C1206C105M3RAC3124 - KEMET ELECTRONICS

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

CERAMIC CHIP CAPACITORS

Ceramic Surface Mount

C0805 C103 K 5 R A C*

CERAMIC

SIZE CODE

SPECIFICATION

C - Standard

CAPACITANCE CODE

Expressed in Picofarads (pF)

First two digits represent significant figures.

Third digit specifies number of zeros. (Use 9

for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF)

(Example: 2.2pF = 229 or 0.50 pF = 508)

CAPACITANCE TOLERANCE

B – ±0.10pF J – ±5%

C – ±0.25pF K – ±10%

D – ±0.5pF M – ±20%

F – ±1% P – (GMV) – special order only

G – ±2% Z – +80%, -20%

DIMENSIONS—MILLIMETERS AND (INCHES)

CAPACITOR ORDERING INFORMATION

• C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics

• 10, 16, 25, 50, 100 and 200 Volts

• Standard End Metalization: Tin-plate over nickel

barrier

• Available Capacitance Tolerances: ±0.10 pF; ±0.25

pF; ±0.5 pF; ±1%; ±2%; ±5%; ±10%; ±20%; and

+80%-20%

• Tape and reel packaging per EIA481-1. (See page

92 for specific tape and reel information.) Bulk

Cassette packaging (0402, 0603, 0805 only) per

IEC60286-6 and EIAJ 7201.

• RoHS Compliant

FEATURES

CAPACITOR OUTLINE DRAWINGS

END METALLIZATION

C-Standard (Tin-plated nickel barrier)

FAILURE RATE LEVEL

A- Not Applicable

TEMPERATURE CHARACTERISTIC

Designated by Capacitance

Change Over Temperature Range

G – C0G (NP0) (±30 PPM/°C)

R – X7R (±15%) (-55°C + 125°C)

P– X5R (±15%) (-55°C + 85°C)

U – Z5U (+22%, -56%) (+10°C + 85°C)

V – Y5V (+22%, -82%) (-30°C + 85°C)

VOLTAGE

1 - 100V 3 - 25V

2 - 200V 4 - 16V

5 - 50V 8 - 10V

TIN PLATE

NICKEL PLATE

CONDUCTIVE

METALLIZATION

ELECTRODES

* Part Number Example: C0805C103K5RAC (14 digits - no spaces)

(Standard Chips - For

Military see page 87)

9 - 6.3V

7 - 4V

* Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk bassette, see page 96.)

+ For extended value 1210 case size - solder reflow only.

1 - 100V 3 - 25V

2 - 200V 4 - 16V

5 - 50V 8 - 10V

6 - 35V 9 - 6.3V

7 - 4V

EIA SIZE

CODE METRIC

SIZE CODE L - LENGTH W - WIDTH T

THICKNESS B - BANDWIDTH S

SEPARATION

minimum

MOUNTING

TECHNIQUE

0201* 0603 0.6 (.024) ± .03 (.001) 0.3 ± (.012) ± .03 (.001) 0.15 (.006) ± .05 (.002) N/A

0402* 1005 1.0 (.04) ± .05 (.002) 0.5 (.02) ± .05 (.002) 0.20 (.008) -.40 (.016) 0.3 (.012)

0603 1608 1.6 (.063) ± .15 (.006) 0.8 (.032) ± .15 (.006) 0.35 (.014) ± .15 (.006) 0.7 (.028)

0805* 2012 2.0 (.079) ± .20 (.008) 1.25 (.049) ± .20 (.008) 0.50 (.02) ± .25 (.010) 0.75 (.030)

1206* 3216 3.2 (.126) ± .20 (.008) 1.6 (.063) ± .20 (.008) 0.50 (.02) ± .25 (.010) N/A

1210* 3225 3.2 (.126) ± .20 (.008) 2.5 (.098) ± .20 (.008) 0.50 (.02) ± .25 (.010) N/A

1808 4520 4.5 (.177) ± .30 (.012) 2.0 (.079) ± .20 (.008) 0.60 (.024) ± .35 (.014) N/A

1812 4532 4.5 (.177) ± .30 (.012) 3.2 (.126) ± .30 (.012) 0.60 (.024) ± .35 (.014) N/A

1825* 4564 4.5 (.177) ± .30 (.012) 6.4 (.252) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A

2220 5650 5.6 (.220) ± .40 (.016) 5.0 (.197) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A

2225 5664 5.6 (.220) ± .40 (.016) 6.3 (.248) ± .40 (.016) 0.60 (.024) ± .35 (.014) N/A

Solder Wave +

Solder Reflow

See page 78

for thickness

dimensions.

Solder Reflow

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

CERAMIC CHIP/STANDARD

100

120

150

180

220

270

330

390

470

560

680

820

1000

1200

1500

1800

2200

2700

3300

3900

4700

5600

6800

8200

10,000

12,000

15,000

18,000

22,000

27,000

33,000

CAP.

100

120

150

180

220

270

330

390

470

560

680

820

101

121

151

181

221

271

331

391

471

561

681

821

102

122

152

182

222

272

332

392

472

562

682

822

103

123

153

183

223

273

333

CAP

CODE

CAP.

TOL.

C0G CAPACITANCE RANGE – 1210, 1812, 1825, 2220, 2225

X7R CAPACITANCE RANGE – 0402, 0603, 0805, 1206

*Capacitance K or M. ontact KEMET Sales Rep for J tolerance availability. +_ Reflow Only.

NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.

# X7R dielectric - Extended Range Values - Cap and DF measured @ 0.5 Vrms.

See page 63 for Thickness Code Reference Chart.

Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option.

Reels with such substitutions will be marked with the improved KEMET part numbers.

See page 78 for Thickness Code Reference Chart.

