(0,635 mm) .025"
6QDP SERIES
30 AWG
twinax ribbon cable
6QDP–032–06.0–STR–TTR–2 6QDP–016–06.0–STR–TBR–3–B
Differential
Pair routing
Increased
Insertion Depth
WWW.SAMTEC.COM
Mates with:
QMS-DP, QFS-DP
SPECIFICATIONS
For complete specifi cations see
www.samtec.com?6QDP
Cable:
30 AWG
twinax micro ribbon
Signal Routing:
100Ω Differential
Cable Bending Radius:
(11,11 mm) 7/16" min
Plating:
Au over 50µ" (1,27 µm) Ni
Current Rating:
700 mA per pin
(6 adjacent pins powered)
Propagation Delay:
4.67 nsec/meter
Operating Temp Range:
-40°C to +105°C
Skew (pair-to-pair):
<10 ps/ft
Skew (within a pair):
<5 ps/ft
EMI Performance:
FCC Class A
RoHS Compliant:
Ye s
NO. OF
PAIRS
END
NO. 1
WIRE
LENGTH
END
NO. 2
Specify
END
ASSEMBLIES
from chart
WIRING
OPTION
–1
= Pin 1 to
Pin 1
–2
= Pin 1 to
Pin 2
–3
= Pin 1 to
Second
Last Pin
–4
= Pin 1 to
Last Pin
SCREW
OPTION
Leave
blank for
no Screw
Option
–F
= End No. 1
–S
= End No. 2
–B
= Both
Ends
–“XX.X”
= Wire Length
in Inches
(43,7 mm) 01.7"
minimum
(7,47)
.294
OAL = Wire Length + L
Wire Length
±(1,27) .050
END NO. 1
(-TTL SHOWN)
END NO. 2
(-STR SHOWN)
6QDP
= Unshielded
mates with
QMS-DP/QFS-DP
–016,
–032,
–048,
–064
TYPE
Note:
This Series is non-standard,
non-returnable.
Note:
Design your High Speed
Cable with Samtec’s High
Speed Cable Solutionator®
at www.samtec.com/hdr
Note:
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
APPLICATIONS
Processing conditions will
affect mated height.
(15,11)
.595
APPLICATIONS
HIGH SPEED TWINAX CABLE ASSEMBLIES
F-213 SUPPLEMENT (Rev 25NOV13)
END TO END L
Surface Mount to
Surface Mount
(23,88)
.940
WIRING REQUIREMENTS
WIRING
OPTION END OPTIONS
1 or 2
TTR, TBL, STL, SBR to
TTR, TBL, STL, SBR
or
TTL, TBR, STR, SBL to
TTL, TBR, STR, SBL
3 or 4
TTL, TBR, STR, SBL to
TTR, TBL, STL, SBR
or
TTR, TBL, STL, SBR to
TTL, TBR, STR, SBL
SURFACE MOUNT
ASSEMBLY END 1 END 2
–TTR =Terminal,
Top, Notch Right
–TTL = Terminal,
Top, Notch Left
–TBR = Terminal,
Bottom, Notch Right
–TBL = Terminal,
Bottom, Notch Left
–STR = Socket, Top,
Notch Right
–STL = Socket, Top,
Notch Left
–SBR = Socket,
Bottom, Notch Right
–SBL = Socket,
Bottom, Notch Left
064 064
001001
064 06
4
001 001
001
001
064 064
001 001
064
064
ALSO AVAILABLE
(MOV Required)
• Other pin counts
• Other terminations
Contact Samtec.
