14100 McCormick Drive Tampa, FL 33626 866.TECH.EMI (866.832.4364) T: 813.855.6921 F: 813.855.3291
www.leadertechinc.com
The Leading Source for EMI Shielding
Reliable Board, Enclosure and Cable Solutions
Shielded enclosures for RF radiations from PCB components stop RF
energy right at the source, eliminating re-radiation and interference with
other nearby components as well as reducing the number of other
shielding expenditures such as filters, gaskets and RF hardening of the
equipment exterior structure.
The addition of a frequency-tuned absorber membrane layer adds
unprecedented performance, assimilating radiated energy without relying
on repeated reflections from the interior surfaces of the shield, and
without problems of harmonic resonance. Refer to sketches at right.
Reflective Shield
RF Absorber Shield
RF Absorber Shield
RF Absorber Shield
RF Absorber Shield
Adhesive Mount Option
PCB shielded enclosures with RF absorbers
The versatile shield design includes a solderable fence and tight-fitting
cover assembly of copper alloy 770 (C77000), a tough solder-compatible
material which does not require plating nor has corrosion prone bare
edges. The removable cover provides convenient access to circuitry; and
is very cost-effective due to the use of universal multi-use manufacturing
tooling.
modular fence and cover design
Each enclosure shield size can be combined with frequency-specific
absorber material bonded to the cover interior for exacting remediation of
otherwise errant frequency emanations - a selection of five EMC
absorbers effective from 50 MHz to 1 GHz along with an extra wideband
version effective from 40 MHz to 5 GHz; and, ten Microwave versions
effective up to 116 GHz.
custom tuning to the exact frequency
Five frequency-specific formulations.
EMC standard series – 50MHz to 1GHz
40MHz TO 5GHz @ 3.2GHz PEAK.
This all-around universal wideband
formula is available in a standard temperature type and a high
temperature type (up to 200˚C). Excellent performance from 40MHz to
5GHz (PS3200EMC series, opposite page).
EMC extra wideband series
Typical shielding approach allows
reflected radiation to affect neighboring
components.
Reflective Shield
RF Absorber Shield
RF Absorber Shield
RF Absorber Shield
RF Absorber Shield
Adhesive Mount Option
Reflective Shield
RF Absorber Shield
RF Absorber Shield
RF Absorber Shield
RF Absorber Shield
Adhesive Mount Option
PCB Shield effectiveness can be further
enhanced by adding RF absorber
material under PCB (see pages 30-34).
RF absorber approach assimilates
radiated frequencies and converts to
imperceptible heat energy. Specific
frequency-tuned absorber material is
bonded to the lid interior. A wide range of
EMC and Microwave absorbers can be
specified from 40 MHz up to 116 GHz.
Frequency range 50 MHz - 1 GHz
Peak frequency choices 100, 300, 400, 500 or 800 MHz
Temperature range -20˚C to 100˚C
Flammability rating UL94-V0
Adhesive: temperature 0˚F to 180˚F -18˚C to 83˚C ASTM D-3575
tack 8.4 p.s.i. (stainless steel) ASTM D-3575
shear 300+ hrs. @ 2 p.s.i. @ 22˚C ASTM D-3575
Dimensions: standard 15.75” W x 15.75 “ L x .011” max.
400,0 x 400,0 x 0,28
maximum 3’-0” W x 65’-0” L x .011” max
1,0 x 20,0 M x 0,28
Material Characteristic Measure
absorber membrane specifications
RF absorber membrane partially detached
from lid for exhibit purpose only.
pin mount
Frequency range 40 MHz - 5 GHz
Peak frequency 3.2 GHz
Temperature range -20˚C to 100˚C and -10˚C to 200˚C (high temp)
Flammability rating UL94-V0
Adhesive: standard temp. 0˚F to 180˚F -18˚C to 83˚C ASTM D-3575
high temp. 50˚F to 312˚F 10˚C to 200˚C ASTM D-3575
tack 8.4 p.s.i. (stainless steel standard) ASTM D-3575
8.3 p.s.i. (stainless steel high temperature) ASTM D-3575
shear 300+ hrs. @ 2 p.s.i. @ 22˚C ASTM D-3575
Dimensions: standard 8.25” W x 15.75 “ L x .004” max.