10V 16V 25V 50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V

0.5-2.4 508-24

D . FB FB FB FB FB FB

2.7-9.1 279-91

D K

MFBFBFBFB FB FB

10.0-13.0 100-13

D J

MFBFBFBFB FB FB

15.0-24.0 150-24

D G

MFBFBFBFB FB FB

27.0-51.0 270-51

MFBFBFBFB FB FB

56.0-82.0 560-82

MFBFBFBFB FB FB

91.0-360.0 910-361 F

MFBFBFBFB FB FB

390.0 391 F

MFBFBFBFB FB FB

430.0 431 F

MFBFBFBFB FB FB

470.0 471 F

MFBFBFBFB FB FBGBGBGB

510.0 511 F

MFBFBFBFB FB FB

560.0 561 F

MFBFBFBFB FB FBGBGBGB

620.0 621 F

MFBFBFBFB FB FB

680.0 681 F

MFBFBFBFB FB FBGBGBGB

750.0 751 F

MFBFBFBFB FB FB

820.0 821 F

MFBFBFBFB FB FBGBGBGB

910.0 911 F

MFBFBFBFB FB FB

000.0 102 F

MFBFBFBFB FB FBGBGBGB

100.0 112 F

MFBFBFBFB FB FB

200.0 122 F

MFBFBFBFB FB FBGBGBGB

300.0 132 F

MFBFBFBFB FB FC

500.0 152 F

MFBFBFBFB FB FEGBGBGB

600.0 162 F

MFBFBFBFB FB FE

800.0 182 F

MFBFBFBFB FB FEGBGBGB

000.0 202 F

MFBFBFBFB FC FE

200.0 222 F

MFBFBFBFB FC FGGBGBGB

400.0 242 F

MFBFBFBFB FC FC

700.0 272 F

MFBFBFBFB FC FCGBGBGB

000.0 302 F

MFBFBFBFB FC FF

300.0 332 F

MFBFBFBFB FF FFGBGBGB

600.0 362 F

MFBFBFBFB FF FF

900.0 392 F

MFBFBFBFB FF FFGBGBGBHBHB HB

300.0 432 F

MFBFBFBFB FF FF

700.0 472 F

MFFFFFFFFFG FGGBGBGDHBHB HB KBKB KB

100.0 512 F

MFBFBFBFB FG FG

600.0 562 F

MFBFBFBFB FG FGGB GBGHHBHB HB KB KB KB

200.0 622 F

MFBFBFBFB FG

800.0 682 F

MFBFBFBFB FG GBGB GJ HBHB HB JB JB KB KB KB

500.0 752 F

MFCFCFCFC FC

200.0 822 F

MFCFCFCFC FC GBGH HB HB HB JB JB KB KB KB

100.0 912 F

MFEFEFEFE FE

000.0 103 F

MFFFFFFFF FF GBGH HBHB HE JB JB KBKB KB

000.0 123 F

MFGFGFGFG FB GB GG HB HB HE JB JB KB KB KB

000.0 153 F

MFGFGFGFG FB GB GB HB HB JB JB KB KB KE

000.0 183 F

MFBFBFBFB FB GBGB HBHE JB JB KB KB

000.0 223 F

MFBFBFBFB FB GBGB HBHE JB JB KB KB

000.0 273 F

MFBFBFBFB FB GBGB HBHF JB JB KB KE

000.0 333 F

MFBFBFBFB FB GBGB JB JB KB

000.0 473 F

MFBFBFBFB FE GBGB JB JB

000.0 563 F

MFBFBFBFB FF GBGB JB JB

000.0 683 F

MFBFBFBFC FG GBGB JB JB

000.0 823 F

MFC FC FC FF FH GB GB JB JB

100

000.0 104 F

M FE FE FE FG FM+ GB GD JB JB

120

000.0 124 F

MFGFGFGFH GB GH JB JB

150

000.0 154 F

M FH FH FH FM+ GD GN JB JB

220

000.0 224 F

M FK+ FK+ FK+ GK JB JD

270

000.0 274 F

M JB JF

330

000.0 334 F

M JD JH

470

000.0 474 F

M JG

560

000.0 564 F

Cap

pF Cap

Code Cap

Tolerance C1210* C1812* C1825* C2220 C2225

6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 100V 200V 6.3V 10V 16V 25V 50V 100V 200V 6.3V 10V 16V 25V 50V 100V 200V

