIZE:
1.5:1
REV:
B
SCALE: PART NO: 9-1542004-7
A
.
.XXXX
PROJECTION
DIMENSONS ARE IN:
INCHES
FILENAME
SHEET:
IN WRITING BY AN AUTHORIZED OFFICIAL
. 1 OF 1
PROJECT SYSTEM
CONFIDEN TIAL PROPERTY OF TYC O
OR OTHER PURPOSES FOR WHICH LENT.
DO NOT SCALE
DATE MATERIAL:
1. MATERIAL:
HEAT SINK: ALUM. (BLACK ANODIZE)
CLIP: BLACK PEI (UL94-VO)
2. BEFORE THE HEATSINK APPLICATION, THE USER
SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM
LOAD ON THE BGA PACKAGE.
HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE.
BARE DIE PACKAGE:
1.5 POUND-FORCE INCH TORQUE = 7.5 POUND-FORCE
(0.17 NEWTON TORQUE = 33.36 NEWTON)
2.0 POUND-FORCE INCH TORQUE = 10.0 POUND-FORCE
(0.23 NEWTON METER TORQUE = 44.48 NEWTON)
FULL SIZE LID PACKAGE:
1.5 POUND-FORCE INCH TORQUE = 6.9 POUND-FORCE
(0.17 NEWTON TORQUE = 30.69 NEWTON)
2.0 POUND-FORCE INCH TORQUE = 9.3 POUND-FORCE
(0.23 NEWTON METER TORQUE = 41.37 NEWTON)
3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1.
4. RoHS COMPLIANT AND CERTIFIED.
SECTION B-B
3/4 -27 UNS - 2A
THREAD
.479
1.232
1.375 DIA.
0.479 HT.
4-LEG CLIP SIZE: 31mm
3-FIN HEAT SINK:
A
1.350
.272
1.226
±.005
MAX.349
LIP LEG
1.375±.020
.135
.142±.005 B
B
2
1
3
REVISION(S)
LTR DESCRIPTION INIT APP'D
A E CN: 0S60-0002-04 S .D 1/ 7/04 C.R 1/7/04
B E CR-06-014978 E . T 6/ 30/ 06 V. K 7/5/ 06
ITEM DESCRIPTION QTY
1 MOUNTING CLIP 1
2HEAT SINK1
3INTERFACE1
CUST OMER DRAWING
S P ECIFICATIONS A RE S UB JE C T TO CHANGE WITHO UT NOTICE
Power ° C/ W @
Ambient ° C/ W @
200 LFM ° C/ W @
400 LFM ° C/W @
600 LFM
5 Wat t s 13. 25 6. 13 4. 35 3. 14
10 Wat t s 11. 82 6. 04 3. 99 2. 93
15 Wat t s 10. 75 5. 89 3. 96 2. 99