210,0 x 400,0 x 0,10
maximum 3’-0” W x 65’-0” L x .004” max
1,0 x 20,0 M x 0,10
Material Characteristic Measure
14100 McCormick Drive Tampa, FL 33626 866.TECH.EMI (866.832.4364) T: 813.855.6921 F: 813.855.3291
www.leadertechinc.com
The Leading Source for EMI Shielding
Reliable Board, Enclosure and Cable Solutions
Frequency range 2.0 MHz - 116.0 GHz
Peak frequency choices
2.4, 5.8, 10, 18, 24, 26, 38, 60, 76, 110 GHz
Temperature range -20˚C to 110˚C
Flammability rating UL94-V0
Adhesive: temperature 0˚F to 180˚F -18˚C to 83˚C ASTM D-3575
tack 8.4 p.s.i. (stainless steel) ASTM D-3575
shear 300+ hrs. @ 2 p.s.i. @ 22˚C ASTM D-3575
Dimensions: standard 7.875” W x 15.75 “ L x .138” max.200,0 x 400,0 x 3,5
maximum 3’-0” W x 65’-0” L x .138” max 1,0 x 20,0 M x 3,5
Material Characteristic Measure
The MA series is a high frequency microwave noise absorber in a range
of formulations addressing 2.0GHz to 116GHz radiations from electronic
components.
Microwave series: – up to 116 GHz
adhesive mount
THROUGH-HOLE OR ADHESIVE MOUNT – UP TO 5GHz.
The EMC series is
available in three standard sizes; each can be combined with an absorber
layer bonded to the inside of the lid in seven choices including the “3200”
extra wideband absorber with effective characteristics from 40 MHz
through 5 GHz, which is also available in a high temperature version.
Refer to page 28 for absorber material characteristics, and page 29 for
typical absorption rates by frequency.
For recommended Mounting Hole Patterns, visit our web site at
www.ferrishield.com under PCB Shield Enclosures and click on link PCB
Mounting Hole Patterns. Adhesive mount option provides quick
installation, easy retrofit.
EMC type PCB shield enclosures
PS100EMC24 PS100EMC24A 1.00 25,4 2.00 50,8 .198 5,0 .100 2,5 .500 12,7 50 MHz to 1 GHz 100 MHz @ -17.3 dB
PS300EMC24 PS300EMC24A 1.00 25,4 2.00 50,8 .198 5,0 .100 2,5 .500 12,7 50 MHz to 1 GHz 300 MHz @ -17.6 dB
PS400EMC24 PS400EMC24A 1.00 25,4 2.00 50,8 .198 5,0 .100 2,5 .500 12,7 50 MHz to 1 GHz 400 MHz @ -17.2 dB
PS500EMC24 PS500EMC24A 1.00 25,4 2.00 50,8 .189 4,8 .100 2,5 .500 12,7 50 MHz to 1 GHz 500 MHz @ -17.8 dB
PS800EMC24 PS800EMC24A 1.00 25,4 2.00 50,8 .192 4,9 .100 2,5 .500 12,7 50 MHz to 1 GHz 800 MHz @ -17.9 dB
PS3200EMC24 PS3200EMC24A 1.00 25,4 2.00 50,8 .196 5,0 .100 2,5 .500 12,7 40 MHz to 5 GHz 3.2 GHz @ -31.3 dB
PS3200EMC24H* PS3200EMC24HA* 1.00 25,4 2.00 50,8 .196 5,0 .100 2,5 .500 12,7 40 MHz to 5 GHz 3.2 GHz @ -31.3 dB
PSEMC24 PSEMC24A (w/o absorber) 1.00 25,4 2.00 50,8 .200 5,1 .100 2,5 .500 12,7 50 MHz to 1 GHz 100 MHz @ -5.3 dB
PS100EMC44 PS100EMC44A 2.00 50,8 3.00 76,2 .398 10,1 .120 3,0 .500 12,7 50 MHz to 1 GHz 100 MHz @ -17.3 dB