150 151 J, K, M BB BB BB BB BB

180 181 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

220 221 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

270 271 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

330 331 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

390 391 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

470 471 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

560 561 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

680 681 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

820 821 J, K, M BB BB BB BB BB CB CB CB CB CB CB CB DC DC DC DC DC DC DC

1,00

102 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

1,20

122 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

1,50

152 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

1,80

182 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

2,20

222 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

2,70

272 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

3,30

332 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

3,90

392 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

4,70

472 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

5,60

562 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

6,80

682 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

8,20

822 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

10,00

103 J, K, M BBBBBBBBBBCBCBCBCBCBCBCBDCDCDCDCDCDCDCEBEBEBEBEBEBEB

12,00

123 J, K, M BBBBBBBBBBCBCBCBCBCBCB DCDCDCDCDCDCDCEBEBEBEBEBEBEB

15,00

153 J, K, M BBBBBBBBBBCBCBCBCBCBCB DCDCDCDCDCDDDCEBEBEBEBEBEBEB

18,00

183 J, K, M BBBBBBBBBBCBCBCBCBCBCB DCDCDCDCDCDDDCEBEBEBEBEBEBEB

22,00

223 J, K, M BBBBBBBBBBCBCBCBCBCBCB DCDCDCDCDCDDDCEBEBEBEBEBEBEB

27,00

273 J, K, M BBBBBBBB CBCBCBCBCBCB DCDCDCDCDCDDDEEBEBEBEBEBEBEB

33,00

333 J, K, M BBBBBBBB CBCBCBCBCBCB DCDCDCDCDCDDDEEBEBEBEBEBEBEB

39,00

393 J, K, M BBBBBBBB CBCBCBCBCBCB DCDCDCDCDCDDDEEBEBEBEBEBECEB

47,00

473 J, K, M BBBBBBBB CBCBCBCBCBCB DCDCDCDCDCDEDGEBEBEBEBEBECED

56,00

563 J, K, M BBBBBB CBCBCBCBCB DDDDDDDDDDDEDGEBEBEBEBEBEBED

68,00

683 J, K, M BBBBBB CBCBCBCBCB DDDDDDDDDDDE EBEBEBEBEBEBED

82,00

823 J, K, M BBBBBB CBCBCBCBCB DDDDDDDDDDDE EBEBEBEBEBEBED

100,00

104 J, K, M BBBBBB CBCBCBCBCB DDDDDDDDDDDE EBEBEBEBEBEBEM

120,00

124 J, K, M CBCBCB CB DCDCDCDCDDDG ECECECECECECEM

150,00

154 J, K, M CBCBCB CD DCDCDCDCDD ECECECECECECEG

180,00

184 J, K, M CBCBCB DCDCDCDCDD ECECECECECEC

220,00

224 J, K, M CBCBCBCD DCDCDCDCDDDG ECECECECECEC

270

274 J

M CBCBCB DDDDDDDD EBEBEBEBECEM

330,00

334 J, K, M CB CB CB DD DD DD DD DD EB EB EB EB EC EG

390,00

394 J, K, M CB CB CB DG DG DG DG DE EB EB EB EB EC EG

470,00

474 J, K, M CBCBCB DDDDDDDDDE ECECECECECEG

560,00

564 J, K, M DD DD DD DG DH ED ED ED ED EC

680,00

684 J, K, M DD DD DD DG DH EE EE EE EE ED

820,00

824 J, K, M DD DD DD DG EF EF EF EF ED

1,000,00

105 J, K, M CC* CC* CC* DD DD DD DG EF EF EF EG ED

1,200,00

125 J, K, M DE DE DE ED ED ED EG EH

1,500,00

155 J, K, M DG DG DG EF EF EF EG EH

1,800,00

185 J, K, M DG DG DG EF EF EF EH

2,200,00

225 J, K, M DG DG DG ED ED ED EF EH

2,700,00

275 J, K, M EN EN EN

3,300,00

335 J, K, M ED ED ED EH

3,900,00

395 J, K, M EF EF EF

4,700,00

475 J, K, M EF+ EF+ EF+ EH+

5,600,00

565 J, K, M EH+ EH+ EH+

6,800,00

685 J, K, M EH+ EH+ EH+

8,200,00

825 J, K, M EH+ EH+ EH+

10,000,00

106 J, K, M EH+ EH+ EH+

C1206C0805C0402

Cap

pF Cap

Code Cap Tol C0603

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630

* Capacitance tolerance K or M. Contact your local KEMET Sales Rep for J tolerance availablity. + Reflow Only ° M tolerance only

NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.

50 Volt Ceramic Chips can be used for 63 volt applications.

# Extended Range Values – Cap and DF measured @ 0.5 Vrms.

Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option.

Reels with such substitutions will be marked with the improved KEMET part numbers.

CERAMIC CHIP/STANDARD

X7R CAPACITANCE RANGE – 1210, 1808, 1812, 1825, 2220, 2225

NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.

50 Volt Ceramic Chips can be used for 63 volt applications.

* EIA preferred chip sizes

+ Reflow only

See page 78 for Thickness Code Reference Chart

Y5V CAPACITANCE RANGE

Ceramic Surface Mount

6.3V 10V 16V 6.3V 10V 16V 25V 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V

000 223 Z BB BB BB CB CB CB CB DC EB

000 273 Z BB BB BB CB CB CB CB DC EB

000 333 Z BB BB BB CB CB CB CB DC EB

000 393 Z BB BB BB CB CB CB CB DD EB

000 473 Z BB BB BB CB CB CB CB DD EB

000 563 Z BB BB BB CB CB CB CB DD EB

000 683 Z BB BB BB CB CB CB CB DD EB

000 823 Z BB BB BB CB CB CB CB DD EB

100

000 104 Z BB BB BB CB CB CB CB DD EB

120

000 124 ZCC CC CC CC DC DC DC DC

150

000 154 Z CC CC CC CC DC DC DC DC

180

000 184 Z CC CC CC CC DC DC DC DC

220

000 224 Z BB CC CC CC CC DC DC DC DC DD EC EC EC EC FD FD FD FD FD

270

000 274 Z CC CC CC CC DC DC DC DC EB EB EB EB FD FD FD FD FD

330

000 334 Z CC CC CC CC DC DC DC DC EB EB EB EB FD FD FD FD FD

390

000 394 Z CC CC CC DC DC DC DC EB EB EB EB FD FD FD FD FD

470

000 474 Z BB CC CC CC DC DC DC DC EC EC EC EC FD FD FD FD FD

560

000 564 Z CC CC DD DD DD DD EB EB EB EB FD FD FD FD FD

680

000 684 Z CC CC DE DE DE DE EB EB EB EB FD FD FD FD FD

820

000 824 Z CC CC DG DG DG DG EB EB EB EB FF FF FF FF FF

000

000 105 Z BB CC CC DG DG DG DG EG EG EG EG FH FH FH FH FH

200

000 125 Z DC DC DC EC EC EC FD FD FD

500

000 155 Z DC DC DC EC EC EC FD FD FD

800

000 185 Z DD DD DD EC EC EC FD FD FD

200

000 225 Z DD DD DD EE EE EE FD FD FD

300

000 335 Z DE DE DH EF EF EF FE FE FE

700

000 475 Z DH DH DH EM EM EM FG FG FG

600

000 565 Z DH DH EJ EJ EJ FG FG FG

800

000 685 Z DH DH EJ EJ FH FH FH

000

000 106 ZDH DH EJ EJ FH FH FH

000

000 156 Z FH FH FH

000

000 226 Z EH FT FT FM

Cap

pF Cap

Code Cap

Tol. C0402* C1210*C0603* C1206*C0805*

6.3V 10V 16V 25V 50V 100V 200V 50V 100V 200V 25V 50V 100V 200V 50V 100V 200V 25V 50V 100V 200V 50V 100V 200V

2,200 222 J,K,M FB FB FB FB FB FB FB

2,700 272 J,K,M FB FB FB FB FB FB FB

3,300 332 J,K,M FB FB FB FB FB FB FB

3,900 392 J,K,M FB FB FB FB FB FB FB

4,700 472 J,K,M FB FB FB FB FB FB FB LD LD LD

5,600 562 J,K,M FB FB FB FB FB FB FB LD LD LD

6,800 682 J,K,M FB FB FB FB FB FB FB LD LD LD GB GB GB GB

8,200 822 J,K,M FB FB FB FB FB FB FB LD LD LD GB GB GB GB

10,000 103 J,K,M FB FB FB FB FB FB FB LD LD LD GB GB GB GB

12,000 123 J,K,M FB FB FB FB FB FB FB LD LD LD GB GB GB GB

15,000 153 J,K,M FB FB FB FB FB FB FB LD LD LD GB GB GB GB

18,000 183 J,K,M FB FB FB FB FB FB FB LD LD LD GB GB GB GB

22,000 223 J,K,M FB FB FB FB FB FB FB LD LD GB GB GB GB HB HB HB

27,000 273 J,K,M FB FB FB FB FB FB FB LD LD GB GB GB GB HB HB HB

33,000 333 J,K,M FB FB FB FB FB FB FB LD LD GB GB GB GB HB HB HB

39,000 393 J,K,M FB FB FB FB FB FB FB LD LD GB GB GB GB HB HB HB

47,000 473 J,K,M FB FB FB FB FB FB FC LD LD GB GB GB GB HB HB HB KC KC KC

56,000 563 J,K,M FB FB FB FB FB FB FC LD LD GB GB GB GB HB HB HB KC KC KC

68,000 683 J,K,M FB FB FB FB FB FB FC LD GB GB GB GB HB HB HB KC KC KC

82,000 823 J,K,M FB FB FB FB FB FC FF LD GB GB GB GB HB HB HB JC KC KC KC

100,000 104 J,K,M FB FB FB FB FB FD FG LD GB GB GB GB HB HB HB JC KC KC KC

120,000 124 J,K,M FB FB FB FB FB FD LD GB GB GB GB HB HB HB JC KC KC KC

150,000 154 J,K,M FC FC FC FC FC FD LD GB GB GB GE HB HB HB JC KC KC KC

180,000 184 J,K,M FC FC FC FC FC FD LD GB GB GB GF HB HB HB JC KC KC KC

220,000 224 J,K,M FC FC FC FC FC FD GB GB GB GG HB HB HB JC KC KC KC

270,000 274 J,K,M FC FC FC FC FC FD GB GB GG GG HB HB HB JC JC JC JC KB KC KC

330,000 334 J,K,M FD FD FD FD FD FD GB GB GG GG HB HB HB JC JC JC JC KB KC KC

390,000 394 J,K,M FD FD FD FD FD GB GB GG GG HB HB HD JC JC JC JC KB KC KC

470,000 474 J,K,M FD FD FD FD FD FD GB GB GG GJ HB HB HD JC JC JC JC KB KC KD

560,000 564 J,K,M FD FD FD FD FD GC GC GG HB HD HD JC JC JC JD KB KC KD

680,000 684 J,K,M FD FD FD FD FD GC GC GG HB HD HD JC JC JD JD KB KC KD

820,000 824 J,K,M FF FF FF FF FF GE GE GG HB HF JC JC JF JF KB KC KE

1,000,000 105 J,K,M FH FH FH FH FH FM GE GE GG HB HF JC JC JF JF KB KD KE

1,200,000 125 J,K,M FH FH FH FH FG HB JC JC KB KE

1,500,000 155 J,K,M FH FH FH FH FG HC JC JC KC

1,800,000 185 J,K,M FH FH FH FH FG HD JD JD KD

2,200,000 225 J,K,M FJ FJ FJ FJ FG FT* GO° HF JF JF KD

2,700,000 275 J,K,M FE FE FE

3,300,000 335 J,K,M FF FF FF FM FM

3,900,000 395 J,K,M FG FG FG

4,700,000 475 J,K,M FC+ FC+ FC+ FG+ FS+ GK* GK*

5,600,000 565 J,K,M FF+ FF+ FF+

6,800,000 685 J,K,M FG+ FG+ FG+ FM+

8,200,000 825 J,K,M FH+ FH+ FH+

10,000,000 106 J,K,M FH+ FH+ FH+ FS+ GK* JF JO

12,000,000 126 J,K,M

15,000,000 156 J,K,M JO

18,000,000 186 J,K,M

22,000,000 226 J,K,M FS+ FS+ JO

47,000,000 476 M FS+

C2220 C2225C1825

Cap

pF Cap

Code Cap Tol. C1812C1210 C1808

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

CERAMIC CHIP CAPACITORS

This ch

Thickness Code Reference Chart

Packaging Quantity Based on Finished Chip Thickness Specifications

This chart refers to ceramic chip thickness codes on pages 73 – 76.

Note: TU suffix represents tape and reel packaging of unmarked components.

Note: TM suffix represents tape and reel packaging of marked components.

Cases sizes d1210 are 8mm tape with 4mm pitch and Case Sizes >1210 are 12mm tape and 8mm pitch.

art refers to ceramic chip thickness codes on pages 73-76.