PS300EMC44 PS300EMC44A 2.00 50,8 3.00 76,2 .398 10,1 .120 3,0 .500 12,7 50 MHz to 1 GHz 300 MHz @ -17.6 dB
PS400EMC44 PS400EMC44A 2.00 50,8 3.00 76,2 .398 10,1 .120 3,0 .500 12,7 50 MHz to 1 GHz 400 MHz @ -17.2 dB
PS500EMC44 PS500EMC44A 2.00 50,8 3.00 76,2 .389 9,9 .120 3,0 .500 12,7 50 MHz to 1 GHz 500 MHz @ -17.8 dB
PS800EMC44 PS800EMC44A 2.00 50,8 3.00 76,2 .392 10,0 .120 3,0 .500 12,7 50 MHz to 1 GHz 800 MHz @ -17.9 dB
PS3200EMC44 PS3200EMC44A 2.00 50,8 3.00 76,2 .396 10,1 .120 3,0 .500 12,7 40 MHz to 5 GHz 3.2 GHz @ -31.3 dB
PS3200EMC44H* PS3200EMC44HA* 2.00 50,8 3.00 76,2 .396 10,1 .120 3,0 .500 12,7 40 MHz to 5 GHz 3.2 GHz @ -31.3 dB
PSEMC44 PSEMC44A (w/o absorber) 2.00 50,8 3.00 76,2 .400 10,2 .120 3,0 .500 12,7 50 MHz to 1 GHz 100 MHz @ -5.3 dB
PS100EMC59 PS100EMC59A 3.00 76,2 4.50 114,3 .498 12,6 .120 3,0 .250 6,4 50 MHz to 1 GHz 100 MHz @ -17.3 dB
PS300EMC59 PS300EMC59A 3.00 76,2 4.50 114,3 .498 12,6 .120 3,0 .250 6,4 50 MHz to 1 GHz 300 MHz @ -17.6 dB
PS400EMC59 PS400EMC59A 3.00 76,2 4.50 114,3 .498 12,6 .120 3,0 .250 6,4 50 MHz to 1 GHz 400 MHz @ -17.2 dB
PS500EMC59 PS500EMC59A 3.00 76,2 4.50 114,3 .489 12,4 .120 3,0 .250 6,4 50 MHz to 1 GHz 500 MHz @ -17.8 dB
PS800EMC59 PS800EMC59A 3.00 76,2 4.50 114,3 .492 12,5 .120 3,0 .250 6,4 50 MHz to 1 GHz 800 MHz @ -17.9 dB
PS3200EMC59 PS3200EMC59A 3.00 76,2 4.50 114,3 .496 12,6 .120 3,0 .250 6,4 40 MHz to 5 GHz 3.2 GHz @ -31.3 dB
PS3200EMC59H* PS3200EMC59HA* 3.00 76,2 4.50 114,3 .496 12,6 .120 3,0 .250 6,4 40 MHz to 5 GHz 3.2 GHz @ -31.3 dB
PSEMC59 PSEMC59A (w/o absorber) 3.00 76,2 4.50 114,3 .500 12,7 .120 3,0 .250 6,4 50 MHz to 1 GHz 100 MHz @ -5.3 dB
PART No. Adhesive Mount A B C D E
Frequency Range Peak Frequency Attenuation
B
A
ED
C
Internal Absorber Layer
Through-hole mount – recommended hole size .050” (1,27mm)
Surface mount – pins formed w/ 90˚ outward bend,
add “SM” suffix to the part #
Adhesive mount – no holes required
Board to
Absorber
pin length
.040" (1,02mm)
*NOTE: “H” variations of these “PS3200EMC” types are the high temperature version
14100 McCormick Drive Tampa, FL 33626 866.TECH.EMI (866.832.4364) T: 813.855.6921 F: 813.855.3291
www.leadertechinc.com
The Leading Source for EMI Shielding
Reliable Board, Enclosure and Cable Solutions
THROUGH-HOLE OR ADHESIVE MOUNT – UP TO 116GHz.
The microwave
series is available in three standard sizes; each can be combined with an
absorber membrane bonded to the lid. There are ten types of frequency-
sensitive absorber materials with effectiveness up to 116 GHz. The multi-
layered absorbers of screened matrixes are tuned for discrete impedance
matching to absorb microwaves from a wide range of angles. Refer to
page 30 for absorber material characteristics, and to page 31 for typical
absorption rates by frequency.