Thickness

Code Chip

Size Chip Thickness

Range (mm) Qty per Reel

7" Plastic Qty per Reel

13" Plastic Qty per Reel

7" Paper Qty per Reel

13" Paper Qty per Bulk

Cassette

A 0201 0.30 ± 0.03 N/A N/A 15,000 N/A N/A

BB 0402 0.50 ± 0.05 N/A N/A 10,000 50,000 50,000

CB 0603 0.80 ± 0.07 N/A N/A 4,000 10,000 15,000

CC 0603 0.80 ± 0.10 N/A N/A 4,000 10,000 N/A

CD 0603 0.80 ± 0.15 N/A N/A 4,000 10,000 N/A

DB 0805 0.60 ± 0.10 N/A N/A 4,000 10,000 10,000

DC 0805 0.78 ± 0.10 N/A N/A 4,000 10,000 N/A

DD 0805 0.90 ± 0.10 N/A N/A 4,000 10,000 N/A

DE 0805 1.00 ± 0.10 2,500 10,000 N/A N/A N/A

DF 0805 1.10 ± 0.10 2,500 10,000 N/A N/A N/A

DG 0805 1.25 ± 0.15 2,500 10,000 N/A N/A N/A

DH 0805 1.25 ± 0.20 2,500 10,000 N/A N/A N/A

DJ 0805 1.25 ± 0.20 3,000 N/A N/A N/A N/A

DK 0805 1.25 ± 0.15 3,000 N/A N/A N/A N/A

DL 0805 0.95 ± 0.10 4,000 10,000 N/A N/A N/A

EB 1206 0.78 ± 0.10 4,000 10,000 4,000 10,000 N/A

EC 1206 0.90 ± 0.10 4,000 10,000 N/A N/A N/A

ED 1206 1.00 ± 0.10 2,500 10,000 N/A N/A N/A

EE 1206 1.10 ± 0.10 2,500 10,000 N/A N/A N/A

EF 1206 1.20 ± 0.15 2,500 10,000 N/A N/A N/A

EG 1206 1.60 ± 0.15 2,000 8,000 N/A N/A N/A

EH 1206 1.60 ± 0.20 2,000 8,000 N/A N/A N/A

EJ 1206 1.70 ± 0.20 2,000 8,000 N/A N/A N/A

EK 1206 0.80 ± 0.10 2,000 8,000 N/A N/A N/A

EL 1206 1.15 ± 0.15 2,000 8,000 N/A N/A N/A

EM 1206 1.25 ± 0.15 2,500 10,000 N/A N/A N/A

EN 1206 0.95 ± 0.10 4,000 10,000 N/A N/A N/A

FB 1210 0.78 ± 0.10 4,000 10,000 N/A N/A N/A

FC 1210 0.90 ± 0.10 4,000 10,000 N/A N/A N/A

FD 1210 0.95 ± 0.10 4,000 10,000 N/A N/A N/A

FE 1210 1.00 ± 0.10 2,500 10,000 N/A N/A N/A

FF 1210 1.10 ± 0.10 2,500 10,000 N/A N/A N/A

FG 1210 1.25 ± 0.15 2,500 10,000 N/A N/A N/A

FH 1210 1.55 ± 0.15 2,000 8,000 N/A N/A N/A

FJ 1210 1.85 ± 0.20 2,000 8,000 N/A N/A N/A

FK 1210 2.10 ± 0.20 2,000 8,000 N/A N/A N/A

FL 1210 1.40 ± 0.15 2,000 8,000 N/A N/A N/A

FM 1210 1.70 ± 0.20 2,000 8,000 N/A N/A N/A

FN 1210 1.85 ± 0.20 2,000 8,000 N/A N/A N/A

FO 1210 1.50 ± 0.20 2,000 8,000 N/A N/A N/A

FP 1210 1.60 ± 0.20 2,000 8,000 N/A N/A N/A

FQ 1210 2.50 ± 0.22 1,500 N/A N/A N/A N/A

FR 1210 2.25 ± 0.20 2,000 8,000 N/A N/A N/A

FS 1210 2.50 ± 0.20 1,000 4,000 N/A N/A N/A

FT 1210 1.90 ± 0.20 1,500 4,000 N/A N/A N/A

LD 1808 0.90 ± 0.10 4,000 10,000 N/A N/A N/A

GB 1812 1.00 ± 0.10 1,000 4,000 N/A N/A N/A

GC 1812 1.10 ± 0.10 1,000 4,000 N/A N/A N/A

GD 1812 1.25 ± 0.15 1,000 4,000 N/A N/A N/A

GE 1812 1.30 ± 0.10 1,000 4,000 N/A N/A N/A

GF 1812 1.50 ± 0.10 1,000 4,000 N/A N/A N/A

GG 1812 1.55 ± 0.10 1,000 4,000 N/A N/A N/A

GH 1812 1.40 ± 0.15 1,000 4,000 N/A N/A N/A

GJ 1812 1.70 ± 0.15 1,000 4,000 N/A N/A N/A

GK 1812 1.60 ± 0.20 1,000 4,000 N/A N/A N/A

GL 1812 1.90 ± 0.20 1,000 4,000 N/A N/A N/A

GM 1812 2.00 ± 0.20 1,000 4,000 N/A N/A N/A

GN 1812 1.70 ± 0.20 1,000 4,000 N/A N/A N/A

GO 1812 2.50 ± 0.20 500 N/A N/A N/A N/A

HB 1825 1.10 ± 0.15 1,000 4,000 N/A N/A N/A

HC 1825 1.15 ± 0.15 1,000 4,000 N/A N/A N/A

HD 1825 1.30 ± 0.15 1,000 4,000 N/A N/A N/A

HE 1825 1.40 ± 0.15 1,000 4,000 N/A N/A N/A

HF 1825 1.50 ± 0.15 1,000 4,000 N/A N/A N/A

JB 2220 1.00 ± 0.15 1,000 4,000 N/A N/A N/A

JC 2220 1.10 ± 0.15 1,000 4,000 N/A N/A N/A

JD 2220 1.30 ± 0.15 1,000 4,000 N/A N/A N/A

JE 2220 1.40 ± 0.15 1,000 4,000 N/A N/A N/A

JF 2220 1.50 ± 0.15 1,000 4,000 N/A N/A N/A

JG 2220 1.70 ± 0.15 1,000 4,000 N/A N/A N/A

JH 2220 1.80 ± 0.15 1,000 4,000 N/A N/A N/A

JO 2220 2.40 ± 0.15 500 2,000 N/A N/A N/A

KB 2225 1.00 ± 0.15 1,000 4,000 N/A N/A N/A

KC 2225 1.10 ± 0.15 1,000 4,000 N/A N/A N/A

KD 2225 1.30 ± 0.15 1,000 4,000 N/A N/A N/A

KE 2225 1.40 ± 0.15 1,000 4,000 N/A N/A N/A

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

KEMET offers Multilayer Ceramic Chip Capacitors

packaged in 8mm and 12mm plastic tape on 7" and

13" reels in accordance with EIA standard 481-1:

Taping of surface mount components for automatic

handling. This packaging system is compatible with all

tape

fed

automatic

pick

and

place

systems. See page 78

for details on reeling quantities for commercial chips

and page 87 for MIL-PRF-55681 chips.

CERAMIC CHIP CAPACITORS

Packaging Information

Tape & Reel Packaging

8mm ±.30

(.315 ±.012")

12mm ±.30

(.472 ±.012")

178mm (7.00")

330mm (13.00")

Anti-Static Reel

Embossed Carrier*

0402 and 0603 case sizes

available on punched paper only.

Embossment

Anti-Static Cover Tape

(.10mm (.004") Max Thickness)

Chip Orientation

in Pocket

(except 1825 Commercial, and 1825 & 2225 Military)

* Punched paper carrier used for 0402 and 0603 case size.

handling. This packaging system is compatible with all

tape

fed

automatic

pick

and

place

systems. See page 81

for details on reeling quantities for commercial chips

and page 90 for MIL-PRF-55681 chips.

KEMET

Grid

placement

courtyard Z

2.14

2.78

3.30

4.50

5.90

7.00

0.28

0.68

0.70

1.50

2.30

3.30

0.74

1.08

1.60

2.00

2.90

3.70

6.90

5.50

6.80

Y(ref)

0.93

1.05

1.30

1.50

1.80

1.85

C(ref)

1.21

1.73

2.00

3.00

4.10

5.15

3.18

3.70

4.90

0.68

0.70

1.50

0.80

1.10

1.40

2.00

Y(ref)

1.25

1.50

1.70

Smin

1.93

2.20

3.20

Wave SolderReflow Solder

Calculation Formula

Z = Lmin + 2Jt + Tt

G = Smax - 2Jh -Th

X = Wmin + 2Js + Ts

Tt, Th, Ts = Combined tolerances

0402

0603

0805

1206

1210

1812

1825

2220

2225

Dimension

Not Recommended

Grid

Placement

Courtyard

SURFACE MOUNT LAND DIMENSIONS - CERAMIC CHIP CAPACITORS - MM

Packaging

Case Sizes ≤ 1210 are 8 mm tape with 4 mm pitch.

Case Sizes >1210 are 12 mm tape with 8 mm pitch.

Note: TU suffix represents tape and reel packaging of unmarked components.

TM suffix represents tape and reel packaging of marked components.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

Performance Notes

1. Cover Tape Break Force: 1.0 Kg Minimum.

2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:

Tape Width Peel Strength

8 mm 0.1 Newton to 1.0 Newton (10g to 100g)

12 mm 0.1 Newton to 1.3 Newton (10g to 130g)

The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier

tape shall be 165to 180from the plane of the carrier tape. During peeling, the carrier and/or cover tape

shall be pulled at a velocity of 300 ±10 mm/minute.

3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")

reels (with C-7280). Note that 13” reels are preferred.

4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.

Refer to EIA-556.

Embossed Carrier Tape Configuration: Figure 1

NOTES

1. B1 dimension is a reference dimension for tape feeder clearance only.

2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of

embossment location and hole location shall be applied independent of each other.

3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require

additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)

4. The cavity defined by A0,B0,and K0shall be configured to surround the part with sufficient clearance such that the chip does not pro-

trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical

restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm

maximum in the pocket (not applicable to vertical clearance.)

Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)

Constant Dimensions — Millimeters (Inches)

Tape Size D0EP

0P2T Max T1Max

8 mm 1.5 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 0.600 0.100

and +0.10 -0.0

12 mm (0.059 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.004)

+0.004, -0.0)

Variable Dimensions — Millimeters (Inches)

Tape Size Pitch B1Max. D1Min. F P1R Min. T2Max W A0B0K0

Note 1 Note 2 Note 3 Note 4

8 mm Single 4.4 1.0 3.5 ±0.05 4.0 ±0.10 25.0 2.5 8.0 ±0.30

(4 mm)

(0.173) (0.039) (0.138 ±0.002) (0.157 ±0.004) (0.984) (0.098) (.315 ±0.012)

12 mm Double 8.2 1.5 5.5 ±0.05 8.0 ±0.10 30.0 4.6 12.0 ±0.30

(8 mm) (0.323) (0.059) (0.217 ±0.002) (0.315 ±0.004) (1.181) (0.181) (0.472 ±0.012)

TANTALUM, CERAMIC AND

ALUMINUM CHIP CAPACITORS

Packaging Information

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

Embossed Carrier Tape Configuration (cont.)

Sketch D: Tape Camber (Top View)

Allowable camber to be 1 mm/250 mm.

250mm (9.843)

1mm (0.039) Max.

Table 2 – REEL DIMENSIONS (Metric will govern)

Figure 3: Reel Dimensions (Metric Dimensions will govern)

Tape Size A Max B* Min C D* Min N Min W1W2Max W3

8 mm 330.0 1.5 13.0 ± 0.20 20.2 50.0 8.4 14.4 7.9 Min

(12.992) (0.059) (0.512 ± 0.008) (0.795) (1.969) +1.5, -0.0 (0.567) (0.311)

See (0.331 10.9 Max

Note 3 +0.059, -0.0) (0.429)

12 mm 330.0 1.5 13.0 ± 0.20 20.2 Table 1 12.4 18.4 11.9 Min

(12.992) (0.059) (0.512 ± 0.008) (0.795) +2.0, -0.0 (0.724) (0.469)

(0.488 15.4 Max

+0.078, -0.0) (0.606)

TANTALUM, CERAMIC AND

ALUMINUM CHIP CAPACITORS

Packaging Information

Figure 2:

Tape Leader

& Trailer

Dimensions

(Metric

Dimensions

Will Govern)

400mm (15.75) Min.

20°

Packaging

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

20°

Maximum

component rotation.

Typical

component

center line

Punched Carrier (Paper Tape) Configuration (Ceramic Chips Only):

Table 1: 8 & 12mm Punched Tape

(Metric Dimensions Will Govern)

Variable Dimensions - Millimeters (Inches)

Note:

1. A0, B0 and T determined by the maximum dimensions to the ends of the terminals extending from the

body and/or the body dimensions of the component. The clearance between the ends of the terminals or

body of the component to the sides and depth of the cavity (A0, B0 and T) must be within 0.05mm (.002)

minimum and 0.50mm (.020) maximum. The clearance allowed must also prevent rotation of the component

within the cavity of not more than 20 degrees (see sketches A and B).

2. Tape with components shall pass around radius "R" without damage.

3. KEMET nominal thicknesses are: 0402 = 0.6mm and all others 0.95mm minimum.

8mm

and

12mm

1.5

+0.10, -0.0

(.059

+0.004, -0.0)

1.75 ±0.10

(.069 ±0.004)

4.0 ± 0.10

(.157 ± 0.004)

2.0 ± 0.05

(.079 ± 0.002)

0.10

(.004)

Max.

0.75

(.030)

Min.

0.75

(.030)

Min.

25 (.984)

See Note 2

Table 1

Tape

Size D0P0

EP2T1G1G2R Min.

8mm

1/2

Pitch

2.0 ± 0.10

(.079 ±.004)

See Require-

ments

Section 3.3 (d)

3.5 ± 0.05

(.138 ± .002)

8.0 ± 0.3

(.315 ± 0.012)

See Note 1

Table 1

1.1mm (.043)

Max. for Paper

Base Tape and

1.6mm (.063)

Max. for Non-

Paper Base

Compositions.

See Note 3.

Tape

Size P1W

FA0B0T

8mm 4.0 ± 0.10

(0.157 ± .004)

12mm 4.0 ± 0.10

(0.157 ± .004)

12mm

Double

Pitch

8.0 ± 0.10

(0.315 ± .004)

12.0 ± 0.3

(.472 ± .012)

5.5 ± 0.05

(.217 ± .002)

Table 1: 8 & 12mm Punched Tape

(Metric Dimensions Will Govern)

Constant Dimensions - Millimeters (Inches)

Sketch B:

Max. Component

Rotation - Front

Cross Sectional View

Sketch C:

Component Rotation - Top View

Center lines

of cavity

10 pitches cumulative

tolerance on tape

±0.2 (±0.008)

Top

Tape

Cover

User Direction of Feed

Max. Cavity Size

See Note 1

Table 1

Bottom

Tape

Cover

(Min.)