For recommended Mounting Hole Patterns, visit our web site at
www.ferrishield.com under PCB Shield Enclosures and click on link PCB
Mounting Hole Patterns. Adhesive mount option provides quick
installation, easy retrofit.
microwave type PCB shield enclosures
PS24MA24 PS24MA24A 1.00 25,4 2.00 50,8 .062 1,6 .100 2,5 .500 12,7 2.2 - 2.6 GHz 2.4 GHz @ -21.0 dB
PS58MA24 PS58MA24A 1.00 25,4 2.00 50,8 .100 2,5 .100 2,5 .500 12,7 5.5 - 6.2 GHz 5.8 GHz @ -23.5 dB
PS100MA24 PS100MA24A 1.00 25,4 2.00 50,8 .145 3,7 .100 2,5 .500 12,7 9.2 - 10.8 GHz 10.0 GHz @ -23.5 dB
PS180MA24 PS180MA24A 1.00 25,4 2.00 50,8 .160 4,1 .100 2,5 .500 12,7 16.5 - 19.5 GHz 18.0 GHz @ -24.1 dB
PS240MA24 PS240MA24A 1.00 25,4 2.00 50,8 .176 4,5 .100 2,5 .500 12,7 22.5 - 25.5 GHz 24.0 GHz @ -24.3 dB
PS260MA24 PS260MA24A 1.00 25,4 2.00 50,8 .173 4,4 .100 2,5 .500 12,7 25.2 - 27.0 GHz 26.0 GHz @ -21.4 dB
PS380MA24 PS380MA24A 1.00 25,4 2.00 50,8 .176 4,5 .100 2,5 .500 12,7 35.8 - 40.2 GHz 38.0 GHz @ -21.4 dB
PS600MA24 PS600MA24A 1.00 25,4 2.00 50,8 .165 4,2 .100 2,5 .500 12,7 52.0 - 64.2 GHz 60.0 GHz @ -21.6 dB
PS760MA24 PS760MA24A 1.00 25,4 2.00 50,8 .184 4,7 .100 2,5 .500 12,7 72.0 - 80.0 GHz 76.0 GHz @ -20.0 dB
PS1100MA24 PS1100MA24A 1.00 25,4 2.00 50,8 .184 4,7 .100 2,5 .500 12,7 104.0 - 116.0 GHz 110.0 GHz @ -21.2 dB
PS24MA44 PS24MA44A 2.00 50,8 3.00 76,2 .262 6,7 .120 3,0 .500 12,7 2.2 - 2.6 GHz 2.4 GHz @ -21.0 dB
PS58MA44 PS58MA44A 2.00 50,8 3.00 76,2 .300 7,6 .120 3,0 .500 12,7 5.5 - 6.2 GHz 5.8 GHz @ -23.5 dB
PS100MA44 PS100MA44A 2.00 50,8 3.00 76,2 .345 8,8 .120 3,0 .500 12,7 9.2 - 10.8 GHz 10.0 GHz @ -23.5 dB
PS180MA44 PS180MA44A 2.00 50,8 3.00 76,2 .360 9,1 .120 3,0 .500 12,7 16.5 - 19.5 GHz 18.0 GHz @ -24.1 dB
PS240MA44 PS240MA44A 2.00 50,8 3.00 76,2 .376 9,6 .120 3,0 .500 12,7 22.5 - 25.5 GHz 24.0 GHz @ -24.3 dB
PS260MA44 PS260MA44A 2.00 50,8 3.00 76,2 .373 9,5 .120 3,0 .500 12,7 25.2 - 27.0 GHz 26.0 GHz @ -21.4 dB
PS380MA44 PS380MA44A 2.00 50,8 3.00 76,2 .376 9,6 .120 3,0 .500 12,7 35.8 - 40.2 GHz 38.0 GHz @ -21.4 dB
PS600MA44 PS600MA44A 2.00 50,8 3.00 76,2 .365 9,3 .120 3,0 .500 12,7 52.0 - 64.2 GHz 60.0 GHz @ -21.6 dB
PS760MA44 PS760MA44A 2.00 50,8 3.00 76,2 .384 9,8 .120 3,0 .500 12,7 72.0 - 80.0 GHz 76.0 GHz @ -20.0 dB
PS1100MA44 PS1100MA44A 2.00 50,8 3.00 76,2 .384 9,8 .120 3,0 .500 12,7 104.0 - 116.0 GHz 110.0 GHz @ -21.2 dB
PS24MA59 PS24MA59A 3.00 76,2 4.50 114,3 .362 9,2 .120 3,0 .250 6,4 2.2 - 2.6 GHz 2.4 GHz @ -21.0 dB