Sketch A:

Bending Radius

See Note 2

Table 1

CERAMIC CHIP CAPACITORS

Packaging Information

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

CERAMIC CHIP CAPACITORS

Packaging Information

CAPACITOR MARKING TABLE

(Marking Optional - Not Available

for 0402 Size or Y5V Dielectric)

0.10

0.11

0.12

0.13

0.15

0.16

0.18

0.20

0.22

0.24

0.27

0.30

0.33

0.36

0.39

0.43

0.47

0.51

0.56

0.62

0.68

0.75

0.82

0.91

0.25

0.35

0.40

0.45

0.50

0.60

0.70

0.80

0.90

1.0

1.1

1.2

1.3

1.5

1.6

1.8

2.0

2.2

2.4

2.7

3.0

3.3

3.6

3.9

4.3

4.7

5.1

5.6

6.2

6.8

7.5

8.2

9.1

2.5

3.5

4.0

4.5

5.0

6.0

7.0

8.0

9.0

100

110

120

130

150

160

180

200

220

240

270

300

330

360

390

430

470

510

560

620

680

750

820

910

250

350

400

450

500

600

700

800

900

1000

1100

1200

1300

1500

1600

1800

2000

2200

2400

2700

3000

3300

3600

3900

4300

4700

5100

5600

6200

6800

7500

8200

9100

2500

3500

4000

4500

5000

6000

7000

8000

9000

10,000

11,000

12,000

13,000

15,000

16,000

18,000

20,000

22,000

24,000

27,000

30,000

33,000

36,000

39,000

43,000

47,000

51,000

56,000

62,000

68,000

75,000

82,000

91,000

25,000

35,000

40,000

45,000

50,000

60,000

70,000

80,000

90,000

100,000

110,000

120,000

130,000

150,000

160,000

180,000

200,000

220,000

240,000

270,000

300,000

330,000

360,000

390,000

430,000

470,000

510,000

560,000

620,000

680,000

750,000

820,000

910,000

250,000

350,000

400,000

450,000

500,000

600,000

700,000

800,000

900,000

Alpha

Character

Numeral

901 2 3 4 5

Capacitance (pF) For Various Numeral Identifiers

1,000,000

1,100,000

1,200,000

1,300,000

1,500,000

1,600,000

1,800,000

2,000,000

2,200,000

2,400,000

2,700,000

3,000,000

3,300,000

3,600,000

3,900,000

4,300,000

4,700,000

5,100,000

5,600,000

6,200,000

6,800,000

7,500,000

8,200,000

9,100,000

2,500,000

3,500,000

4,000,000

4,500,000

5,000,000

6,000,000

7,000,000

8,000,000

9,000,000

10,000,000

11,000,000

12,000,000

13,000,000

15,000,000

16,000,000

18,000,000

20,000,000

22,000,000

24,000,000

27,000,000

30,000,000

33,000,000

36,000,000

39,000,000

43,000,000

47,000,000

51,000,000

56,000,000

62,000,000

68,000,000

75,000,000

82,000,000

91,000,000

25,000,000

35,000,000

40,000,000

45,000,000

50,000,000

60,000,000

70,000,000

80,000,000

90,000,000

Laser marking is available as an extra-cost option for

most KEMET ceramic chips. Such marking is two

sided, and includes a K to identify KEMET, followed by

two characters (per EIA-198 - see table below) to

identify the capacitance value. Note that marking is

not available for size 0402 nor for any Y5V chip. In

addition, the 0603 marking option is limited to the K

only.

Example shown is 1,000 pF capacitor.

KA3

Table 2 – Capacitance Values Available

In Bulk Cassette Packaging

0402

0603

0805

All

C0G

X7R

Y5V

All

109

221

104

All

181

331

102

392

103

273

104

224

Case

Size Dielectric Voltage

Min.

Cap

Value

Max.

Cap

Value

All

200

100

200

100

Terminations: KEMET nickel barrier layer with a tin overplate.

0.3

0.7

0.75

EIA

Size

Code

Length

Width

Thickness

Bandwidth

Minimum

Separation

Metric

Size

Code

Number of

Pcs/Cassette

50,000

15,000

10,000

0402

0603

0805

1.0 ± 0.05

1.6 ± 0.07

2.0 ± 0.10

0.5 ± 0.05

0.8 ± 0.07

1.25 ± 0.10

0.5 ± .05

0.8 ± .07

0.6 ± .10

0.2 to 0.4

0.2 to 0.5

0.5 to 0.75

1005

1608

2012

Table 1 – Capacitor Dimensions for Bulk

Cassette Packaging – Millimeters

Unit: mm

* Reference

110 ± 0.7

31.5 ±0

0.2

36 ±0

0.2

19.0*

5.0*

10*

53.3*

6.8 ± 0.1

8.8 ± 0.1

12.0 ± 0.1

3.0 ±0

0.2

2.0 ±0.1

1.5 ±0

0.1

Bulk Cassette Packaging (Ceramic Chips only)

(Meets Dimensional Requirements IEC-286-6 and EIAJ 7201)

Packaging

KE Home Search FA

s Technical Articles Contact Us

Hel

Created: 04/17/2000 Product: Ceramic

Updated: 08/28/2009 Categories: Labeling, Packaging, Part Markings, Part Numbe

KEMET Ceramic P/N Suffixes - Marking & Packaging

Description :

KEMET Ceramic P/N Suffixes - Marking & Packaging

Answer :

KEMET ceramic chips are available marked or unmarked (preferred) in several packaging styles. These ordering

details are included as suf fi x es to t he KEMET 14 digit part number, and will be used during the order entry

process by KEMET sales personnel and distributors. (Notice that orderin g a KEMET part number without a suffix

will result in shipment of unma r ked chips loose packed in a bag - so be sure to use a suffix if other packaging is

needed.)

To speed up the ordering proce ss, we use "shortcut" suffixes for the most common ordering modes. The most

popular shortcut ordering suffix is "TU", which indicates unmarked chips, in labelled 7" tape & reel packaging.

lternatively, ordering suffix "TM" indicates marked chips, in labelled 7" reels. However, rememb er th at marke d

chips are less likely to be in stock, and will have a cost premium associated with marking. Det ails on marking

appear in our catalog, available on the website. Note that all 0402 chips and all Y5V chips are not available

marked.

Other special ordering suffixes also exist, covering options such as 13" reels, bulk casset t e, and bulk in bag

packaging. In addition, special customer requirements will also be included in custom ordering suffixes, up to 2

groups of 4 numerical digits each.

When the capacitors are shippe d , the labels will be print ed with the 14 digit KEMET part number, plus the

numerical suffixes ordered (or corresponding to the shortcut suffixes). These will incl ude one or more 4 digit

numerical suffix(es), wh ich indicate the exact mode of marki ng and packaging. These will be based on the

information given to KEMET sales at the time of order entry, and and are detailed in the following table. (Note - to

improve delivery, marked chips may occasionally be supplied when unmarked are acceptable.)

CATEGORY DESCRIPTION Unmarked Marking Required

(Marking not available for

any 0402 or Y5V chips)

Standard Reeling

7" Plastic Tape 0805 - 2225 (0402, 0603 &

0805 thickness DB, DC & DD

are reeled only on paper)

7800 (same a s "TU") 7025 (same as "TM")

Standard Reeling

7" Paper Tape 0 402 & 0603 7867(same as "TU " ) 7013(same as "TM")

Special Reeling

13" Plastic Tape 0805 - 2225 (0402, 0603 &

0805 thickness DB, DC & DD

are reeled only on paper)

7210 7215

Special Reeling

7" Paper Tape 0805 (0.78 mm thickness -

selected values only) 7867 & 9239 7013 & 9239

Special Reeling

7" Paper Tape 1206 - 1210 (selected values

only) 7867 7013

Special Reeling

13" Paper Tape 0402 & 0603 7411 7040

Special Reeling

13" Paper Tape 0805 (0.78 mm thickness -

selected values only) 7411 & 9239 7040 & 9239

Special Reeling

13" Paper Tape 1206 - 1210 (selected values

only) 7411 7040

Special Packaging

Bulk Cassette for

0402, 0603 & 0805.

0402's are never

marked.

Use ONLY with special 0.6

mm 0805. 9028 9028 & 3325

Special Packaging

Loose Chips in Plastic

Bags

0603 - 2225 No Suffix 3325

Technical Papers featured

at CARTS Europe 2007 :

Click here for a full listing

of our Technical Papers

Aluminium Electrolytic Capacitors' performance in Very High Ripple

Current and Temperature Applications

Reliability and Critical Applications of Tantalum Capacitors

BME C0G MLCCs: The High Capa citanc e Class-I Solution

Soldering of SMD Film Capacitors in Practical Lead Free

Processes

D-Pack 3D Interposer Decoupling System

Study of MnO2 Coverage on Ta Capacitors with High CV Powders

ESR Stabilization of Ta Capacitors for Automotive Applications in

Severe Environmental Conditions

The Battle for Maximum Volumetric Efficiency - Part 1: When

Technologies Compete, Customers Win

Improved Ripple Current Capability with Facedown Terminations

The Battle for Maximum Volumetric Efficiency - Part 2:

Advancements in Solid Electrolyte Capacitors

Search here for KEMET P N, Competitor PN, Partial PN, or Part Description

Search here for General Keywords, Part Series, or Corporate I nformation

e 1 of 2KEMET Electronics - KEMET Ceramic P/N Suffixes - Markin

& Packa

8/28/2009htt

://www.kemet.com/kemet/web/home

e/kfbk3.nsf/vaFeedbackFAQ/3B46726C01571...

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300

CERAMIC CHIP/CAPACITORS

Tin Lead L Termination

C0805 C103 K 5 R A L*

CERAMIC

SIZE CODE

SPECIFICATION

C - Standard

CAPACITANCE CODE

Expressed in Picofarads (pF)

First two digits represent significant figures.

Third digit specifies number of zeros. (Use 9

for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF)

(Example: 2.2pF = 229 or 0.50 pF = 508)

CAPACITANCE TOLERANCE

B – ±0.10pF J – ±5%

C – ±0.25pF K – ±10%

D – ±0.5pF M – ±20%

F – ±1%

G – ±2%

DIMENSIONS—MILLIMETERS AND (INCHES)

CAPACITOR ORDERING INFORMATION

CAPACITOR OUTLINE DRAWINGS

END METALLIZATION

L - SnPb plated nickel barrier

(SnPb 5% minimum)

FAILURE RATE LEVEL

A- Not Applicable

TEMPERATURE CHARACTERISTIC

Designated by Capacitance

Change Over Temperature Range

G – C0G (NP0) (±30 PPM/°C)

R – X7R (±15%) (-55°C + 125°C)

P – X5R (±15%) (-55°C + 85°C)

VOLTAGE

1 - 100V 3 - 25V

2 - 200V 4 - 16V

5 - 50V 8 - 10V

9 - 6.3V

* Part Number Example: C0805C103K5RAL (14 digits - no spaces)

* Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk cassette, see page 96.)

† For extended value 1210 case size

– solder reflow only.

(Standard Chips - For

Military see page 87)

KEMET’s line of Tin/Lead termination commercial MLCC surface mount capacitors are designed to meet the needs of the

commercial, high reliability, and military customer applications where Tin/Lead plating is required. KEMET’s Tin/Lead elec-

troplating process is designed to meet a 5% minimum lead content in the termination of the component. As the bulk of the

electronics industry marches to RoHS compliance it is important that KEMET provide the Tin/Lead terminated products for

our valued high reliability and military customers.

KEMET Tiin/Lead MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard

capacitance values in X7R, X5R, C0G dielectrics. Voltage ratings range from 6.3V to 200V. To order the Tin/Lead termina-

tions indicate an “L” in the 14th digit of the part number. For additional dielectrics and voltage ratings please contact the fac-

tory or local Sales personnel.

FEATURES

Refer to pages 73-76 for NP0/C0G, X7R and X5R dielectric capacitance ranges available.

CONDUCTIVE METALLIZATIONELECTRODES

Sn/Pb PLATE

NICKEL PLATE

KEMET Tin/Lead MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard

capacitance values in X7R and C0G dielectrics. Voltage ratings range from 6.3V to 200V. To order the Tin/Lead terminations

indicate an “L” in the 14th digit of the part number. To request the L Series termination for other surface mount product lines (Open

Mode, High Voltage, Arrays, etc.) or for additional dielectrics and higher voltage ratings, please contact the factory or local Sales

representative.

Ceramic Surface Mount

6 - 35V