PS58MA59 PS58MA59A 3.00 76,2 4.50 114,3 .400 10,2 .120 3,0 .250 6,4 5.5 - 6.2 GHz 5.8 GHz @ -23.5 dB
PS100MA59 PS100MA59A 3.00 76,2 4.50 114,3 .445 11,3 .120 3,0 .250 6,4 9.2 - 10.8 GHz 10.0 GHz @ -23.5 dB
PS180MA59 PS180MA59A 3.00 76,2 4.50 114,3 .460 11,7 .120 3,0 .250 6,4 16.5 - 19.5 GHz 18.0 GHz @ -24.1 dB
PS240MA59 PS240MA59A 3.00 76,2 4.50 114,3 .476 12,1 .120 3,0 .250 6,4 22.5 - 25.5 GHz 24.0 GHz @ -24.3 dB
PS260MA59 PS260MA59A 3.00 76,2 4.50 114,3 .473 12,0 .120 3,0 .250 6,4 25.2 - 27.0 GHz 26.0 GHz @ -21.4 dB
PS380MA59 PS380MA59A 3.00 76,2 4.50 114,3 .47612,1 .120 3,0 .250 6,4 35.8 - 40.2 GHz 38.0 GHz @ -21.4 dB
PS600MA59 PS600MA59A 3.00 76,2 4.50 114,3 .465 11,8 .120 3,0 .250 6,4 52.0 - 64.2 GHz 60.0 GHz @ -21.6 dB
PS760MA59 PS760MA59A 3.00 76,2 4.50 114,3 .484 12,3 .120 3,0 .250 6,4 72.0 - 80.0 GHz 76.0 GHz @ -20.0 dB
PS1100MA59 PS1100MA59A 3.00 76,2 4.50 114,3 .484 12,3 .120 3,0 .250 6,4 104.0 - 116.0 GHz 110.0 GHz @ -21.2 dB
PART No. Adhesive Mount A B C D E
Frequency Range Peak Frequency Attenuation
B
A
ED
C
Internal Absorber Layer
Through-hole mount – recommended hole size .050” (1,27mm)
Surface mount – pins formed w/ 90˚ outward bend,
add “SM” suffix to the part #
Adhesive mount – no holes required
Board to
Absorber
pin length
.040" (1,02mm)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
LeaderTech:
PS3200EMC24HA PS180MA59A PS380MA59A PS100EMC59A PS500EMC59A PS800EMC59A PS240MA44
PS240MA24 PS400EMC59A PS240MA59 PS100MA24 PS600MA24 PS600MA44 PS100MA44 PS600MA59
PS100MA59 PS800EMC44A PS400EMC44A PS500EMC44A PS24MA44 PS24MA24 PS100EMC44A PS24MA59
PS800EMC24A PS180MA59 PS380MA59 PS180MA24 PS380MA24 PS380MA44 PS180MA44 PS58MA24
PS58MA44 PS400EMC44SM PS300EMC24A PS58MA59 PS100EMC24A PS500EMC24A PS3200EMC59HA
PS1100MA44A PS760MA59A PS100MA59A PS260MA59A PS240MA59A PS600MA59A PS3200EMC24
PS3200EMC44 PS3200EMC59 PS1100MA24A PS760MA24A PS100MA24A PS260MA24A PS600MA24A
PS800EMC59 PS400EMC59 PS500EMC59 PS100EMC59 PS500EMC44 PS100EMC44 PS300EMC44
PS400EMC44 PS800EMC44 PS100EMC24 PS500EMC24 PS300EMC24 PS400EMC24 PS800EMC24
PS3200EMC44HA PS3200EMC44SM PS1100MA59A PS500EMC44SM PS100MA44A PS760MA44A
PS260MA44A PS240MA44A PS600MA44A PS100EMC44SM PS1100MA44 PS1100MA24 PS1100MA59
PS380MA44A PS180MA44A PS760MA44 PS260MA44 PS260MA24 PS760MA24 PS760MA59 PS260MA59
PS380MA24A PS180MA24A PS3200EMC44HSM PS3200EMC44A PS3200EMC44H PS24MA24A
PS3200EMC24A PS3200EMC24H PS58MA59A PS24MA44A PS58MA44A PS3200EMC59A PS3200EMC59H
